Can you help us improve our SAProuter configuration process?
Have you recently discussed installing SAProuter in order to enable remote connectivity to your SAP BusinessObjects systems with an SAP Support Consultant?
Perhaps you have watch a video or read some of the material at http://service.sap.com/remote-supportability ?
If so we would like to hear from you! Please have a look at my recent blog post for more details: Interested in SAProuter? Please let us know.
Thanks!
Alexey Lukin wrote:
That's a good attempt, Steve! You can do even better if you complement Denoiser with Decrackler to reduce that residual buzz, esp. at higher frequencies.
Alexey, I only spent a few minutes on it! The NR really didn't take too long to set up, and I didn't investigate it any further - this was merely an attempt to find out how possible it would be at all, rather than perfection. .
The link you gave appears to have an extra http:// on the end of it which has to be removed before the file will download. Now I've listened to it, I think that a combination of both approaches is the real answer to cleaning it up - that way you get just about zero crackle and less pumping artefacts on the voice. I still think you need the advanced version to get rid of the pumping though, although I agree that you don't for the rest of it.
And for everybody else who's wondering where Alexey has suddenly popped up from - well, basically iZotope, but he also created the RightMark analyser and ExtraBit, and deserves much kudos for everything he's touched! He does a lot of iZotope's DSP and yes, there's some of his stuff in Audition (the radius time and pitch algorithm is his, and obviously there's more in the rest of the iZotope-based plugins).
Similar Messages
-
This happens straight after I have closed Firefox browser and then straight away, I want to open it again. Otherwise it will give this message and I will have to wait until it supposedly closes whatever is supposed to be running so that it can open -annoying!
The process is "firefox.exe" you will only see it in the "Processes" tab of the Windows Task Manager, since you don't see it on the Windows Task Bar. You will have to terminate it from
there, since it was not actually closed.
See: closing Firefox properly: https://support.mozilla.com/questions/866027 -
We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?
You can't tell which device a purhcase was made on, but if your family members each have their own iTunes account to which your card is linked then you can check the purchase history on each of those accounts via the Store > View Account menu option on your computer's iTunes - that should have 'purchase history' section with a 'see all' link to the right of it
-
the devices is not popping up in our itunes. is anyone else having this problem. can you help me if you have the same problem
Try rebooting the computer and restarting the device.
Try a different cable.
In rare cases fluff in the connector port can prevent proper contact with the connectors used to transfer data. An air duster or thin piece of card or plastic can be used to tease out debris if that is the problem.
tt2 -
Can you help with Problems that one of our users i having with regiistration of Premiere Pro?
Can you help with Problems that one of our users i having with registration of Premiere Pro?
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840 -
Help! We've lost all our families 'Faces' in Aperture, can you help?
Can You help us please?
I've just upgraded OSX to 10.8.2 & noticed Aperture playing up-so I upgraded Aperture to 3.4 hoping it would start playling nice again, but now I've lost all my family pics tagged in 'Faces' It's taken me over a year to organise quiet a few thousand of all our famlily pics, can anyone help please? Any light shed on the subject would be much apppreiciated.
Thank you kindly,
Wayne & Family. :-) XXXdo you know of a way I can reduce it's size?
Wayne, when you relocate (all or some of) the originals to an external volume, the library on your MBA will shrink considerably. But there is no way in Aperture to delete the originals completely.
I am nor sure, how familiar you are with the organisation of the Aperture library. Other than in previous versions of iPhoto, Aperture never actually renders an edited image. It just writes textual comments on how to render the edited versions, if you want to export your image. In the library are just your originals and instructions on how to produce an edited version, if the image is needed. This makes it easy to undo edits and to create several edited versions of the same image, without using much additional space. So if you remove the originals, your images are lost. The referenced library is a neat way to get the originals from your system volume, until they are needed.
Other options:
Don't import raw+jpeg pair, if you are shooting raw, raw should suffice.
Rigorously weed out your library and delete duplicate or redundant images
Render only small preview images, or none at all, but then you cannot share your images with the Media Browser, and some operations will be slower.
