Can you help resolve a "Go Wireless" and Verizon Wireless issue?
How do you file a complaint against "Go Wireless" and Verizon wireless? It was partially my mistake because I didn't realize that Go Wireless charges a premium for their service. That said, I was informed by the sales person that I could get the $150 bill credit per phone line I ported over, and a $200 visa card for each smart phone I turned in. That's $350 for each phone in credits.. This seemed like a great deal, so I purchased 3 phones, samsung galaxy 5. I paid a $50 premium per phone to buy them from the store (note..there are NO PRICES listed, you have to rely on what the sales persons quotes you). I also paid a $20 per phone "set up" fee and a $10 sim card fee. Again, I take responsibility for not asking if other verizon stores charged these additional fees. HOWEVER, when I was told to go to the corporate verizon store to get the envelopes for to turn in the smart phones for the $200 per phone credit - this was not my lack of research. I did go to the corporate office and was told that the $200 offer had ended 7 days ago. I went back to "Go Wireless" and the store manager told me that the employee was misinformed and was working off a quote sheet that was out dated. Ok, now you'd think they'd offer something to fix their "mis-informed" employees mistake. No, they said there was nothing they could do. I could return each phone for an additional stocking fee of $35, and cancel my plan. So, here I am...paid a premium for the phones, was "misinformed" by a store agent who was working off an outdated specials sheet, and my only recourse is to pay $105 to return the 3 phones. Something isn't right here. Verizon won't do anything, Go Wireless won't do anything. Any suggestions?
My girlfriend had a similar issue because her new device was not updated to IOS7 when she turned it on, but her backup point was created using IOS7. Check to be sure the restore point was created and then factory reset the phone after you have updated to 7.
Similar Messages
-
My iPhone5 was replaced today and when I did a restore I was only able to access a previous backup to the backup that I did yesterday? Hence, I do not have access to some apps such as ebooks and games. Can you help resolve this issue?
My girlfriend had a similar issue because her new device was not updated to IOS7 when she turned it on, but her backup point was created using IOS7. Check to be sure the restore point was created and then factory reset the phone after you have updated to 7.
-
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.
Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
hi,
my name is Xue Wenzong, the EFB manager from Xiamen Airlines from China. we find that APPLE reliese released approval for their consumer product chargers to be plugged into a 115 VAC 400 hertz receptacle, you can see this link"https://support.apple.com/en-us/HT202916", my question is what is the type A adapter? can you help to send some picture and information about it?
thanks!
<Email Edited by Host>See here: http://www.iec.ch/worldplugs/typeA.htm
-
Oil Paint Filter not working - CS6 - Can you help resolve this?
Can you help? The CS6 oil paint filter is not working. The error is: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I have the latest graphics driver software. I have the latest update for CS6. I have followed various community support recommendations to no avail.
In the Advanced Graphics Processor settings (preference, performance) only "Basic" is available and I can't select (grayed out) "Use Graphics Processor to Accelerate computation" and can't select "use OpenCL".
My System: Windows 7 (64 bit), HP Pavilion dv6-3250us Notebook with Intel(R) High-Definition Graphics Driver.
Here is system information (from CS6):
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 3894 MB
Free memory: 897 MB
Memory available to Photoshop: 3318 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2189
Driver Date: 20100728000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1723 MB
Video Rect Texture Size: 4096
Serial number: 95478109889423625236
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Chris\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 669.3G, 316.9G free
D:\, 29.1G, 3.72G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.3
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEYou haven't installed the Photoshop updates -- you should be on 13.0.3 or 13.1.1, not 13.0.0.
Oil Paint uses the GPU, and requires a decent GPU.
Your GPU doesn't support many of the features needed by the Oil Paint filter, and barely supports any of the GPU features in Photoshop (notice that it does not support OpenCL, or Normal or Advance mode for GPU drawing). -
Can you help me with the WHERE clause? Any issue with this code block?
Hi,
I am looking for blogs or any document on how to implement a Lookup during data loads in BW.
The problem is that all those that I find on this site are mostly about u201CLookup in XIu201D
I have read bits and hints on different postings on this site and this is the best I could do for the scenario shown below:
I need to add the Chars: Char1, Char2, Char3 to CubeX
so that I can display the data for these 3 Chars in a report.
