Can you include navigational attribute in export datasource

Can you include a navigational attribute in an export datasource? If so, how.
Thanks.
Sandy

hi sandy,
i don't think so. navigational attributes are not available. you need to understand that in case of an ODS object the export data source is generated out of the change log table, so if any field missing in the change log table it will not be part of the export data source.
In case of cubes the characteristics and key figures reflects in the export data source.
but why do you need navigational attributes in export data source ? it conflicts the nature of nav attributes as you will be storing the history statically with reference to the data when it was loaded. if you really want the same nav attributes in your subsequent data targets then include the characteristic which has the desired nav attributes in your target cube and map it from the export data source of the source info-provider. Switch on the nav attributes in the target info-providers.
hope it helps
thanks
soumya

Similar Messages

Can we use Navigational attributes as Virtual Characteristics

Hi,
I need to derive the virtual characteristic based on 2 infoobjects in the multiprovider. One of the infoobject is a navigational attribute. I am using the BADI approach to create the virtual characteristic. Can we use navigational attributes to pass values to derive the virtual Char or is there any limitation.
Basically can I use the below code to read navigational attr
when <b>'0EMPLOYEE_0JOB'</b> OR '0PROFIT_CTR'.
          l_s_chanm-chanm = <chanm_used>.
          l_s_chanm-mode = rrke_c_mode-read.
          append l_s_chanm to c_t_chanm.
Thanks,
Kal

Hi Kal,
          I think you model a virtual KFig in the way you have suggested.I think the routine will work.Its looking similar populating a field using read masterdata.I think it will work.
Regards
Karthik

Can you put KM attributes in a office document?

Hello,
I have a question : "Can you put KM attributes such as a document version number automatically in a Office document"?
For iso documents it's needed to have a version counter in the word document itself. If the km version number could be copied into the document this would greatly reduce the number of errors.
Thanks,

Hi Frederik,
you would have to implement a repository service which subscribes to creation / modification of resources, then checks if the resource is an MSOffice document, and in this case modify this document again (this is also a trap, you would create a new version(!) and your RepService would get called again; without care, you will quite fast create an infinite loop..).
To set properties on a MSOffice document you could use http://jakarta.apache.org/poi - anyhow, as said, this sounds like not being very reasonable in the case when using versioning and / or approval services.
Hope it helps nevertheless
Detlev

How to include Navigational attribute in the selection screen

Hello All,
Can any body please tell me how to include a navigational attribute in the selection screen in BEX?

Let´s go step by step.
In your example, you mentioned the characteristic called 0MAT_PLANT. Its navegational attributes are allocated in the same dimension the main characteristic belongs. So 0MRP_CONTRL, as a navegational attr. must be allocated in the same dimension as 0MAT_PLANT.
1) In query designer in Bex (left pane) find the dimension where 0MAT_PLANT is allocated. Find the navegational attr. in the same dimension, 0MRP_CONTRL. Pls verify you are looking to a navegational attribute, activate technical names and the name of the attr must be 0MAT_PLANT__0MRP_CONTRL.
2) Below the attribut (still left pane) you will find a Variable icon (yellow). If you see the "+" symbol, it means that at least one variable exists (standar or not). Open it and check if the variable suits your requeriment to set it in selection screen. If not, create a new one (let me know if you need help with this task).
3) Once you have your variable for the navegational attribute, drag and drop it to the design area (row, column, filter).
4) Verify the order you want this variable to appear from the menu bar: Query properties -> Sequence of Entry Variables.
Hope this helps. Leticia
Edited by: Leticia Laura Locatelli on Oct 1, 2008 10:41 PM

How do you include date in PDF export from Keynote 6.2.2

In Keynote '09, I used to be able to insert the date in the bottom of a PDF export. Now that I upgraded to Mavericks, Keynote (6.2.2) appears to only have the option to "include name and date".
That's a useless combination. Those are 2 different things: (1) the filename, and (2) the date. At best, those should be two separate checkboxes.
I miss the feature to add ONLY the date to the PDF generated. I haven't upgraded to Yosemite yet but don't have my hopes up that this feature exists.
Am I missing something? How can I include the date in a PDF exported/printed/saved from a Keynote presentation?

Events are purely automatic, and will only organise on the date and time.
Make an Album of the photos and then you can drag them to any order you want.
Regards
TD

Can we Retract Navigational attributes??

Hi ,
I am retracting PS data from BI 7 to ECC6. Can you please tell me if it is possible to retract a navigational attribute which is not as part of the cube?
Thanks,
Srini.