Léonie -
When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards. -
my configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me
Si vous tappez sûr le cle <<option>> et cliquez vôtre souris de l'icon de haut-parleur
de le haut partie de sa Desktop, vous pouvez voir les choix pour le son: les haut-parleurs internales, Line out et Digital Out. C'est tout ! Ou cliquez de la Pomme a gauche, choissisez Préferences, et Son, et voila..... le meme chose.....
Merci d'avoir choisi Apple
John B -
I cannot get .arw or jpeg files from my Sony A6000 to be taken into my Lightroom 4.4 via the normal "synchronise" process. I have updated my Pc to Adobe RAW/DNG 8.4 with no improvement. Can you help please?
With regards to your .arw files:
You need to either purchase and install Lightroom 5.4 -- OR -- download and install and use the FREE Adobe DNG Converter version 8.4, did you actually launch and use the DNG Converter?
There should be no problem importing JPG files into Lightroom from your camera, what happens when you try? Is there an error message? -
This iphone cannot be backed up because there is not enough iCloud storage. Can you help me take the pictures off the icloud since I backed them up on my pc and would like to continue to use the storage in icloud to back up with.
you are correct. We are not understanding each other. I am attempting to provide a model for good habits for the OP. You have provided only a short term brief intervention which leaves a gaping hole for data to get lost in.
At no point did I say that merely backing up the device without saving the camera roll pictures would delete them. Please stop inferring what you think I mean, you are confusing the issue. I said that doing so was SETTING UP the OP for data loss. This behavior encourages the OP to simply shut off their backup for their pictures. At no point did you instruct the OP to delete the old pictures from the device. The set up part is this... if they simply turn off the camera roll backup, and aren't implementing some form of management for the pictures on the device, then the pictures are only being actually saved, in a "permanent" manner when the OP backs up to itunes. That's all fine and good, but this also presumes that the OP will always do so on a regular basis, will never forget to do so even when there are a ton of new, very important pics to worry about.
My suggestion allows the OP to continue to use the automatic backup feature the way it was intended...automatically...for the information that has not yet been saved to the user's computer. The whole point here is that the OP can keep their pics AND still benefit from automatic backups without disabling the cameral roll from being backed up into the icloud.
Should this poster have walked into my fruit themed store, I would recommend that the OP do the following:
1. back up the pics to the computer (done)
2. REMOVE THE BACKED UP PICS FROM THE PHONE
3. Learn about and utilize PHOTOSTREAM (including its limitations like no videos, only 1000 pics and only for 30 days) to make backing up and saving the photos from the phone easy and simple
4. Explain how backup works and what it backs up
5. Reassure the OP that even if they haven't backed up to itunes lately or have not bothered to properly save their pictures using another device and PHOTOSTREAM, that their oversight won't be catastrophic in circumstances where failure to do either of these things and being met with tragedy, does not necessarily mean that the OP is SOL. The automatic backup is another line of defense against data loss and can save the OP's precious memories, TEMPORARILY, until they can be transferred to another device for "permanent" storage. Why disable a line of defense?
I see it all the time. Full icloud, camera roll turned off, device not backed up to itunes nor pics saved for weeks because they were too busy, didn't feel like it or were just plain lazy. Then, a wedding, birth, Halloween, Naughty time with the hubby, whatever it may be its an event with a LOT of pictures taken. Then, then next day or so, before the manual saves can happen, the device is damaged and needs to be replaced. There's no backup, nothing saved and the user loses ALL of the pics from the special event. IF they had properly managed their pics and only kept stuff on there that they really needed, deleted the rest after saving their pics elsewhere, and thus kept the backup size small enough to use, the backup would happen unattended overnight, and even though catastrophe still happens, all the pics from the big event are recovered on a new device using the iCloud backup.
Do you see the difference? I hope you do, and i hope so does the OP. I have a great deal of experience here, take advantage of it or not. Accept my help or be stubborn about it, Your choice. I am finished posting into this thread now. Take care and good luck with your data. -
Hi, I have changed my password on my mini ipad after a few drinks and have forgotton the password, can you help please?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
HT1212 my ipad is disabled, how can I fix it . can you help me please!!!1
can you help me about it
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi,
When I deployed my EAR file on Weblogic I got this error,
Thanks in advance.
Can you help me in this regard, the error description is:
C:\bea\user_projects\domains\mywsdomain\.\myserver
\.wlnotdelete\extract\myserver_wsone-0.1_hh\KK\was.
java.lang.UnsupportedClassVersionError: com/inet/jk/ws/common/MYStartupServlet (Un
supported major.minor version 49.0).