Char1 and Char2 are filled in ODS12 and Char3 is filled in Cube3.
Can you help me write a routine so that while loading data to CubeX, it will read Char1, Char2, Char3 from ODS12 and Cube3; and make them available in CubeX?
This is my attempt so far: continue:
u201C----
select /bic/Char1 from /bic/ODS12
select /bic/Char2 from /bic/ODS12
select /bic/Char3 from /bic/Cube3
into result
WHERE u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
and objvers = 'A' .
end select.
u201C----
1. What should be my WHERE clause?
2. In the select statement, by studying samples on this where should there be an u201CMu201D in front of the ODS? e.g. select /bic/Char1 from /bic/MODS12
If so, what is the significance and the other options?
3. Should this code be in the Start routing of CubeX? Or any other possible location? Also, in the start routine does it matter where within the start routine this code needs to be placed?
4. Can you please fix this code and add any lines I may be missing?
Is what I am looking to do refer to as u201Cdoing a lookupu201D?
Thanksok
-
I have issues with Flash Player 10, can you help resolve this?
Hello everyone,
At the risk of giving too much information:
I run a Mac iMac 2.16 GHz Intel Core 2 Duo with 2.5 GB 667 MHz DDR2 5 DRAM with OS X version 10.4.11
The issue:
I recently did the following things,
a) Downloaded and used Safari Version 4 Public Beta (4528.17) Without any issues.
b) Downloaded and used Flash Player 10.
Prior to this I wasn't aware of any issues, so I shall assume that Safari and Flash Player 9 worked fine together.
I also run Opera version 10.00 Beta, Firefox version 3.0.1.0
Here's the issue, when I visit BBC iPlayer and select a TV or Radio progamme I get this warning ..."A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run. your computer may become unresponsive. Do you want to abort the script?" YES/NO ( attached file).
Selecting Yes or No results in the TV or Radio Progamme continuing to play but all control is lost so a Force quit is neccessary.
This issue applies to Firefox and Opera.
Sky.com doesn't appear to suffer these issues in as much when I've uninstalled Flash Player, Sky asks for 10 to be installed and works fine once it's done. I should add that I installed Adobe AIR after the issues began without any resolution.
No doubt when you know what the issue is it's resolved in a flash, so come on who out there can help me...please.Hello Chris,
Thanks for the Flash settings instructions, that was useful and now I understand that all those particular options are available from a right click. Having said that in this case I still wasn't able to resolve my issue, although I can right click and by clicking anywhere in the Adobe Flash Player Settings panel select or deselect there doesn't appear to be anyway to save that selection,(attached).
I should say at this point that I'm thinking that if my issue might be display speed then by disabling hardware acceleration this might resolve the issue.
Regards
Chris Antjoule -
Can you help me with Page Layout and/or Design ideas for a software manual?
Greetings,
I am a new InDesign user, and am converting a software manual that I created in MS Word into InDesign. It will be converted to a pdf to view online. I have the basics (3 master pages, page numbers, running headers, 2column pages with text boxes on the left and screenshots on the right), but I want to make it look prettier. Could you please give me some ideas on page layout and/or design to make it look better or more creative?
A few things that I am considering: borders around screenshots, a watermark, a logo next to the page numbers, different size/type of fonts, etc.
I am open to any suggestions to make this look better. However, please understand that I am new to InDesign. With that being said, please tell me a few steps when you mention your tips. Thank you!Take a look at a few websites on Cannons of Page Construction.
I think the best idea for you is to look at a few software manuals and take tips from how they accomplished the layouts.
I'm not saying to copy them - but rather see what works and doesn't work, what worked for them might not necessarily work for you - research some layouts.
Fonts/type/sizes etc. are pretty much ambigious without context - is this a software manual for kids (soft cuddly big fonts easy to read), technical (small, tight spacing etc), Adult friendly (smooth, crisp clear, well spaced), elderly (large elegant fonts).
It all really depends on your demographic audience.
Being new to InDesign I suggest you take up Sandy Cohens Quickstart Visual Guide.
