Can you help me re: data usage?
Can anyone tell me why I cannot get data usage at this time? I have removed sim card and put it back but to no avail. Where can I fine data usage online?
That is definitely strange, twitterbird. Are you referring to data usage through your My Verizon App? Does it just not update, or does it state that the info is not available? Have you tried accessing this information directly through the website?
NicandroN_VZW
Follow us on twitter @VZWSupport
Similar Messages
-
How can you find out your data usage on Blackberry 8520?
I recently got a Blackberry Curve 8520 from O2 and just found out I'm limited to 500MB web usage per month. I just wondered if there was somewhere in the phone that keeps track of that?
ThanksHiya!
Here is the best site I have personally found to calculate data, www.att.com/datacalculator
it seems to be fairly accurate.
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on -
I
This is a customer to customer forum. And even if a rep did show up to respond to you they would have no way of knowing who you are in order to "refresh" your data. Whatever that is suppose to mean.
-
Can you help me on something? I restored my iPod and everything I had was gone. (What I Wanted) But then when I looked at my Usage It said I only have 22.5 GB Available and I Used 6.0 But I didn't. I also looked at my Backup storage and it still had all of my backup from before I restored. I deleted all my backup because it said I used all of my Backup Available. And now when I try and backup it says there is no more room or whatever to backup and Its 5/5.
You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I have an iMac, operating system 10.7.4 with up to date software. My mail application is rejecting my password even though I know I am putting it in correctly. I have an ipad and iphone and the mail application is working fine on them. On my desktop however I cannot receive or send mail. I think it must be something to do with the settings but cannot work out what. I have contacted BT who provides my email and internet. As I have another email address with them that is working correctly they believe it is a problem with mail rather than with them. Please can you help?
OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
I tried restoring my iMac 27" slim. I followed the steps erased my data then to reinstall osx mavericks. Now that I'm trying to reinstall osx mavericks for whatever reason it doesn't completes. Can you help me out?
That's not quite the proper way as far as I can tell. Usually, one boots directly into the Recovery HD using COMMAND and R keys at startup. If you cannot do that then most likely there is a problem with the hard drive. Since this is a new computer i would make a Genius Appointment and take it in for service.
-
I am trying to send all of m photos to my iphone from my old phone (Nokia N97 mini). I have paired the devices, the iphone says it is connedted but when i try to transfer the data from the Nokia, i get a message saying could not connect.
Please can you help??
ThanksFile transfer by bluetooth is not supported on the iPhone. There are a few apps in the app store that permit the transferring of photos by bluetooth, but this is only iPhone to iPhone. Fact is, you can't do what you're trying to do, so you can quit trying.
-
I just updated my iphone4 to iOS5.1 and now I cant use my 3g, everything on my cellular data's right but I cant activate my 3g anymore, can you help me please? thank you! i really need it
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data doing a reset.
If this does not work, set it up again as new device, without using the latest backup afterwards.
How to back up your data and set up as a new device -
Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state. -
I'm trying to make a purchase at itunes, but when I finish asking the card data to the message comes into contact support itunes appears, can you help me?
Do exactly what it told you to do.
Contact itunes support -
ipad is disabled, connect to itunes. know the passcode but ipad is not synced so i lose data if restore it. can you help me to save the data. thanks
You're going to have to get that info about his iTunes account if it's on iOS 7. Does it at least show the username it needs?
-
My i phone is not activating after i up date my i phone 3gs can you help me
my i phone is not activating after i up date my i phone 3gs can you help me
See your Other post on this Topic...
https://discussions.apple.com/message/23620536#23620536 -
My little children Majd entered the wrong passcode for more than 10 times, my iPhone automatically got reset all data was deleted. I managed to retrieve the contacts only but I'm unable to retrieve my SMS's and my photos???? Can you help me please ???
Hi,
Did you ever back up your phone on the computer?
Did you use photo stream at all?
May I suggest changing your passcode lock to a letters and numbers lock (if not all ready it will make your iphone more secure and a restore lock otion shouldent be needed). Then change your setting as well preventing restore after ten incorect passwords.
kc -
Can you help me interpret the following lines in UPDATE rule?
Hi,
Can you help me interpret the following lines in UPDATE rule?