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(Lweblogic/se
rvlet/internal/RequestCallback;)V(ServletStubImpl.java:900)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(Ljava/l
ang/String;)V(WebAppServletContext.java:3430)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets()V(Web
AppServletContext.java:3375)
at weblogic.servlet.internal.WebAppServletContext.preloadResources()V(We
bAppServletContext.java:3356)
at weblogic.servlet.internal.WebAppServletContext.setStarted(Z)V(WebAppS
ervletContext.java:6208)
at weblogic.servlet.internal.WebAppModule.start()V(WebAppModule.java:864
at weblogic.j2ee.J2EEApplicationContainer.start([Lweblogic/j2ee/J2EEAppl
icationContainer$Component;)V(J2EEApplicationContainer.java:2134)
at weblogic.j2ee.J2EEApplicationContainer.activate([Lweblogic/management
/configuration/ComponentMBean;)V(J2EEApplicationContainer.java:2175)
at weblogic.j2ee.J2EEApplicationContainer.activate()V(J2EEApplicationCon
tainer.java:2122)
at weblogic.management.deploy.slave.SlaveDeployer$Application.setActivat
ion(Z)V(SlaveDeployer.java:3099)
at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForA
llApplications(ZZ)V(SlaveDeployer.java:1768)
at weblogic.management.deploy.slave.SlaveDeployer.resume()V(SlaveDeploye
r.java:351)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e()V(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume()V(SubsystemManager.java:136
at weblogic.t3.srvr.T3Srvr.resume()V(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run([Ljava/lang/String;)I(T3Srvr.java:360)
at weblogic.Server.main([Ljava/lang/String;)V(Server.java:32)
>Google for it.
-Jerry -
Can you help me interpret the following lines in UPDATE rule?
Hi,
Can you help me interpret the following lines in UPDATE rule?
1. What is the role of role of u201CCHANGING RESULT.u201D and u201CCHANGING lc_local_value.u201D?
2. What is the role of the CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY', in particular the Exporting and Importing parts?
3. Can I say that u201CCOMM_STRUCTURE-ORDER_VALu201D in the subroutine is passed to u201Clc_document_valueu201D in the u201CFORM loc_curr_convertu201D; and further passed to u201Cforeign_amountu201D in the u201CCALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'u201D?
4. Finally, what becomes of my original u201CActual Goods receipt quantityu201D( 0GR_QTY ) which I am writing the routine for? I donu2019t see any where in the code that it is being referred to? Do any of these codes affect the value of 0GR_QTY?
5. Also, if there are 3 different subroutines in the INCLUDE and I am making the change described in #4 above, how do I know which of the 3 subroutines to call?
===============================
===============================
So I am reviewing a transfer routine in for u201CActual Goods receipt quantityu201D and routine an INCLUDE statement: INCLUDE RS_BCT_MM_UPDATE_RULES.
The update rule also includes the following properties to run the following subroutine in the Include:
IF u2026..
perFORM LOC_CURR_CONVERT
USING COMM_STRUCTURE-ORDER_VAL
COMM_STRUCTURE-DOC_DATE
COMM_STRUCTURE-ORDER_CURR
COMM_STRUCTURE-LOC_CURRCY
COMM_STRUCTURE-EXCHG_RATE
CHANGING RESULT.
I verified in the INCLUDE (RS_BCT_MM_UPDATE_RULES) and the subroutine is as follows:
FORM loc_curr_convert
USING lc_document_value
lc_date
lc_document_currency
value(lc_local_currency)
lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
AND NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL ) .
lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
date = lc_date
foreign_amount = lc_document_value
foreign_currency = lc_document_currency
local_currency = lc_local_currency
rate = lc_rate_dec
IMPORTING
EXCHANGE_RATE =
local_amount = lc_local_value
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5.
IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
sy-subrc.
ENDIF.
ELSE.
if conversion not possible -> assign target values
lc_local_value = lc_document_value.
lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.HI,
Thanks so much the explanations.
