Can you hook up multiple pairs of wireless headphones to the MDR-DS6500 base unit

Can you hook up multiple pairs of wireless headphnes to the MDR-DS6500 base unit or do you need a base unit for every pair you would like to connect to your tv? if you can which models are compatible?
Thanks

Do I need an AirPort to attach to each set of speakers that I want to connect, or is there another kind of receiver I can hook up to the speakers that do not have any kind of WiFi or Bluetooth configuration?
You basically have two choices: 1) Place an AirPort Express base station at each of the speaker locations, or 2) Use an AirPlay-Ready receiver that offers whole-home audio support. The latter would require that all speakers be connected back to the receiver.
Also, if I am planning to set up the airplay by using the extended network configuration, then the Wifi base station does not need to be an AirPort station? I have Fios and had trouble last time I tried to hook up an AirPort in place of the router that they provided.
The AirPlay networking protocol requires either a wireless or wired connection between the AirPlay server (typically iTunes) and the AirPlay speaker (AirPort Express, Apple TV, or an AirPlay-Ready receiver or speaker). AirPlay will traverse over an extended Wi-Fi network regardless of which manufacturer hardware is used.

Similar Messages

  • Can you hook a jetpack to a wireless router

    can you hook a jetpack up to a wireless router

    http://community.spiceworks.com/topic/377853-wireless-router-as-a-bridge-to-verizon-jet-pack
    It can be done. However I normally use my broadband network and a wireless repeater. I use Netgear and Belkin, both work together nicely and you can place repeaters all over your home and property.
    Additionally on my broadband modem I have opened up a WiFi connection for emergency access. Its buttoned up with high security but I access WiFi on the Netgear R6300 both wireless and hard connect(RJ-45) and through the Belkin Repeater both WiFi and hard connect (RJ-45) and I use my broadband modem/WiFi as both WiFi and hard connect (RJ-45) with absolutely no interference.
    The basic principle is or should be the same with the jetpack as used as a pass through . See the link above.
    Good Luck

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • How can you hook up multiple camcorders for video shoot?

    I'm making plans for my wedding and I was interested in recording it with stationary camcorders and my Macbook Pro's webcam of the event. I've hooked up my camcorder before as a additional webcam, but I have't recorded from multiple camera's before. This is importabt because I was also thinking of streaming the video from all 3 cameras online so friends and family could watch the event from out-of-town.
    I was thinking I could use my Final Cut Pro software to bring the Camcorder footage in using firewire, but I'm not sure about the computers webcam.
      I would really like any opinions and suggestions that don't require additonal purchases.
    Any past experiences would be appreciated.

    Hello JamieLG. Welcome to the Apple Discussions!
    First, let's double-check your AirPort Express Base Station's (AX) settings...
    AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
    Setup the AX
    Connect to the AX's wireless network, and then, using the AirPort Admin Utility, check these settings:
    AirPort tab
    o Base Station Name: <whatever you wish or use the default>
    o AirPort Network Name: <whatever you wish or use the default>
    o Create a closed network (unchecked)
    o Wireless Security: <your current wireless security setting: None, WEP, or WPA>
    o Channel: Automatic
    o Mode: 802.11b/g Compatible
    Internet tab
    o Connect Using: Ethernet
    o Configure: Using DHCP
    o WAN Ethernet Port: Automatic
    Network tab
    o Distribute IP addresses (checked)
    o Share a single IP address (using DHCP & NAT) (enabled)
    If you have wireless security enabled, which type is it: WEP, WPA, or WPA2?

  • Can you hook up to ethernet

    Can you hook up ethernet to express; have access to multiple computers, pick the one you want, drill down to that itunes library and play the associated songs and playlists?  Also, is there a way to play internet radio; lastly can you control this via an iphone?  if so how? is there an app that can allow users to access thier windows computer and see thier itunes library?

    Yes it sounds correct. They can be Windows computers, they just have to be running fairly recent versions of iTunes and they all have to be on the same network. Wired or wireless makes no difference.
    If you have an Express it can also join your network wirelessly or via Ethernet. They can be configured to connect to your network either way.
    With the iPhone's Remote app you simply click the gear icon and click "add an iTunes library". You go to that computer and type in the code to authorize it. Sharing has to be enabled in iTunes Preferences also. Home Sharing uses your Apple ID so the other computers all have to use the same one.
    Also, if you are using Windows you will almost certainly have to configure its firewall or anti-virus software. Such things are designed to hinder all sorts of communication and they're all different so you may be on your own trying to figure that out.
    Apple has lots of instructions regarding Home Sharing, if you're not getting anywhere start with this:
    http://www.apple.com/support/homesharing/

  • Can you hook two printers to the airport extreme

    Can I hook up multiple printers to any of the airport devices?  the middle one has more than one port - one for printer and one for hard drive.  Can I put a printer in each port?

    Hi - you can connect mutiple USB printers via a USB hub - you can also connect multiple printers to the ethernet ports on an Extreme or Time Capsule - you can do the same with an Express with an ethernet switch - you can also do it wirelessly

  • I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

    I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
    In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
    For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

    Right click any tab and choose "Bookmark All Tabs".

  • Can you set up multiple user accounts on one laptop?

    can you set up multiple user accounts on one laptop?

    Of course.
    And instructions can depend on which OS X is installed.
    For v10.7 Lion > OS X Lion: Create a new user account
    For v10.8 Mountain Lion > OS X Mountain Lion: Create a new user account
    When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 

  • Can you set up multiple Facebook users on 1 IPad 4?

    Can you set up multiple Facebook users(2) on one IPad 4?

    I think maybe on different users on one computer - but not on the same one.

  • How many devices can you use on an airport express wirelessly?

    How many devices can you use on an airport express wirelessly? Does it matter how many devices you have?

    The Express supports up to ten clients.

  • Can you hook an ipod classic up to a stereo receiver with an RCA jack adapter?

    Can you hook an ipod classic up to a stereo receiver with an RCA jack adapter?

    Something like this?
    http://www.daydeal.com/product.php?productid=11487
    B-rock

  • Using table comparison transform can you point to multiple tables as target

    Using table comparison transform can you point to multiple tables as target tables?
    Thank you very much for the helpful info.

    If you want to feed the output to multiple tables, you can do so, but you have to be cautious enough on which table to be used as a comparison table in this case. The comparison table provided inside Table Comparison will be compared against the input data set for generating opcodes (Insert / Update / Delete) to input rows.

  • Can you simultaneous sample multiple SCXI-1520 cards in multiplexed mode?

    Can you simultaneous sample multiple SCXI-1520 cards in multiplexed mode?
    In parallel mode, you can have all channels sampled and held, and then have each
    of your E or M series cards multiplex through each of the 8 channels of each card.
    This yields simultaneous sampling on all channels at a faster rate in this "SCXI-1520
    Parallel Mode" than you can derive from the "SCXI-1520 Multiplexed Mode."
    Does the "SCXI-1520 Multiplexed Mode" also provide the capability to Simultaneous
    Sample and Hold, all be it at a slower net throughput yield then the "SCXI-1520 Multiplexed Mode?"

    Hello,
    Thank  you for posting to the NI Forums! The SCXI-1520 User Manual does indicate the Simultaneous Sample and Hold can be used with Multiplexed Mode. Please refer to the last two paragraphs of page 69 and the first paragraph of page 70 for a better explanation. Hope this helps! Let me know if you have further questions!
    Message Edited by Margaret F. on 04-21-2009 05:25 PM
    Regards,
    Margaret Barrett
    National Instruments
    Applications Engineer
    Digital Multimeters and LCR Meters

  • (261718088) Q: Can you use xm:multiple with Objects other than String?

    Q: Can you use xm:multiple with Objects other than Strings?
    <br>
    A: You bet. Attached find a text file with some code from the example I showed
    today, a version of the multipleSayHiTo() method that has a parameter of an Array
    of Person objects rather than a parameter of an Array of Strings. The code within
    the text file comes from the Greeting.jws file (the Greeting Web Service).
    [multiple.txt]

    So you are saying that the recovery discs I made do include the copy of windows that was originally installed?
    Absolutely! They will restore the hard disk to its original out-of-the-box contents. Follow the instructions in the section Restoring from recovery DVDs/media, which begins on p. 73 of the User's Guide.
       Satellite A660 Series User’s Guide
    maybe i can make a deal with wd to have them swap this drive out for the BEKT instead...
    That would be a good idea in any case.
    As I said, the 10-fc12-045d error would not be due to the drive's being AFT, but more likely the discs are not being read properly. New discs can be obtained from Toshiba. Scroll down to Get Recovery Media here
    -Jerry

  • Can you set up multiple profiles for I pad

    Can you set up multiple profiles for I pad

    Not sure what you want to do.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

Maybe you are looking for

  • Why is Johnny Cash under the C's in the music section on my iTunes?

    Instead of Johnny Cash being under the J's in iTunes, it's under the C's. When I type Johnny Cash in the search bar, the only artist that comes up is Johnny Cash & June Carter, which I have as a different artist entirely. Johnny Cash, solo, doesn't e

  • Return statement error and java.lang.noclassDefFoundError?

    public class Calculation      public static void main (String[] args)           int a[]=new int [12];           int iNum=0;           MainPrompt();      static public int MyInput()      return MyInput.readInt();      public static boolean MainPrompt(

  • Baffled by HUI on dm24/LE8.02

    Totally baffled by the HUI emulation function on the Tascam DM24/LE8.02. This was working for weeks on end, then all of a sudden I cannot get the HUI to work. I have control surface transport functions, which is separate from the hui, it uses mmc ope

  • Mac cursor disappeared. OS Lion 10.7.2

    I am having this problem for few days now. It happened when I was watching a stream video in full screen mode, then I move to another screen (3-finger swipe) to work on something else and the cursor disappeared. It's fine when I am not waching in ful

  • Branching issue

    Dear experts, I create a new member in page 34. I create the memberid from a sequence. When processing, I branch to page 37, where I like to set the memberid to the value of the just created member. (so in the branch definition I have selected to set