Can you get the plan headphones with a remote(like you do when you first buy a smaller gb ipod)? if so how much do they rage and where can you order then?
i've been having a hard time just finding a good/not over 30$ headphones that will go with cause the the headphones i
got are dead and not working no longer and you know parents or anyone these's days that are not willing to go
buy something that isnt rescearched yet! and i even want a good pair but not have to spend 70$ on them and to
know they might stop working in the next month/year or two!!
That's a 3rd gen iPod shuffle, so do not get the new Apple EarPod headphones. Based on posts I've read here, they do not work with the 3rd gen shuffle.
You can still find the old version of the Apple headphones with remote, at online stores like Amazon. They are like the one that came with your shuffle, except they usually have a microphone on the remote nub.
Alternately, you can use something like this adapter with remote controls
http://www.amazon.com/iLuv-iEA15BLK-3rd-Party-Headphone-VoiceOver/dp/B002RL9WDQ
and connect ANY headphones.
Similar Messages
-
I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?
Presumably the mains cable, which you can get from an Apple Store.
-
I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?
A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan -
Can't get the plan cost in the service order!
Dear experts,
I create a service order from a service Notification,in the service order , I assign a work center, activity type and work to Operations,however I can't get the plan cost in the Costs tab, when I use the T-code:IW42 confirm the service order, It can get this actual cost! I have maintain the activity type,I don't know why can't get the plan cost?
thanks
LanceHello,
Have you maintianed the activity pricing? I think the transaction is KP26.
Prase -
Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?
If you no longer have the phone or have any Backup of it at all, you can re-download your apps and your content from the iTunes Store by logging into your Apple ID at settings> iTunes & App Store. Unfortunately you can no longer recover the data that was associated with those apps.
So far as your photos go, you can recover any photos that were in photo stream and taken less than 30 days ago by logging in with your Apple ID to settings> iCloud> photos. Unfortunately you will be unable to recover any photos from your camera roll. -
How can I get the standard Adobe CS4 sample templates, like the photo slideshow? Thanks
I just got Flash CS4. I think it is supposed to have several categories of templates. I only have the advertising category. How can I get the standard Adobe CS4 sample templates, like the photo slideshow? I cannot find anyplace on the Adobe.com site for template downloads.
Thanks
MarkI have the same question-- I don't see any template categories apart from "Advertising"-- where are they?
- Jesse -
How can i get the time detail with messageDateField ?
Is there any common way of getting the time info with messageDateField ? As far as i research, there is no way of adding the time support of messageDateField such that it can be enabled by setting a parameter to true like getTime="true". Thanks.
Fatih ERSebahattin,
You can display the time component by adding the timeStyle attribute:
<onSubmitValidater>
<date dateStyle="shortish" timeStyle="short" />
</onSubmitValidater>
Unfortunately, in the current release, when you save the date, the time will be lost. We have fixed this for the next release. As a work around, you can continue the route you have chosen with a separate time field.
To get the time value in your entity object you can add a transient attribute "time" to both your VO and EO. In the UIX page, you create a field with the same name and set persistent="true". Now, the JHeadstart save process will simply send the time field to your EO through your VO, and you can use it to add the time component to your date field.
Steven davelaar. -
How can I get the element value with namespace?
I tried to get a element value in xml has namespace but i can't.
I removed the namespace, i can get a element value.
How can i get a element value with namespace?
