Can you load two Zen Micros on Windows

Has anyone loaded two Zen Micro MP3 players to their system? I cannot get two to work properly. The new one won't transfer any music files. Can anyone help? Thank you.

The key thing is that the main versions are the same i.e. either .xx or 2.xx.
Even so, the player with .0.03 ought to be updated to ..0 as there are some important bug fixes.

Similar Messages

How can you tell a Zen Micro is fully charg

I've had my zen micro for a few days now (using .02.05 fw), and i've charged it via USB overnight.
I then used it for a couple days and the batter is dead. I then charged via USB today for about 4hrs and i got that fully charged icon. But after reading some other post, they suggest to charge for 8-9hrs? I charged it for only 3-4 hrs. Is this fully charged icon accurate?
TIA

My experiences:
On fw .02.x and earlier USB charging would be about 6 or so hours; the host PC needed the drivers installed and if so, and it found the Micro, pulsing would start and the lightning bolt icon was on. It seemed to me that no matter what the charge level of the battery was, charging would take 6 or so hours on USB, about 3 or so on the AC charger.
With fw .0.x I have been using driverless charging (put the Lock switch ON) then charge and now pulsing/lightning icon are on whether I am using a PC with driver or not OR if I use a 3rd party charge ie not the Creative AC one. Charge time is maybe 3-/2 hours. Now if I top up a charge, it will take whatever time it needs ...
In either case the Micro stops pulsing, the lightning icon is no longer displayed and when you switch the Micro back on, 4 bars are displayed to indicate charge level.
jake

Can you load Creative Suite 4 onto Windows 7?

Help!! I had to upgrade my computer and just noticed the box for Creative Suite 4 says the system requirements are Windows XP and Vista. I'm not in a postion to buy new software. Will it work if I try to load it?

Yes. Windows 7 did not exist when CS4 shipped.
CS4 will install and run OK on Windows 7.

Can you load Illustrator 8.0 on Windows 7 64 bit operating system?

I just bought a new Dell Desktop that has Windows 7 64 bit operating system.
My old version of Illustrator 8.0 at Set Up will not load ?
Is there a work around for 64 bit ?
please try an e-mail to [email protected]

Same question here: http://forums.adobe.com/thread/1108086

Once you purchase CC for AE can you load it on two machines?

once you purchase CC for AE can you load it on two machines?

Yes.
This is addressed here:
Creative Cloud / Common Questions

Mp3 Player not detected in Vista ,I need drivers for Creative Zen Micro in Windows Vista 32-b

Hi ,?Im trying to install my Creative Zen Micro in windows Vista , But A Compatibility Problem appear and i can't install it .Windows Show me that a new hardware is found? and what i have to do , i Install it with the CD , but The installation can't be successful and a message saying me i have to contact Creative Support for the dirvers appear and the installation can't be completed. I've tryied to contact creative suport , but they don't find solution . I've searched the drivers but they wasn't found in creative site web . If anybody Have a solution for install my zen micro or can help me , please ... I have to buy another Mp3 Player ? This have a solution ?Thanks ,i hope that you can help me. Regards

I updated my Firmware as stated by Creative Labs support team. I downloaded on my son's PC which has Window's XP Pro edition. Again, on his PC there is no problem with recognition of the device and/or player. However, when I plug my player into my PC which has Vista, the device manager has a "!" next to ZEN Micro Photo. So my PC "See's" the player. However, when you right click and then go to "Properties" it states that "The drivers for this device are not installed (code 28)" Then it states to "reinstall the drivers" But when I tried to install or reinstall the "Driver" using the install wizard, I get an error message... "An error occurred during the installation of the device" and " A service installation section in this INF is invalid" Then a pop bubble appears and says "Found new hardware" You may have a problem with your device. It may not be working properly" So what do I do at this point. The only way for me currently to download music is to use my son's PC. At least I have another option... I feel sorry for the rest of you. When will creative wake up and smell the Vista!!

Zen micro and windows vi

Hello. I just bought a new Zen, and I want to move all my songs from?my old?zen micro to my pc so I can load it. The problem is that I can't find the zen micro drivers for windows vista. any tips will be appreciated.

WOW... Amazing support...

Can you have two itunes accounts on the same computer?

Can you have two itunes accounts on the same computer and if so how do you access them without syncing each others music?

Yes. Use separate iTunes libraries(launch iTunes with the Shift(Windows) or Option(Mac OS X) key held down as needed), or different user accounts on the computer.
(100648)

Can i load two different itunes on the same computer for two different ipods?

Can I load two different itunes on my computer for two different ipods? Or how can I get it so that when I click on itunes, only my songs come up and not my wifes? And the same for her.

