Can you import one TOC from one project to another? (RH9)

I have been working on a complicated project in RH9. (all work done in RH)
I made all the modifications to the htm files that I needed.
I went to rename the .htt file and upon entry, RH 9 CRASHED!
When I reopened, my TOC was entirely GONE!
Luckily, I made a backup of the entire directory a few hours ago.
Options:
A.) Revert to backup and redo hours of work (not what I want to do).
B.) Somehow import the TOC from the backup to the new project.
I hope this is a dumb question and very easy to do. It is a VERY complex TOC (prints out to 11 pages) so I do not want to redo from scratch.
I await all of your expert advice.
Thank you so much!
DianaJ

Hi,
To import a TOC into existing project you may follow the steps as below:
1. Go to Project Manager POD and expand the TOC folder
2. Click New TOC in the Right Click Menu
3. Give the desired name to the TOC you want
4. Check the checkbox "Copy existing Table of Contents" and browse to the TOC file that you want to import
5. Click OK and all contents of the TOC should be imported.
I hope it works
Thanks

Similar Messages

  • Can you import a master from one Muse file to another?

    I've got upload space through Comcast, and my homepage and other material are there.  (home.comcast.net/~gregfisk/)
    But I have another site that I uploaded there through Dreamweaver a year ago.  I'd like to update it with Muse.  (www.caption-ator.com)
    But the thing with Muse is, when it exports a site to HTML, it defualts the home page to 'index.html'.  In this case, the caption-ator site info (made with muse) would over-write my main web page.  The same goes for any files that share the same file name, like 'site global.css', and 'sitemap.xml'.
    So I guess I should take the site info from the caption-ator Muse file, and rebuild it in my personal web page. So there will (theoretically) be no conflicts in the file names, and can all be uploaded safely.
    Rather than rebuild the whole Caption-ator muse built site in the Muse file for my personal web  page - is there any way to take a Master page from one Muse file, and import it to another?  That would be a HUGE time saver.  My first instinct would be to take the Muse tab for my personal web page, and the Muse tab for the Caption-ator web page, then drag and drop the Master from the Caption-ator page to the personal web page.  But Muse doesn't seem to allow for tabs to be kept separate like that.
    Any advice is apprecaited.

    If you still have the .muse file for the template you want you can open it up in Muse 'Select All' --> Copy.
    Open your destination blank template and paste it. You can have bothe muse files up in Muse at the same time.

  • Can you import form responses from one responses file to another? I know you can export...

    I have a distributed form with a responses file that has six responses in it. Somehow the distribution got cut off and I had to set up a new distributed form and a new responses file. I was able to export the six old responses to a .csv file, but have not found a way to IMPORT the .csv file into the new responses file.
    "Add" does not work-- it is looking for PDF files only. Does anyone know a way to import those 6 responses into my new responses file? The distributed form did not change in any way, so all of the fields are still exactly the same.
    I can create a master portfolio and just add the two portfolios together, but they just remain as file icons within the portfolio and I need the data to be inline together in one file.
    Thank you very much.

    If you still have the .muse file for the template you want you can open it up in Muse 'Select All' --> Copy.
    Open your destination blank template and paste it. You can have bothe muse files up in Muse at the same time.

  • Can you import itunes content from one laptop to another?

    hi
    further to the subject, both laptops are mine & wonder if it's easy to export/import between both laptops. a minor?? difficulty is one laptop is in London & the other in New Zealand. Both Laptops have iTunes set up on them now.
    thanks, Stuart

    umm

  • How can you move the objects from one server to another?

    how can you move the objects from one server to another?

    Hi,
    Collecting objects for Transporting
    1. rsa1->transport connection
    2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
    3. then choose your infocube and 'transfer'
    4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
    5. after objects collection finished, create request
    6. If they are $TMP, then change the package.
    7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
    8. You can check the request in SE09 to confirm.
    Releasing Transport Request  
    Lets say you are transporting from BWD to BWQ
    Step 1: In BWD go to TCode SE10
    Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
    Note: First release the child request and then the parent request
    Steps below are to import transport (generally done by basis )
    Step 1: In BWQ go to Tcode STMS
    Step 2: Click on Import queue button
    Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
    Step 4: Click on refresh button
    Step 5: High light the trasnport request and import it (using the truck icon)
    Transport
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
    Hope this helps.
    thanks,
    JituK

  • Can  you move your notes from one iphone to another and how?

    Can you move your notes from one iphone to another and how?

    You can do this a couple ways.  If you are using MobileMe, notes is one of the options for synchronization and that would be automatic.  Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

  • Can you edit a person from one photo and add them to another photo?