--1. Error ----------- xml ------------------------------
<?xml version="1.0" encoding="UTF-8"?>
*<TaxInvoice xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0 http://www.kec.or.kr/standard/Tax/TaxInvoiceSchemaModule_1.0.xsd">*
<ExchangedDocument>
<IssueDateTime>20110810133213</IssueDateTime>
<ReferencedDocument>
<ID>318701-0002</ID>
</ReferencedDocument>
</ExchangedDocument>
<TaxInvoiceDocument>
<IssueID>201106294100</IssueID>
<TypeCode>0101</TypeCode>
<IssueDateTime>20110810</IssueDateTime>
<PurposeCode>02</PurposeCode>
</TaxInvoiceDocument>
<TaxInvoiceTradeLineItem>
<SequenceNumeric>1</SequenceNumeric>
<InvoiceAmount>200000000</InvoiceAmount>
<TotalTax>
<CalculatedAmount>20000000</CalculatedAmount>
</TotalTax>
</TaxInvoiceTradeLineItem>
</TaxInvoice>
--2. sucess ----------- xml ---------remove namespace---------------------
<?xml version="1.0" encoding="UTF-8"?>
<TaxInvoice>
<ExchangedDocument>
<IssueDateTime>20110810133213</IssueDateTime>
<ReferencedDocument>
<ID>318701-0002</ID>
</ReferencedDocument>
</ExchangedDocument>
<TaxInvoiceDocument>
<IssueID>201106294100</IssueID>
<TypeCode>0101</TypeCode>
<IssueDateTime>20110810</IssueDateTime>
<PurposeCode>02</PurposeCode>
</TaxInvoiceDocument>
<TaxInvoiceTradeLineItem>
<SequenceNumeric>1</SequenceNumeric>
<InvoiceAmount>200000000</InvoiceAmount>
<TotalTax>
<CalculatedAmount>20000000</CalculatedAmount>
</TotalTax>
</TaxInvoiceTradeLineItem>
</TaxInvoice>
---------- program ------------
procedure insert_table
l_clob clob,
wellformed out boolean,
error out varchar2
is
l_parser dbms_xmlparser.Parser;
xmldoc xmldom.domdocument;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_root DBMS_XMLDOM.domelement;
l_node DBMS_XMLDOM.domnode;
l_node2 DBMS_XMLDOM.domnode;
l_text DBMS_XMLDOM.DOMTEXT;
buf VARCHAR2(30000);
xmlparseerror exception;
TYPE tab_type is Table of xml_upload%ROWTYPE;
t_tab tab_type := tab_type();
pragma exception_init(xmlparseerror, -20100);
l_node_name varchar2(300);
begin
l_parser := dbms_xmlparser.newParser;
l_doc := DBMS_XMLDOM.newdomdocument;
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
l_n := dbms_xmldom.makeNode(l_doc);
l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');
FOR cur_tax In 0..dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_tax);
t_tab.extend;
t_tab(t_tab.last).ed_id := '5000000';
dbms_xslprocessor.valueOf(l_n, 'IssueID/text()', t_tab(t_tab.last).tid_issue_id);
dbms_xslprocessor.valueOf(l_n, 'TypeCode/text()', t_tab(t_tab.last).tid_type_code);
END LOOP;
FORALL i IN t_tab.first .. t_tab.last
INSERT INTO xml_upload VALUES t_tab(i);
COMMIT;
dbms_xmldom.freeDocument(l_doc);
wellformed := true;
exception
when xmlparseerror then
--xmlparser.freeparser(l_parser);
wellformed := false;
error := sqlerrm;
end insert_table;l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');try to change as follow
l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');Edited by: AlexAnd on Aug 17, 2011 12:36 AM -
How Can I Get The Cpu State With Java?
are there any method to use??
what's more,I also wanna to know how can I get
the current ram that the System is using
and the threads the System are running?
Will you please share your knowledge here or
write to tell me at [email protected]?
Thanks!!if you know how to do this in c++, you can write native methods and use them in java.
native methods forum:
http://forum.java.sun.com/forum.jsp?forum=52
tobias -
How can I get the same session with jdbc?
HI
After I create or use a JDBC connection,
i do a query.
How can I get the same session next time?
thanks a lot!Hi qin,
Unless I have misunderstood your question, a 'connection' and a 'session' are the same thing. When you obtain a database connection, you have created a database session. Once you close that connection, the session dies -- it no longer exists. You cannot obtain the same 'session' when you get another database 'connection' (after you closed the first one).
Hope this answers your question.
Good Luck,
Avi. -
Hello all, I am getting the following message with some emails I receive:- HTML enabled email client required to read this email. I really don't understand this message, am non techy, would anyone know how I can open and read the email? Thanks very much for any help, Alex
In Mail I suggest you try 'View->Message->Plain text alternative'.
Why? In multipart/alternative messages, such as this, the text/plain version should precede the text/html version, but Toyota have swapped them around. By default mail clients display the second version, assuming it to be HTML.
Very strange. -
How to enable telemetry logs and where can i find the command line for sun
Hi i tried creating the telemetry logs directory but the logs are not being populated. i created the following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.