Yes. The simplest way is to have separate Windows accounts for each user. When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

Can you have two Enterprise CA on the same AD Domain at the same time

Hello
Can someone please help me with the following question
If I have a Windows 2003 R2 Enterprise Root CA on the AD Domain can I also Add a separate Windows 2012 R2 Enterprise Root CA to the same domain.
We do not use Autoenrollment on the existing 2003 R2 CA.
Network guys want to introduce a Cisco BYOD (Bring Your Own Devise) solution using Cisco ISE (Identity Services Engine) which uses SCEP/NDES and therefore need certificates from CA. The thing is the ISE recommend 2008 AD CS as a minimum
Therefore I wonder if Installing a 2012 R2 Root CA that only provides certificates via the NDES/ISE solution would be a possibility.
I understand the Root CA Cert is held in a container under the 'Configuration' partition in Active Directory. Therefore can you have Two Root CA certs in the AD container at the same time for the same AD Domain/Forest?
The idea would then be to migrate other services to the new CA and phase out the old 2003 R2 CA over time.
Thanks All
AAnotherUser__
AAnotherUser__

On Thu, 18 Sep 2014 09:18:43 +0000, AAnotherUser wrote:
Therefore can you have Two Root CA certs in the AD container at the same time for the same AD Domain/Forest?
Yes.
Paul Adare - FIM CM MVP
You are trapped in a maze of screens and ssh sessions all alike.
It is dark, and you are likely to log off the wrong account. -- Nep

How many computers can you load Adobe software

We have four computers in our house (2 Laptops, 2 Desktops).
Can you load PS Elements on three computers?
I am thinking of upgrading to PSE10
Thank you
Bob

Your license will let you activate PSE on two computers.

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9?

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9? My former PC ran on Windows XP and this new PC runs on Windows 7. I don't want to shell out another $449 when Acrobat Pro 9 worked fine for me.

You might be able to install Acrobat 6 for this purpose, but you probably won't have to. When you install Acrobat 9 Upgrade it should (if I remember right) ask for the serial number of your "qualifying" product and at that point you put in the Acrobat 6 serial.

Can you load photoshop elements, disc version, on more than one computer?

Can you load photoshop elements, disc version, on more than one computer?

It‘s been part of recent versions, perhaps from PSE8 onward; I‘m not exactly sure. The software activates automatically upon installation. If you ever change computers and already have two activations simply open the Editor on the old machine and on the top menu click help à deactivate

Can you have two detail lists from the basic list at the same time?

Hi
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
Thanks
Venkat

No   ... it is not   possible   of   2 detail list at   one time   from the basic list ...
you can increament   the SY-LSIND .... But you can not   display both the windows   at single time ...
it is possible to display 2 Detail list in ALV   ...... from one basic list   using the Blocked list concept    .
Sample Program on BLOCK LISTS
Report   zblock_list
* Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:slis.
DATA:x_layout TYPE slis_layout_alv,
t_field TYPE slis_t_fieldcat_alv,
*--field catalog
x_fldcat LIKE LINE OF t_field,
*--to hold all the events
t_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
t_sort TYPE slis_t_sortinfo_alv,
x_sort LIKE LINE OF t_sort ,
*--Print Layout
x_print_layout TYPE slis_print_alv.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE add_catalog.
clear x_fldcat.
x_fldcat-fieldname = &1.
x_fldcat-seltext_m = &2.
x_fldcat-outputlen = &3.
x_fldcat-tech = &4.
x_fldcat-col_pos = &5.
x_fldcat-no_zero = 'X'.
x_fldcat-ddictxt = 'M'.
x_fldcat-datatype = &6.
x_fldcat-ddic_outputlen = &7.
if &6 = 'N'.
x_fldcat-lzero = 'X'.
endif.
*--build field catalog
append x_fldcat to t_field.
END-OF-DEFINITION.
*----- data declerations.
data: v_repid like sy-repid.
data: begin of itab occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
meins like mara-meins,
end of itab.
data: begin of jtab occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of jtab.
select matnr ernam meins
up to 20 rows
from mara
into table itab.
select matnr maktx
up to 20 rows
from makt
into table jtab.
v_repid = sy-repid.
*DISPLAY alv
* Initialize Block
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid.
*Block 1:
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
x_events-form = 'TOP_OF_LIST1'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'ITAB'
it_events = t_events
it_sort = t_sort
tables
t_outtab = itab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
x_events-form = 'TOP_OF_LIST2'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
* Append table block.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'JTAB'
it_events = t_events
tables
t_outtab = jtab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* exporting
* is_print = x_print_layout
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_list1.
skip 1.
write: 10 'List 1',
/5 '--------------------'.
skip 1.
format reset.
endform.
form top_of_list2.
skip 1.
write: 10 'List 2',
/5 '--------------------'.
skip 1.
format reset.
endform.
reward points if it is usefull ....
Girish

Can you use Time Capsule on a windows and 2 macs at the same time.

Can you use Time Capsule on a windows and 2 macs at the same time as either a backup for one and a seperate HD drive for two?

Yes.
From one viewpoint the Time Capsule is just NAS (Networked Attached Storage) and it supports the file sharing protocols necessary for both Windows and Macs.
From the viewpoint of the Macs it can also be used by Time Machine for backups.
As NAS it can be used for storing files, and there are many backup software packages that support NAS on both Windows and Macs.
In addition from a networking point of view it can serve as a router, wireless access point etc.

Can you load two Zen Micros on Windows

Similar Messages

Maybe you are looking for