1. What is the role of role of u201CCHANGING RESULT.u201D and u201CCHANGING lc_local_value.u201D?
2. What is the role of the CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY', in particular the Exporting and Importing parts?
3. Can I say that u201CCOMM_STRUCTURE-ORDER_VALu201D in the subroutine is passed to u201Clc_document_valueu201D in the u201CFORM loc_curr_convertu201D; and further passed to u201Cforeign_amountu201D in the u201CCALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'u201D?
4. Finally, what becomes of my original u201CActual Goods receipt quantityu201D( 0GR_QTY ) which I am writing the routine for? I donu2019t see any where in the code that it is being referred to? Do any of these codes affect the value of 0GR_QTY?
5. Also, if there are 3 different subroutines in the INCLUDE and I am making the change described in #4 above, how do I know which of the 3 subroutines to call?
===============================
===============================
So I am reviewing a transfer routine in for u201CActual Goods receipt quantityu201D and routine an INCLUDE statement: INCLUDE RS_BCT_MM_UPDATE_RULES.
The update rule also includes the following properties to run the following subroutine in the Include:
IF u2026..
perFORM LOC_CURR_CONVERT
USING COMM_STRUCTURE-ORDER_VAL
COMM_STRUCTURE-DOC_DATE
COMM_STRUCTURE-ORDER_CURR
COMM_STRUCTURE-LOC_CURRCY
COMM_STRUCTURE-EXCHG_RATE
CHANGING RESULT.
I verified in the INCLUDE (RS_BCT_MM_UPDATE_RULES) and the subroutine is as follows:
FORM loc_curr_convert
USING lc_document_value
lc_date
lc_document_currency
value(lc_local_currency)
lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
AND NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL ) .
lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
date = lc_date
foreign_amount = lc_document_value
foreign_currency = lc_document_currency
local_currency = lc_local_currency
rate = lc_rate_dec
IMPORTING
EXCHANGE_RATE =
local_amount = lc_local_value
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5.
IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
sy-subrc.
ENDIF.
ELSE.
if conversion not possible -> assign target values
lc_local_value = lc_document_value.
lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.HI,
Thanks so much the explanations.
I just verified again on our dev system and the update rule for 0GR_QTY (Actual goods receipt quantity) include the following:
perFORM QUANTITY_CONVERT
USING COMM_STRUCTURE-CPQUAOU
COMM_STRUCTURE-po_UNIT
COMM_STRUCTURE-base_uom
COMM_STRUCTURE-numerator
COMM_STRUCTURE-denomintr
CHANGING RESULT
Now, in the include, I also found:
FORM QUANTITY_CONVERT
USING QC_SOURCE_VALUE
QC_SOURCE_UNIT
VALUE(QC_TARGET_UNIT)
QC_UMREZ
QC_UMREN
CHANGING QC_TARGET_VALUE.
i. Does it mean it actually does quantity conversion?
ii. If you have access to the INCLUDE I will appreciate some hints on what the subroutine QUANTITY_CONVERT is doing. It does not appear do to be saying anything about quantity conversion; but it is supposed to be doing something with the parameters being passed from the update routine.
iii. In your response to #5, after all the computation in the INCLUDE, what comes back to the Update rule i.e. what comes back to become the value of 0GR_QTY?
Is it the u201CRESULT.u201D in the update rule or u201CQC_TARGET_VALUE.u201D in the subroutine in the INCLUDE.
iv. So, am to create an Update rule for 0PSTNG_DATE and the source is BUDAT; and I need to write a routine using the include INCLUDE RS_BCT_MM_UPDATE_RULES.
I looked through the INCLUDE and identified all the subroutines in this INCLUDE as follows:
QUANTITY_CONVERT
LOC_CURR_CONVERT
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Does it mean that to use this subroutine, I can only use the USING parameters of one of these listed subroutines?