You cant retract nav attribute.
However, you can try thru open hub.
Ravi Thothadri

Can you include two movies and formats in a keynote presentation?

One being a video podcast, the other being a clip from a store bought movie. And how would you include them? Thanks

As to the podcast, Keynote would do this by opening a web browser at a specific page using a hyperlink, it is unable to show the live video stream playing within Keynote.
Inspector > Hyperlinks > tick the 'enable hyperlink' option and type in the URL
Its actually better to just have the web browser open at the required page.
Using a retail video is fraught with problems; copy protection will block copying, digital rights management will block playing and it is illegal to circumvent these protections. It is also illegal to copy retail distribution video, unless you have explicit written permission from the distributor.

Can you include Norele in search engine list?

I was looking through the list of linked search engines in your list of 100. Could you include http://www.norele.com in the list next time you compile?

Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/add-to-search-bar/
Then go to any site which has a search field, place the cursor inside it and then right click and choose "Add To Search Bar".
You could also consider adding this one too: https://addons.mozilla.org/en-US/firefox/addon/context-search/
This will allow you to highlight a word or phrase on a web page, right click it and then use your search engines to look for it.

Can you include hyperlinks in an indesign doc. exported to HTML?

Trying to send an email newsletter that has images/hyperlinks and maintains its format.
When you export an indesign doc. into html code will the hyperlinks still work?
If so, what do I have to do to make sure that the links and images work after sending it in email body.
Thanks very much - any help is warranted

Hi, I was just wondering if you got the problem resolved. I'm asking because we are experiencing kind of the same issue in our office. Our Marketing Manager is using Adobe InDesign and exports her documents to PDF. These PDFs won't print in any of our printers in the office. It spools and then gets stuck and it actually makes our HP Coloured Laser Printer throw an error (error 79) and we'll have to restart the printer due to this error. We can print other documents and other PDFs in the printer so we know it's not a printer driver issue. In fact, we have isolated the problem to only PDFs exported from InDesign. Even if we create a blank document from InDesign and export it to PDF it still won't print. Really odd. We would appreciate if you could share your solution if you were able to fix the issue. Thanks!!

Can you set pager attribute using jstl c:out tag?

I am trying to use the pager tag library from jsptags.com. The pager tag has a maxPageItems attribute. I want maxPageItems to be variable. I also want to use the jstl instead of scriptlets and expressions. Instead of writing
<pg:pager
maxPageItems="<%= myPageItems %>" >I want to write
<pg:pager
maxPageItems="<c:out value='myPageItems'/>">When I do this I get a java.lang.NumberFormatException: for input string: ""
I think this issue is documented on the jsptags website. So maybe I have no choice but to use the expression format. I guess I should also mention that I am using jstl 1.1 and jsp 1.2 (implemented in tomcat 4.1.27)
Has anyone tried this and had success?
Did I provide enough information?

Sorry, but you can't use tags as attributes to other tags (where would it end?)
You're stuck with using <%= %> syntax.

PSPB - Can you assign 2 attribute dimensions to a single dimension

I am working on a PSPB install and am curious if I can associate 2 attribute dimensions to a single dimension? More specifically, NACUBO codes will be assigned as an attribute of Project ID. But NACUBO codes are broken up into 2 parts, Project Code and Program Code. I need to report on these 2 both separately and together.
Thanks,
Max

Yes, you can. You just cannot assign 2 attributes from the same attribute dimension to the same member.

Can you include ibooks in RSS to PSM?

Hello all
We've tried to add an iBook to one of our Oxford iTunes U RSS feeds and have been surprised to discover it's not working for us in the same way that .epub files do. We are getting the unsupported resource extension error (text below). Could anyone tell us whether we: a)Should be able to publish ibooks in the feed? & b) Is there a mistake in how we are presenting the resource in the RSS?
Many thanks
Carl.
Error text:
iTunes U could not update the content because iTunes U encountered an unsupported resource extension in the URL (http://media.podcasts.ox.ac.uk/internet/geographies/geographies.ibooks?CAMEFROM= itunesu) specified in feed (http://rss.oucs.ox.ac.uk/oxitems/generatersstwo2.php?channel_name=internet/geogr aphies-video&destination=itunesu). Until the issue is resolved, iTunes U continues to display the last downloadable version of the content. Verify that the feed resources contain only approved content types (mpeg audio, mp4 video, QuickTime video, PDF, mp4 audio) with appropriate file extensions (mp3, mp4, mov, pdf, m4a), and then try again.
Carl Marshall
Podcasting Team - Technical
Learning Technologies Group Services