Also pl. tell me where can i get the command list for sun one messaging server to use the command line utility to list, delete mailboxes. also can i search for all the mailboxes under one domain name. if yes then which command i have to use.
thanks in advance.Hi,
Hi i tried creating the telemetry logs directory but
the logs are not being populated. i created the
following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.Make sure the permissions (ownership) on the user directory and the sub directory match those that messaging server uses - by default mailsrv:mail. This is the most common cause of the telemetry data not being created. The other thing to verify is that the user's account isn't stored as user@domain, otherwise you may need to create the directory as the entire user@domain (try both just to be sure).
Also pl. tell me where can i get the command list
for sun one messaging server to use the command line
utility to list, delete mailboxes. also can i search
for all the mailboxes under one domain name. if yes
then which command i have to use.The Messaging Server reference guide is a good place to start (lists all the command-line utilities/flags and what-not):
http://docs.sun.com/app/docs/doc/819-4429?l=en
The mboxutil command is used to list/create/delete mailboxes and you can use a pattern to only list those mailboxes in a specific domain.
Regards,
Shane.
thanks in advance. -
Can I get the new MacBook with a 1 tb Hard Drive?
Well very good looking the new (GOLD) MacBook announced on Monday 9 March 2015. But with just one USB-C port this means having a number of adapters with me at all times ---
But the big concern is whether I can get at least 1 tb of storage space. I have a 5 year old MB Pro with a 500 gb SSD and I removed the Optical Drive to install a 500 gb HD. Now 5 years later… Am I going to be limited to 8 gb of memory and 500 gb of storage space? Not a lot of progress there!
I know I can move to the 13" MacBook Pro and get more connection possibilities plus 16 gb of RAM and a 1 TB drive - but I would like to purchase the latest technology (especially since I keep my Macs a long time! - My 1989 SE is still running OS 6.0.4… --- OK I'm not planning on 26 year lifespans but hey, 5 years, yes, please!)
Any comments appreciated. I see where they say one can move to 1.3 gHz (turbo to 2.9) - but I don't see where to select that on the Apple Store -- and I see nothing about where to select 16 gb of RAM nor a 1 tb SSD.
Thanks for any comments or opinions or web links!
Best regards,
Steve Schulte
Monday 9 March 2015Wow this is a great reply! I did not mean to imply that I would consider or even imagine that a 5200 rpm Hard Drive or anything like that would work with the new MacBook – but what I had NOT considered was that a standard SSD like I have in my MBP-13" (2010 mode)l would also NOT FIT in this almost iPad thin new MacBook! Of course you are 100% right - it is going to be a real special flash drive -- and yet I am surprised that a 1 tb is not at least offered - even if for $400 or so more--- and I think this is so they have some way to differentiate the MacBook (new) with the MB Air and the MB Pro.
Certainly tempting! I will wait to see what Belkin and others offer as to docks - and also to see if Apple doesn't offer a 1 tb option within a year.
Thanks for your fine reply!!!!!!
Best regards,
Steve Schulte
Monday 9 March 2015 -
The text is in hebrew so the problem is that sometimes the quotation marks not in the right place.
For example i have this text: תווית
על בגד: ''תן לאישה לכבס. זה תפקידה''
This is the source original text you can see the quotations marks and they are not in the right place and all i did is copy paste.
And this is a screenshot of how this text looks like in the website in the original:
You can see now where the quotations marks should be.
Now this is how i'm using the text in my program:
First of all i'm using a webclient to download the page from the website and i'm also encoding it to windows-1255 since it's in hebrew.
using (var webClient = new WebClient())
webClient.Headers.Add("user-agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.0.3705;)");
byte[] myDataBuffer = webClient.DownloadData("http://rotter.net/scoopscache.html");
page = Encoding.GetEncoding("windows-1255").GetString(myDataBuffer);
Then i'm extracting the places i need by reading the html file lines and parsing the right text and it's link.