I think you should look at Michael Murphys Book on Styles
And you should definitely get your printer (the guys bulk printing) the booklet for you on board from the start to work out optimal sizes to suit their printing presses and workflow etc. And to ensure that you are setup correctly in page sizes, margins, safe type areas, colour profiles and a few other things that your printers prepress can help you with. -
How can you help Apple ID get done and start working write way.
Hi Apple Support Communities,
This is excellent helping me. I am very happy because I really want enjoy with my iPhone 5. Apple ID and my own email is same I am using the am I write or worng explain for me. If I wrong how sall I do the write way to do send my email.
Kind regards
Margaret Thompson
<Email Edited by Host>The link in your post is not leading anywhere. You are in good hands there with @CherylG and @erico and @lasvegaswireman.
I will just echo that you did not get recovery disks with your PC....no PC maker provides them in the box any more. When the laptop is new you are prompted to make recovery disks but most people do not do that. You can download a disk image of your licensed Windows 7 version from which you can burn a DVD and then fill in the drivers as mentioned on your other post. Let me know if you need a link for the download. But frankly it is worth getting the recovery disks from HP. I would not buy them from eBay and I buy lots of stuff from eBay....too much chance you will get the wrong ones. -
Can you help ? Hp Officejet 6600 and 10.8.1
The CD is not working with 10.8.1 for my new Hp Officejet 6600.
Any ideas ?
MerciHello Malouk73,
Thanks for the post. I've included a link below with some steps to walk through to get this resolved. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03384431&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=4083871#N80
I work for HP but my posts and replies are my own....Thank you! -
My first IPAD; can you help me find a cover and keyboard?
Thanks in advance for reading this:
Im buying a IPAD 3 tomorrow and I think I am going to need some sort of protective case for it. That said, id like for this case/cover to work seemlessly with the Logitech Ultrathin keyboard (whcih I have read very good things about). I hear that certain covers will not work with the ultrathin.
What case/cover would you suggest and, would you recommend the Logitech keyboard?
Any other combinations of accessories and/or advice/tips is greatly appreciated!Never tried it. Personally I do love the smart cover. It's my 3rd cover I have tried and I like it the best. I use just an apple wireless keyboard. I like apples keyboards, but any Bluetooth will do.
-
HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?
my macbook pro is frozen and does not move from loading screen. Can you help?
Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
We can't help you with that problem.
Good Luck -
I have upgraded iphone from 4 to 5s inserted the sim followed the screen instructions BUT I have no service can you help?
The iPhone 4 and iPhone 5s use different sized sims. So you can't simply have inserted the 4's sim into the 5s.
If you got a new sim, was that sim activated without your carrier?
You need to contact your carrier if you wish to have your service on the 4 transferred to a sim that the 5s can use. -
I accidently deleted my iCloud Account & lost all Calendar and Contacts List data. Can you help me retrieve my account and data?
Welcome to the Apple Community.
Just log back into your account.
Maybe you are looking for
-
Is there a way to hide and show the whole 3D viewer with javascript?
I'm trying to set up a pdf so that the person who's reading it can use a button to switch between a picture of the product and a 3D model of the same. The idea is that the two ways of illustrating the product can be in the same space, so that there's
-
Every delivery nos having same sales order should create single invoice.
Hello All, My Business requirement is : For particular Order type if the deliveries belong to the same sales orders, then Routine allow creating Single invoice else it should spilt the invoice according the deliveries belonging to different sales ord
-
Problems Were Found With The Partition Map
I keep getting that error when I verify my disk after I boot up Lion and verify the 320.07 GB Hitachi Option. When I follow the instructions to repair the disk the problem doesn't seem to pop up but when I double chek it's still there. When I hit the
-
Can't add to calendar and lost all previous info on Calendar
I am having problems coming to terms with IOS7 , in fact hate it. I have lost all my details in my calendar which I relied on. I cannot add anything to it. What am I dong wrong please?
-
How to modify user attributes in Microsoft IAS or Active Directory??
Anyone have an idea?? What I'm trying to do is to authenticate management access to an ACE 4710 against a Microsoft IAS server. According to the document below: http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances