Can you identify this image gallery?

Hi All,
I client has asked me about the image gallery on this site, I wonder is anyone can identify it?
http://www.elili.com.au/collection.html
I have searched a few websites and resources, but no luck thus far.
Thanks for reading, any suggestions are graciously accepted!
p.

What makes you think it's not custom? I'd guess that it is.

Similar Messages

  • Can you identify this motherboard?

    I've spent several hours reading through all the tech support docs I could find, but I'm still not sure which motherboard I have for sure.  Here is what I know:
    --The motherboard has "K7T TURBO VER 3.0" stamped on it.
    --There is a sticker on the VT82C686 chipset chip that says: "MS-6330 MS-LITE"
    --The two Raid connectors and the J17 jumper (J17 = FSB jumper) were never soldered on!  The soldering connections are there, and they're labeled correctly, but the connectors themselves were never attached.  The K7T TURBO is supposed to have those connectors, and the motherboard manual assumes you can change the FSB using jumper J17.
    --I have the latest BIOS installed (Award version 3.6 for K7T TURBO), but the only options on the Frequency/Voltage Control page in CMOS are "Auto Detected DIMM/PCI Clk" and "Spread Spectrum Modulated".  The motherboard manual for K7T TURBO states there should also be settings there to control the CPU Voltage and CPU/Clock ratio, etc.
    --Yesterday I installed a new Athlon XP (Palomino) 1800+ CPU.  This CPU is supposed to run at 1.53 GHz, but the motherboard runs it at 1150 MHz, and I can't find a way to make it run faster.  The K7T Turbo board is supposed to allow it to run at 1.5 GHz.
    I'm starting to think I have a prototype K7T Turbo board with a dumbed-down chipset, essentially making it equal to the MS-6330 "Lite" version (which, BTW, only runs as fast as 1.2 GHz... but it's not supposed to allow Athlon XP's to run either, so go figure...).  Of course there's no mention of a hybrid board like this anywhere I can find.
    Anyone have a clue what's going on with my motherboard?  I'd like to get that CPU to run at 1.5 GHz instead of 1150 MHz because it's being used as a server.

    Quote
    Originally posted by Rasika
    Well, K7T Turbo R is green and has everything u say it has
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=100&MODEL=MS-6330%20Ver3.0
    Yes, I think that's my board, but without the optional RAID IDE connectors (the blue connectors in the lower left).
    BUT, the BIOS doesn't have the same options as what the motherboard manual says, and it doesn't allow my 1800+ Athlon XP cpu to go higher than 1150 MHz; I should be getting about 1530 MHz.  The cpu/clock options in BIOS are missing, so I can't set the CPU/clock ratio to 11.5 (133 FSB x 11.5 ratio = ~1530 MHz).  And YES I do have the latest BIOS (Award ver. 3.6).
    Plus the J17 jumper for FSB is not soldered on.
    So again, it looks like a dumbed down K7T TURBO with an MS-LITE controller instead of the regular controller.
    As a follow-up from yesterday, I was going to try turning the "High System Performance" option in BIOS on.  But unfortunately there IS NO option called that, even though the MB manual says there is.  So go figure.
    I sent an email to MSI tech support, haven't heard back yet.  I may need to call them and talk to someone up their chain a bit before I find an answer.
    Thanks for all the help everyone!

  • Customer Support: Can you identify this text message?

    Hi,
    Can someone from Verizon tell me why I got the following text and what it means:
    "//VZWVVM:SYNC:ev=NM;id=1;c=1;t=v;s=My Home Phone Number Here;dt=18/11/2014 14:53 -0500;l=9;dev_t=5"
    I have had 3 such undecipherable messages in the past few days (all a little different). They appear to be coming from Verizon.
    Thanks

    Yesterday afternoon I called my cell phone from a land line phone to leave a message to test the voice mail feature of the cell phone. The text I received, posted above, is a result of that voice message. It came in right after I left the voice message. I did not get an indication on my cell phone of that voice mail until this morning when I turned the phone on.
    It is still not clear to me why I got the text, or why it took so long for my cell phone to indicate that I had a voice message.

  • [Solved] Can you identify this font?