--Also, does it mean that because 0PSTNG_DATE is a date, I can only use one of
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Or, are there other includes to be used for 0PSTNG_DATE
Thanks -
Can you help me? I meet errors when I do incomplete recovery with RMAN
In recover step, There are following errors:
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
question:
1. Should I restore archive log files generated on July 16th back to orignal archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
The following is the detail information:
The database is ok when I try to do incomplete recovery database that was fully backed up on July,16th,2004. The database is oracle 8.1.7 and is in the archive mode:
The following is the backup script:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=db01,OB2BARLIST=ora8i_online)';
backup incremental level 0 filesperset 1
format 'ora8i_online<db01_%s:%t:%p>.dbf'
database
include current controlfile
archivelog all delete input;
I use it to do a full backup on July 16th,17th successfully.
And I use the following scripts to do incomplete recovery:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=ORACLE8,OB2APPNAME=db01)';
sql "alter database mount";
set until time ='17.07.2004';
restore database;
recover database;
sql "alter database open resetlogs";
sql "alter database open";
There script is successful in restore step. But there are some errors in recover step. The detail information is showing in following log:
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: dev_0
RMAN-08500: channel dev_0: sid=13 devtype=SBT_TAPE
RMAN-08526: channel dev_0: HP OpenView OmniBack II A.04.10/176
RMAN-03022: compiling command: sql
RMAN-06162: sql statement: alter database mount
RMAN-03023: executing command: sql
RMAN-03022: compiling command: set
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2056 set_stamp=531622798 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08016: channel dev_0: starting datafile backupset restore
RMAN-08502: set_count=2180 set_stamp=531623409 creation_time=16.07.2004
RMAN-08089: channel dev_0: specifying datafile(s) to restore from backup set
RMAN-08523: restoring datafile 00001 to /d/db/oradata/db01/system01.dbf
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2180:531623409:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-08023: channel dev_0: restored backup piece 1
RMAN-08511: piece handle=netace_ora8i_online<db01_2212:531623994:1>.dbf tag=null params=NULL
RMAN-08024: channel dev_0: restore complete
RMAN-03022: compiling command: recover
RMAN-03022: compiling command: recover(1)
RMAN-03022: compiling command: recover(2)
RMAN-03022: compiling command: recover(3)
RMAN-03023: executing command: recover(3)
RMAN-08054: starting media recovery
RMAN-03022: compiling command: recover(4)
RMAN-03026: error recovery releasing channel resources
RMAN-11001: Oracle Error: ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/d/db/oradata/db01/system01.dbf'
RMAN-08031: released channel: dev_1
RMAN-08031: released channel: dev_2
RMAN-08031: released channel: dev_0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover
RMAN-03002: failure during compilation of command
RMAN-03013: command type: recover(4)
RMAN-06003: ORACLE error from target database: ORA-01220: file based sort illegal before database is open
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 7220
ORA-06512: at "SYS.X$DBMS_RCVMAN", line 5053
ORA-06512: at line 1
I repeat my questions:
1. Should I restore archive log files generated on July 16th back to original archive directory in order to avoid to recover failure?
2. Or Should I add the command "sql 'alter system archive log current'" in the backup script in order to avoid to recover failure?
Can you help me ? Thank you.which o.s u are using i can't help you as i never worked on ver 8i,i can tell you incomplete recovery on oracle 9i on win 2000 server.
thanks : alok kumar
Maybe you are looking for
-
I feel that Google is abandoning Mac OS because Apple abandoned Mac. Why Can I not get Google chrome?
-
Help! Pls! Product Code Countries
Hi Everyone, I asked once but I couldn't get any help, perhaps my phrasing was unclear and too complicated. The N86 (RM-484), Product Code: 0580867 (Europe Mea seap), corresponds to which country?Are English, French and Italian natively preinstalled
-
Help with Itunes and Windows ME please
I have a Nano and use it with Windows XP with no problems. We purchased a 3rd generation Nano for my parents and their computer is several years old and uses Windows ME but the Itunes site says it is only for XP and Vista. What alternatives do I have
-
Outlook 2013 - How do I utilize both Signatures and Stationery? Help!
This is a bit of a weird one to describe as I've never really used stationery in Outlook so here goes. Employees utilize BOTH the signature and stationery. A standard block of (formatted) text is used in the signature and the stationery calls on an i
-
Performance Appraisal - Workflow customization
Hello Is it possible to customize the text on the workflow email that is sent to the appraiser or appraisee during various stages of the process. Specifically, the client would like to have the functionality wherein the 2nd level manager is able to e