    Can you edit a person out of one photo and add them to another photo?  Like if you need the head shot from one photo to replace closed eyes in the other photo?  Thanks.

    Thank you very much!  Does this require software to be purchased?  I'm new to Photoshop. 
    From: Bill Hunt <[email protected]>
    To: Kittie Gugenheim <[email protected]>
    Sent: Monday, April 25, 2011 11:46 AM
    Subject: Re: Can you edit a person from one photo and add them to another photo?
    Welcome to the forum.
    Yes, this is done often. You will need to create a Mask of that person, to separate them from the background of the original Image.
    I like to do this with a Layer Mask, as it offers control, and really does not alter the Image, so you can go back and make changes.
    Let's say that you have Image 01 w/ the head of your subject, and want to place it into Image 02. In Image 01, make a rough Selection. I would include a bit of extra background, as we will take care of that in a moment. With that Selection active, Copy the head shot. Go to Image 02, and Paste it. It will Paste in its own Layer. Ctrl+T (Free Transform) can be used to Scale and also position that Layer with the head. Once you have that Scaled and positioned about where you want it, create a Layer Mask. In QuickMask Mode, just paint in the additional Mask to remove all traces of the background that came in with the head shot. As you can paint OUT, and also paint IN the Mask, you can work on this, as many times as you wish - even next year.
    For getting that Layer Mask looking good, work slowly, also see this http://graphicssoft.about.com/od/photoshop/l/blrbps_5agirl.htm.
    I've got another tutorial, that addresses the hair area, and will post that, when I find my bookmark.
    Good luck,
    Hunt

  • Can you import video directly from a video camera ?

    Can you import video directly from a video camera to the iPad 2 ? If so, what is needed?

    I would say no. I have an Ipad2 with the connection kit. A recent Sony camera which works fine in imovie for my 27" imac, but nothing with the Ipad. Only thing that it finds are pictures that can be made with the same video camera. Apple wrote a note aboit probkmes with importing, but i'm very disappointed with what i have right now.
    http://support.apple.com/kb/TS3719

  • Pages-when using template for envelopes can you import names/address from address book

    When using templates for envelopes can you import names/address from the address book?

    Drag the VCard from Address Book onto the open envelope template.
    If you want mutiple addresses make a Group of those in Address Book and drag the Group icon onto the Pages template.
    Peter

  • Can you import movie videos from SD camera card

    Can you import movie videos (MP4) into an Ipad from an SD camera card on a Lightning cable ... or can you only do this from a laptop via Itunes? In other words, is Itunes the only way to get non-Itune videos to the Ipad? Hope I havent made this sound confusing.

    To import the videos must follow a very strict naming convention.
    All file names must have 8 characters for a name and be located in a folder named DCIM
    for example
    DCIM
    MOV_5789.mp4
    You can't watch the videos off the cart, they must be imported into the iPad. They'll go into the camera roll, when you tap on them it'll open the video app and you can watch from there.

  • Can you copy Subtitle Streams from one project to another?

    I inserted subtitles onto a track and would like to use the same subtitles on a new track; can I copy them and paste them into the new project?
    How can I do this?
    Many thanks!

    What you can do is export the item description for the track (File->Export->Item Description) which will export the track, including the subtitles. Then import that back into the project or new project, subtitles will come in, though you would need to change the video portion (if needed).

  • How can I import my iphotos from one account to the other?

    Someone knows step by step iphoto from one account to the other. I am admin but still I do not know how to bring my iphotos to a different account
    thanks for help
    marc

    Just the Photos?
    Export them from iPhoto to a folder on the desktop
    Put that folder in the Users/Shared folder.
    Switch User.
    Drag the folder from the Shared folder to whereever you want it.
    Share the Library?
    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder (but note: some users find ongoing permissions issues with the Library in this location. It might be better to use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

  • How can you take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in.

    As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event.  Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.

    Apple doesn't make it easy to do what you want.  However, here's how I do it. 
    Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
    In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to.

  • How can you remove a figure from one photo and put it in another?

    I am trying to move a figure (dog) from one photo/pic to another.  Is this possible with elements?

    Yes, you should not have any trouble.
    In Editor, go to the expert tab.
    Open picture B, the one you wish to select something from (the dog) to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position object from picture B.
    In the layers palette you should see picture A as the background layer, and object B on a separate layer.

  • Can you send custom events from one form to another?

    I have a compli
    cated application, where I about hundred inp
    uts organized in several input forms. Some of the forms
    require data which has been input in other forms. I have tried to
    dispatch custom events from one form to another, but it dispatches the
    whole form and I only need one or two items.
    Ha anybody else come across such a problem?
    Svend

    One way is to share data in a static singleton

Maybe you are looking for