    What font do we have here?  My eyes seem to click with it nicely.  (And if not too off-topic, the theme?)
    I'd also like to greet and thank both the community and the developers.  Arch is a massive breathe of fresh air for a lifelong windows user.  Seriously, thank you!
    Last edited by sm0ky (2015-02-20 19:38:48)

    Head_on_a_Stick wrote:
    Have you tried Terminus?
    I find it to be the most readable of all the bitmap fonts.
    Absolutely, I agree.  It's what I currently use (along with a power-combo of Open Sans Semibold & Ubuntu for GUI/text).
    ANOKNUSA wrote:You posted a screenshot of the font. There are seven screenshots of the font on the website, plus the one you posted here. You seemed to think all those were fine, and didn't have a problem with the font until you installed it on your system with your font configuration. Maybe the typeface designer doesn't need to "take off the monocle and try to write/read something," since the font designer has obviously done that already, and there are clearly at least two people who think it's great. Just a thought. Another thought: HTML tags don't work on BBS boards.
    Thanks for the heads up on the tags.  I'll keep that in mind next time.
    Okay. I think you misunderstood a few things here. That's alright.  Please re-read my post in the context of it being an opinionated review. Note that the first metaphor is illustrating the disparity I experienced in 'seeing vs using' the font.  Also, assume the reader (you) to be the subject in the 'write/read' sentence.  As for the 2 people with opinions on record, well, I guess I'm glad to be the third.
    If you still require something a bit more objective or you need specifics on my font testing methodology or reassurance of a properly configured system, feel free to message me.

  • Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?  I open gmail. I want to save an email to one of my folders. I position my cursor over the appropriate Folder icon or by choice, to th

    Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?
    I open gmail. I want to save an email to one of my folders.
    I position my cursor over the appropriate Folder icon or by choice, to the Trash.
    The friendly finger pointing cursor icon changes to an arrow icon.
    The hand icon allows me flawless access to opening and/or moving emails.
    The arrow, however does not open the link.
    On the Google menu bar the cursor hand with finger opens the links to Everett (my name), Search, Images, Maps and Play.
    When I attempt to open the remaining links in the menu bar (YouTube, News, Gmail, Drive, Calendar and More) the arrow icon replaces the hand. The arrow icon does not work. It will not activate these links.  Nor does it open email messages in the Inbox.
    Usually I reset, even reboot Safire and sometimes the problem goes away, then reappears.
    Can you imagine if this condition should it happen to a tech savvy Google Support person? Perhaps one can share and make my problem go away.
    I am considering dropping Google as my mail source. Unfortunate!
    Everett Halvorsen
    [email protected]
    718.490.3824

    I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.

  • How can you upload an image to MYSQL using php?

    Ok this is a joint thread with one of my other ones because no one else  was posting on it, so I did not get what I needed, so, How can you  upload an image to mysql so when some one logs on to my site, they see  or can upload there own avatar, now there are loads of problems with  this, 1) many people don't know how, 2) It's not every day you try to  encode a image into mysql, 3) Letting people upload images into mysql  can cause traffic problem with people trying to log in. So that's it.

    Uploading images into MySQL is a bad idea, for more reasons than you mention. You should store the images in a directory on the server instead. But if you want to learn the hard way, here is the method:
    The mysql data type must be blob.
    The form enctype must be multipart, like this: enctype="multipart/form-data"
    The form input field myst be type file, like this: <input type="file" name="upload"/>
    Here is example code that prepares the variable $photodata to be inserted into the database.
      $uploadfile = $_FILES['upload']['tmp_name'];
      $photoname = $_FILES['upload']['name'];
      $uploadtype = $_FILES['upload']['type'];
      if ($uploadfile != "") {
    $tempfile = fopen($uploadfile, 'rb');
    $filesize=filesize($uploadfile);
    $width=getimagesize($uploadfile);
    $widthx=$width[0];
    $heightx=$width[1];
    if (($widthx > 102) or (heightx > 135)){
    $image_too_big = " but the image size was too large and was not submitted.";
    } else {
    $photodata = fread($tempfile, filesize($uploadfile));
    $photodata = addslashes($photodata);

  • How can you add an image in Mail without being an attachment?

    How can you add an image in Mail without being an attachment?
    In otherwords I'd like to put my logo in the email not as an attachment but as an image.
    Is there a simpel solution to this problem?

    PBN1 wrote:
    How can you add an image in Mail without being an attachment?
    You don't.
    It's not possible. The e-mail protocol is designed for text; anything else has to go as an attachment.
    Different mail clients (such as Mail.app, the mail client bundled with Mac OS X) may have different ways of handling such attachments, but they are still attachments. Each mail client has its own rules and methods, so one may display a picture as if it were in the body of the message, but another client may do something completely different.
    A way of faking it is to format your message in HTML (which is a kind of text). The image is hosted on a remote server, not added to the message; instead, you include a link to it in the body of the message, as you would when building a web page. (This is also what the two tips helpfully provided by X423424X do, except that the link to the image is added in the signature, rather than the body of the message.) What exactly happens to it is, again, at the discretion of the mail client. In my case, for instance, displaying images in HTML messages is turned off, and will stay resolutely off.

  • Can you add an image as a spacer in SpryMenuBars?

    SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1
    Version CS5 DW – Windows XP 32bit system
    Can you insert an image as a spacer in the Spry Menu Bar widget?
    Page link: http://test.thunderscientific.com/NewMenuTest-Vertical.html
    I need to insert an image between menu items; About Thunder and Product Information that matches the height and width of a new menu item with no link to anything.
    I’ve tried the image as a background image and it just shows up as the image for all menu items and that’s not what I want.
    Would I put the code in the HTML or in the CSS?  I’ve tried both to no avail.
    I also tried to add a new CSS rule and that didn’t work ether.
    Is what I’m asking even a possibility?
    Thanks,
    Thunder Bolt 
    Menu

    I just wanted to say thank you to "vw2ureg" for answering my post, and very quickly I might add.
    This worked perfectly, the only thing I had to change was, the background from a color to an image, and the height to 15 pixels and it worked great!
    Thanks very much…
    ul.MenuBarVertical a.spacer {
    background-image:url(../images/image.gif);
                    cursor: default !important;
                    height: 15px;

  • Can you add an image to an External Style Sheet?

    Can you add an image to an External Style Sheet?  If so how?
    I have not been able to find examples of this?
             Help
                        Obvious Newbie

    To populate all pages in a site with a common banner image or menu, read DW help about Templates, Library Items or Server-Side-Includes.
    As Nadia said, you can style a #header division with CSS to use a background image.
    EXAMPLE here:
    http://alt-web.com/DEMOS/Liquid-header.shtml
    CSS code:
    #header {
         padding:0 10px 0 10px;
         line-height:0;
         color:white;
         font-weight:bold;
         background: #000000 url(../Images/Alt-Web-lensflair.jpg) no-repeat top left;
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics |  Print | Media Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    HTML Validator - http://validator.w3.org
    CSS Validator - http://jigsaw.w3.org/css-validator/
    Tutorials  - http://w3schools.com/

  • Can you replace existing images in Captivate 7 the way you can when using InDesign?

    Can you replace existing images in Captivate 7 the way you can when using InDesign? I need to replace some images but wondering if I'll need to reformat, resize, rename for the Advanced Action, etc.

    The work flow is a bit more complicated than in InDesign (keeps only a link to the image as you know in the frame). I understand the problem with the advanced/shared action references. This is my work flow, maybe someone else has an easier, shorter one:
    Right-click on the image and use 'Find in Library' or use CTRL-ALT-F if it works on your keyboard (doesn't on my AZERTY one)
    In the Library use the right-click menu to open the Properties or double-click the name of the image
    In that dialog box, choose 'Import' and choose your new image; for some reason you cannot choose from the Library however, which I find really sad because I'm used to import all assets to the Library.
    Drawback: if the new image has not the same width/height ratio, it will adapt to the original size of the image, you can use Edit image to repair. You'll keep the name of the image, you don't have to change advanced/shared actions.

  • Can you download raw image files to iPad2?

    Can you download raw image files from a compact flash card onto iPad2?

    According to this:
    It supports raw, but I am suspicious, since it does not state *which* raws it supports...
    http://support.apple.com/kb/SP580

  • I am using Toast 11 to burn dvd's. With FCP10.1.3  I could go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4?

    I am using Toast 11 to burn dvd's. With FCP10.1.3  I used to go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn.  How can you do this with FCP 10.1.4? 

    BenB it creates a disc image only and it's not in .m2v. I think it saved it as an Apple Pro Res 422 format instead. The disc image file format will not allow
    Toast 11 to create menus etc.  Thanks for your help.

  • How can i replicate this images drop shadow exactly

    How can i replicate this images drop shadow exactly from scratch
    http://i52.tinypic.com/2u41t7n.jpg
    If this sort of thing is not covered on this forum please direct me to an off site forum that would help me with this graphics question

    Trial and error, putting both the reference image and your new experimental image up side by side, is the only way I know.  I'd probably use the Info panel as well, to see that I'm getting the same or very similar color numbers from the new drop shadow.
    You can probably use the Magic Wand set to a very low tolerance value to select and copy the light colored object, then make a new document with a white background, paste in the copied object, then start experimenting with drop shadow.  Alternatively you could just redraw a portion of it.
    -Noel

  • Regarding receiving texts as emails:  Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

    Regarding receiving texts as emails:  Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

    Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
    It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing.

  • I have no audio what so ever i have seen in one of the tables where it was deleted how can you fix this i tried everything i know

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    i have been trying to get the audio to play for 3 days now i did see where it had been deleted this is a used comp i haven't had it long can you fix this i'm at my wits end
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows NT 5.0
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Default Plug-in
    *Adobe Acrobat Plug-In Version 5.10 for Netscape
    *Java(TM) Platform SE binary
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    *Network Object Plugin
    *Windows Multimedia Services DRM Store Plug-In
    *Npdsplay dll

    Hello Virginia.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

Maybe you are looking for