Can you go back to second page of your menu without going to the main page.

I have created main page (first play) and second page for the chapters.
On the second page, after selecting any chapters, I want to go back to select another chapter from
the second page, But the dvd takes me back to the main page instead of second page. Can this be
corrected.
Thanks

Hi - welcome to the discussions.
Yes, it can be corrected - what you've done is set the menu call and/or end jump to go to the main menu. This is completely normal, but sometimes you don't want this to happen.
If you are playing a single chapter at a time and want to get back to the chapter menu afterwards then the best thing to do is to create a story and put the single chapter inside that. Point your menu buttons to the story container (not the chapter) and it will play. Stories are a little like tracks in that they can have end jumps and menu calls of their own. Simply click on the story, then use the commands in the property inspector to set up the place to go at the end of playback or if the user presses the menu button.
You would then repeat this for every chapter that you want this to happen for.
The whole track itself then acts as a 'play all' if you need it to - the stories do not interfere with this. You can set a different end jump and menu call for the track. An alternative would be to create a final story and put ALL of your chapters into it, and point your 'Play All' menu button to this story.
Stories can also be thought of as playlists (like in iTunes) where you set up the chapters you want to play back in the order that you want them. I would avoid making these too complex, however as it has a knock on effect on the way the DVD player has to work to make a smooth playback.
The other way to achieve what you want is to use some scripting, but there is no need to do this as it sounds as if stories will do all that you need.

Similar Messages

  • When a TC is full can you piggy back a second one? If so how?

    When a TC is full can you piggy back a second one? If so how?

    No you cannot piggy back. You can offload the existing sparse bundles and start again. The easiest way is just to archive the existing TC hard disk to equivalent size USB directly from airport utility. Then erase the drive and start afresh.
    But there is no way for the TM to spill over and start using another disk as if there was just one TC. And buying another TC would be a real waste unless your current one is old and too small. Just use USB hard disk plugged into the TC.

  • How do you find your ipod without going to the police and with no icloud??

    plz help

    You don't. You can NOT track it unless Find my iPod in iCloud was enabled.
    What reason do you have for not going to the police? Filing a police report is the only thing you can do at this point.
    It is unlikely you will see it again. Sorry for your loss.

  • How can you enable back the Android native Menu button in AIR 2.7?

    I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
    BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
    So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

    There is a work around and a reason for the menu issue.  Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels.  If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework.  See below link for more info and work around. 
    http://forums.adobe.com/message/3964792#3964792

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • How can you get back to the registration screen to change information once registration is complete

    how can you get back to the registration screen to change information once registration is complete?

    You don't have to. Just go to Apple's Express Lane and add products.

  • Can you rename backed up files on time capsule?

    Can you rename backed up file on time capsule?

    You can rename the sparsebundle file that Time Machine has used for the backups of a Mac on a Time Capsule.....if that is what you are asking......just like you can rename any file on a Mac.

  • In an interactive report, after going to 5th list, can you come back to 2nd

    Hi guys,
           I am having a simple doubt, can you clarify me.
    In an interactive report, after going to 5th list, can you come back to 2nd list? how?

    HI,
    Write this under at line selection.
    Atline-selection
    case sy-lsind .
    when 1 .
    when 2 .
    when 3 .
    when 4  .
    when 5.
    sy-lsind  = 2 .
    when  12 .
    when  13.
    endcase .
    Thanks
    Mahesh

  • Can you convert MS word to pages?

    Can you convert MS word to pages?

    I see you just list an iPad, but you've posted in the Pages for Mac forum, so I'm going to assume you are asking about Pages on a Mac. Pages can open most Word documents (probably Word 97 or later). The conversion most likely won't be perfect, so be prepared for some differences.

  • Can you print document save in pages under iCloud

    Can you print documents save in pages under iCloud

    The easiest solution may be to Duplicate the file in iCloud by highlighting it / Right Click / Duplicate
    Drag the Duplicate to the Desktop and Print

  • Can you change back to a different plan

    If you change to a new plan and decide you do not like it, are you locked in for a specific period of time or can you switch back at any time?
    Thanks,
    Rob

    You can change your rate plan to whatever you would like at any time. Keep in mind that if you are going to a lower plan it can either be started on the day you request the change (you will get pro rating on your minutes that may cause you to get minute overage) or the best time to start the new plan is the beginning of your next billing cycle. If you are increasing your minutes, you can backdate the change to the beginning of your bill cycle, start the change the same day you requested your plan change or future date to the beginning of the next bill cycle.

  • Can you make address labels in Pages?

    Can you make address labels in Pages?

    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=labels &mforum=iworktipsntrick
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
    Peter

  • I cannot figure out how to view the history of pages so I can easily go back to a page I may have been in 10 clicks ago.

    In the latest version, I cannot figure out how to view the history of pages so I can easily go back to a page I may have been in 10 clicks ago. I don't want to have to hit the back button 10 times, I want to be able to view a list of the past clicks and pick where I want to go back to. How do I do that now?

    Click-hold the unified Back / Forward button, or right-click it to get the Back / Forward history for that tab.
    Or install this extension to get the old "drop-marker" button restored. <br />
    https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

  • Can you go back to lion if you have already gone to Mountain Lion? I wish I had the old OS back.

    Can you go back to lion if you have already gone to Mountain Lion? I wish I had the old OS back.

    Try this:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Can you add a watermark to pages and if so how?

    Can you add a watermark to pages and if so how?

    Hi Grant,
    See Page 63 of the  Pages'09 User Guide. (Download from the Pages Help Menu)
    Using  Master  Objects  (Repeated  Background  Images)
    You may want to add watermarks, logos, or other background images that appear in the same spot on every page of your word processing documents. These repeated graphics are called master  objects.
    Regards,
    Ian.

Maybe you are looking for

  • Safari 4 not rendering GMail correctly

    Hi.. I have a problem with Safari 4 (MacOS 10.4.11) accessing Gmail (user interface 1: ui=1). The LAST message in any thread is padded with pages and pages and pages of blanks - actually a greyed-out area - between the end of the message and the "Bac

  • Issue with 'InputText' : Always displays as 'OutputText' in ADF

    Hi, I am having a view for the search functionality. The view has three entity objects in it. This is done exactly like the 'WebStyle searchForm' which is given as a screen cast. Once the results are displayed through search, I do provide a 'Commandl

  • Change Context member using macro

    EPM 10 - SP15  NW  Excel Add-in I want to provide a button for user in a report to change the context member selection. Very similar to what Application.Run "MNU_eTOOLS_MEMBERSELECTOR_E" does in 7.5 I didn't find any macro to assign to button which t

  • Cannot start SAPehpi

    Hello, I am trying to start EHPI using the following command: F:\SAPehpi700\EHPI>STARTUP.BAT "jce_policy_zip=F:\SAPehpi700\EHPI\jce_policy-1_5_0.zip" It does the following in the same cmd window: F:\SAPehpi700\EHPI>STARTUP.BAT "jce_policy_zip=F:\SAPe

  • CS6 Mask panel problem revisited with screen capture

    Figured a screen shot would help. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says