Hi Erik,
This doesn't make sense to us particularly. Course Manager provides a way of wrapping any resource on the iTunes Store (i.e. including iTunes U content), and that "wrapper" can then be published in the iTunes U section via the Public Site Manager webapp. We understand that Course Manager can act as a repository for ibooks, or they can be published to the iBookstore - but this doesn't explain why we can't have ibooks in our regular RSS feeds which already contain a mix of document types (including epub, even though that's not listed above as a valid option). We know the iPad is happy to open the ibook from visiting the RSS feed directly, so the only limitation seems to be on the PSM parsing....
Which brings me back to the two questions asked: Should we be able to do this, and have we made a technical error in how we've done this?
Thanks
Carl

Can you include an external data source in query condition?

Hi all,
I have a user that wants to run a report off a subset keys in an external data source. Is this possible in Disco Plus?
For example, he has an Excel file that is just a list of employee numbers. He then wants his Disco query to only bring back the employee records for the people listed in the Excel file. Right now, he uses Cognos and can do this. A visual representation of this would be a condiition that would accomplish something like this:
WHERE EMPLOYEE_NUMBER IN (Excel row 1, Excel row 2, Excel row 3, ...)
We do not want to have to load the data into a table each time to accomplish this, but no other way readily jumps out at me. Anyone have any ideas?
Thanks in advance,
Jewell

Jewell.
Given the situation you describe, I don't know of any 'reasonable' way to do this either the GUI in Desktop or the interface in Plus.
However - and just for the grins - there may be a possibility if done through the command line interface of Desktop. I truly doubt you'll want to do it - given the limitations - but ...
... in the command line interface you can put in the switch for /parameter such as: /parameter today trunc(SYSDATE), which means that your report is looking for a parameter called 'today' and you're putting in the data to put in the parameter 'trunc(SYSDATE)'.
So, you could either build the command line with a batchy-kinda-process in that via batch it reads a file as input and puts parameters, or hard code it manually (which no one would want to do). Problem is, if you have multiple values, I don't think it'd work as you're saying something like:
/parameter today (SYSDATE,SYSDATE-1,SYSDATE+!) - which I doubt would work as it probably only wants one value
or if you had:
/parameter today SYSDATE /parameter today SYSDATE-1 /parameter today SYSDATE+1
it also might choke.
Alternatively, you could investigate using Plus with the Java command line utility and see if it's possible to do a similar thing via Java.
... so long answer to a short question ... (my specialty) 8-)
Russ

Can you include feature like LIMIT in Mysql next release

Hi,
It brings me trouble in code design when using query:
SELECT col FROM (SELECT col, ROWNUM r FROM table ORDER BY ord) WHERE r BETWEEN 10 AND 20.
In most of other databases, such query can be done much easier, eg:
SELECT col FROM table WHERE cond ORDER BY ord LIMIT 10, 20
I think this is a "nice to have" feature in Oracle.
Sean

I need to specify the results are from row 10 to row 20As I said above, without any order by clause, there is no sens to get the rows from 10 to 20 (10th to 20th on which criteria ?).
So, when you will choose a criteria, you will able to get the rows from 10 to 20, for example :
SQL> select username, created, row_number() over (order by created) rn from all_users order by 2;
USERNAME                       CREATED          RN
SYS                            14/11/05          1
SYSTEM                         14/11/05          2
OUTLN                          14/11/05          3
DBSNMP                         14/11/05          4
PS                             14/11/05          5
H89UCBAC                       14/11/05          6
PEOPLE                         14/11/05          7
ONE                            06/07/06          8
TITI                           11/07/06          9
TOTO                           31/08/06         10
TATA                           21/09/06         11
11 rows selected.
SQL> select username, created
2 from (select username, created, row_number() over (order by created) rn from all_users)
3 where rn between 5 and 8;
USERNAME                       CREATED
PS                             14/11/05
H89UCBAC                       14/11/05
PEOPLE                         14/11/05
ONE                            06/07/06
SQL> Wheck the doc for row_number, rank and dense_rank to see the differences between these ones. Depend of what exactly you want.
Nicolas.

Contact sheets -- can you include metadata?

We need produce a contact sheet that includes a small amount of metadata, specifically image dimensions and dpi. Obviously I don't want to type all of this in.
Any ideas about how to do this?
Thanks!

Hi,
Contact Sheet II does not have the option to include metadata for captioning. Since you don't have InDesign, try the link below.
http://ps-scripts.sourceforge.net/ContactSheetX/csx.html
regards,
steve

Can you include navigational attribute in export datasource

Similar Messages

Maybe you are looking for