string loc;
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
List<string> lockedLinks1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
lockedThreads = new List<string>();
lockedLinks = new List<string>();
Regex textRegex = new Regex("ToolTip.*?(?=','<)");
string[] fall = File.ReadAllLines(filename);
for (int i = 0; i < fall.Length; i++)
if (fall[i].Contains("http://rotter.net") && fall[i].Contains("locked")||
fall[i].Contains("locked_icon_general") ||
fall[i].Contains("locked_icon_anchor") ||
fall[i].Contains("icon_anchor") ||
fall[i].Contains("locked_icon_fire") ||
fall[i].Contains("locked_icon_sport") ||
fall[i].Contains("locked_icon_camera") ||
fall[i].Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(fall[i + 2]))
if (m.Value.Contains("><b"))
loc = m.Value.Replace("\"><b", string.Empty);
lockedLinks.Add(loc);
string txt = fall[i - 1];
string text = textRegex.Match(txt).Value.Replace("ToolTip','", String.Empty);
if (text.Contains("’"))
text = text.Replace("’", string.Empty);
lockedThreads.Add(text);
Already here on the List lockedThreads you can see the quotation marks not in the right place as in the original:
After i'm parsing the text and links and adding them to the Lists in another class i'm doing a comparison using this Lists:
foreach (List<string> l_branch in ListsExtractions.responsers)
TreeNode l_node = treeView1.Nodes.Add(l_branch[l_branch.Count - 1]);
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
l_node.ImageIndex = 0;
l_node.SelectedImageIndex = 0;
for (int l_count = 0; l_count < l_branch.Count - 1; l_count++)
TreeNode l_subnode = l_node.Nodes.Add(l_branch[l_count]);
if (ListsExtractions.lockedThreads.Contains(l_subnode.Text))
l_subnode.ImageIndex = 0;
l_subnode.SelectedImageIndex = 0;
The problem is in the line:
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
When it's getting to the line with the quotation marks it's never equal.
Now there are more quotation marks.
In general the problem when comparing both text if it's having quotation marks it's not the same.
So i have two options:
1. To fix it somehow so the quotation marks will be the same in both variables when comparing and also the same like in the original as they show in the html page.
2. To remove the quotation marks from both variables.
What should i do ? And how ? I was prefer to use the original quotation marks like in the original since they have a meaning in the place they should be. The question is how can i do it ?
This is example of the block from the html file where the text with the quotation marks is:
<TD ALIGN="RIGHT" VALIGN="TOP"> <font size=-1 color=#ff9933><b>9418</b></font> </TD></TR><TR BGCOLOR="#eeeeee">
<TD ALIGN="RIGHT" VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','<u><span style=color:#000099;>כתב: Spook בתאריך: 08.03.15 שעה: 22:11</span></u><br>מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();" onmouseout="deActivate()" href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/new_locked_icon_general.gif" border="0"></a></TD><TD ALIGN="right" VALIGN="TOP" WIDTH="55%">
<FONT CLASS='text15bn'><FONT FACE="Arial">
<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=189696&forum=scoops1"><b>
<font color="898A8E">תווית על בגד: ''תן לאישה לכבס. זה תפקידה''</b>
</a></font></TD>Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','<u><span style=color:#000099;>כתב: Spook בתאריך: 08.03.15 שעה: 22:11</span></u><br>מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com) -
After loading on a link to KnightNews, all of the header stuff disappeared - Firefox box, minimize button, delete button, and the only way to get out of the KnightNews was control-alt-delete. I now find that any time i use Firefox, I have the same problem. I have deleted the program, reinstalled it, done a system restore, all to no avail. When I click on Firefox to open it, the full window appears briefly, then the whole screen is filled with the opening Firefox page. Clicking on a program in the history box brings it up, but it's the same scenario - control-alt-delete is the only way to get out. I also was not able to open the Troubleshooting Information which was listed below on this page.
'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
Or it might be caused by Hardware Acceleration.
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''
Maybe you are looking for
-
How to create a variant in VA05?
Hi, How can we create a variant in VA05 to make it available in the display variant list?do we need any authorization? Thanks, Rakesh.
-
Is it possible to connect a dot matrix printer to MacBook Air? I need to print receipts in my textile showroom. Please suggest good applications for printing receipts and saving daily sales records.
-
Why does it lag so much when I scroll in Safari? (OS X Lion)
I've noticed that ever since the OS X Lion update, webpages in general are pretty laggy when scrolling. I let the page completely load and when I scrollthere is stuttering and lag. It is made most apparent when I use momentum to scroll a long webpa
-
Activating webservices in GRC 10
Hi All , Can anyone guide me how to enable the webservices in GRC 10 for integration with IDM components. I am googling about this but couldn't able to find any help. We used webservices through WSDL in GRC 5.3 , but i am unable to find a way for GRC
-
Hello experts, I'm getting an error in this program! form delete_old_snap_records. data: reorg_date type d. data: begin of delt occurs 20. include structure snap_beg. data: end of delt. reorg_date = sy-datum - 28. select distinc