I just verified again on our dev system and the update rule for 0GR_QTY (Actual goods receipt quantity) include the following:
perFORM QUANTITY_CONVERT
USING COMM_STRUCTURE-CPQUAOU
COMM_STRUCTURE-po_UNIT
COMM_STRUCTURE-base_uom
COMM_STRUCTURE-numerator
COMM_STRUCTURE-denomintr
CHANGING RESULT
Now, in the include, I also found:
FORM QUANTITY_CONVERT
USING QC_SOURCE_VALUE
QC_SOURCE_UNIT
VALUE(QC_TARGET_UNIT)
QC_UMREZ
QC_UMREN
CHANGING QC_TARGET_VALUE.
i. Does it mean it actually does quantity conversion?
ii. If you have access to the INCLUDE I will appreciate some hints on what the subroutine QUANTITY_CONVERT is doing. It does not appear do to be saying anything about quantity conversion; but it is supposed to be doing something with the parameters being passed from the update routine.
iii. In your response to #5, after all the computation in the INCLUDE, what comes back to the Update rule i.e. what comes back to become the value of 0GR_QTY?
Is it the u201CRESULT.u201D in the update rule or u201CQC_TARGET_VALUE.u201D in the subroutine in the INCLUDE.
iv. So, am to create an Update rule for 0PSTNG_DATE and the source is BUDAT; and I need to write a routine using the include INCLUDE RS_BCT_MM_UPDATE_RULES.
I looked through the INCLUDE and identified all the subroutines in this INCLUDE as follows:
QUANTITY_CONVERT
LOC_CURR_CONVERT
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Does it mean that to use this subroutine, I can only use the USING parameters of one of these listed subroutines?
--Also, does it mean that because 0PSTNG_DATE is a date, I can only use one of
GET_WEEK
WEEK_DAY
QUARTER_DAY
--Or, are there other includes to be used for 0PSTNG_DATE
Thanks -
Can you help me understand the use of the word POSITION in TR and CFM?
Hi,
I am trying to have a view of typical BI reports in TR and TM/CFM so through my research I came to the following link:.
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/08193c38f98e1ce10000000a11405a/frameset.htm
My problem on this link and other postings on this site seem to be the same. Can you help me understand the use of the word POSITIONS in these context:
1. Our client has asked for financial transaction reports in BW, such as position of Borrowings, Investments and Hedge Operations (TM data).
2. I have a requirement on, some reports related to Money Market (Fixed Term Deposits, Deposits at Notice) something on FSCM-Treasury and Risk Manager. These reports will be similar to that of Loans, i.e. Position statement, flow statement, etc.
3. The set of position values for a single position or a limited amount of positions can be reported by transactions TPM12 and TPM13 in R3.
4. 0CFM_C10 (Financial Positions Cube)
Do you have some simple report outputs to help clarify how the word POSITION is used in such environments?
Thanks
Edited by: AmandaBaah on Feb 15, 2010 4:39 PMIf I future buy 10 shares in company at £1 per share - at the end of the day my potential value is £10
The next day the shares drop tp £0.9 per share - I have a negative position - my shares are only worth £9
I haven;t bought them yet - but I have a negative position - ie if things stayed as they are - I am going to realise (ie end up with) a loss
Now you can use this for loans and foreign exchange banks as well...
Maybe you are looking for
-
2 iTunes accounts on the same mac
I have recently set up an account for my girlfriend on my mac I now wish to create her own music library in her account how do I transfer all my music to her library so she can sort what she wants I also need the seprate account as she has got an iPh
-
Moving files/catalog to an external drive
I have an iMac with a 1TB Time Capsule via ethernet and I am running out of room on my 320G HD in the iMac. I'd like to move my 100G of photos from the iMac to the Time Capsule and then point to them. Would this be better done via LR vice Finder? Can
-
Dear All, When we create a debit / credit entry for vendor with reference to a P.O. due to some price difference in P.O. & bill of vendor,the amount which pass thru debit / credit entry will load on material price. if yes then please giv
-
Return receipt for the purchase order through mail
Hello Friends, Can anybody tell me How to receive the return receipt for the purchase order through mail.
-
Fonts don't look as good (even on an imac)?
Is it just me or do the fonts look worse on snow leopard? I just installed it, and I first noticed it in Mail -- all the text for my mailboxes look a little harder to read. The text rendering just doesn't seem to look as good. Anyone else notice this