Can you lower the sound of the "click" when sliding to unlock?

Settings>Sounds>Lock Sounds>On/Off.
Doesn't lower it, though. Just turns it off or on.

Similar Messages

Can you download relaxation sounds to the shuffle?

Can you download relaxation sounds from ITUnes to your shuffle?

Yes. Import them into your iTunes music library and then sync them over to your iPod just as you would with music tracks.
B-rock

Can you attach a sound to the video for editing?

In iMovie 9 If you detach the audio from one clip and move it to another, can you somehow lock it into place so that when you split video and clip parts, the sound gets clipped as well?

The headphone jack in the iPhone is a 2 way connector. It outputs audio to your Earphones, but can take input from a mic, lik the one embedded in the Earpods, or other wired hands free devices.
Basically what you may want to do is get something like this:
http://speechrecsolutions.com/iPad_audio.html
You may very well be able to just plug a mic with a 3mm plug into the headphone jack also. But not sure if that would completely work.

Can you use surround sound with the built-in optical out on dual 1.8 g5?

Ok here's the thing, I just got the new version of Final Cut Studio, and was wanting to set up my g5 to utilize the surround mixing capabilities of SoundTrack Pro 2.
I have verified that i'm getting 5.1 sound via Apple's DVD Player, but when i go to Applications-> Utilities->Audio MIDI Setup, I cannot configure the system for multiple channels. It only allows me to output stereo.
Is my assumption of being able to use the built-in optical out for 5.1 monitoring incorrect? Do I have to go buy a firewire/usb audio interface?
Info about my system:
I have a Bose Acoustimass 10 5.1 Speaker setup.
I have a Onkyo DR-C500 5.1 Receiver, which does dolby pro logic 2 and dts decoding.
The Onkyo Receiver is hooked up via the spdif optical output of my G5.
I have a Dual 1.8 G5 with this info about the Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)

NZane-
Greetings and welcome to the Apple boards.
The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
Luck-
-DaddyPaycheck

The sound of the ringtone is of lower quality than any other. I've tested it, and its happens to more people. What's it's the solution? Can I communicate this problem to apple?

The sound of the ringtone is of lower quality than any other. I've tested it, and its happens to more people. What's it's the solution? Can I communicate this problem to apple?

You can let Apple know here - http://www.apple.com/feedback/

How can you lower the number of days in IOS8 iPhotos deleted

In IOS8 photos deleted stay for 30 days. Can you lower the number of days?

To answer your Subject (rather than the body of your post)
To get the number of controls, and refs to each, etc, you can combine a
couple of example VIs and a little index finger grease to make a VI that
does what you want:
Help menu >> Find Examples
Find Example Dialog >>Browse tab
Programmatically controlling VIs
Manipulating Applications and VI settings
Edit Multiple VI Setups.vi
New Examples for LabVIEW 6.1
Queues
Queue Control Seek.vi
If these two VIs are put in a mixer and shaken (not stirred) you might come
up with something that tastes write.
Mike Ashe
"GL" wrote in message
news:[email protected]..
> I need to convert llb from 6i to 6.1 and I am unable to, I beli
eve
> because I have to many controls and indicators in the llb.

I'm having trouble with the volume of my i phone 4s when using headphones, the sound will only appear when the volume is at its highest, any lower and all I hear is static. Can anyone help me with this problem? Much appreciated.

Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Can apple fix my broken ipodtouch 4g if you can hear the sound but the screen doesnt show

can apple fix my broken ipodtouch 4g if you can hear the sound but the screen doesnt show

They will not fix it. What they do is replace rather then fix.
After Apple has examined it, they will determine if it is covered by warranty or not. If it is not, you will have to pay for the replacement.
Allan

When I closde a page where there has been a video, ie youtube or the like, the sound from that video that had played will continuw to run. I can close Firefox and upload it again and still will the sound of the video continuew to run. WHY?

When I close a youtube video or some other video and even after closing the tab the sound from the video continue to be played. As a matter of fact I have even closed Firefox and re-started Firefox and it plays again. I even went and turned off the computer and re-started the computer and then Firexox and the video sound was still there playing. WHY is this happening???.

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

Can i add a sound alert or message when someone comments on a pic of a photo stream when i am only another participant (not owner of the photstream)?

Hi,
How can i add a sound alert or message when someone comments on a pic of a photo stream when i am only another participant (not owner of the photstream)? Thank you. Joana

Joana,
that should be automatic.
See: http://help.apple.com/iphoto/mac/9.4/#pht884a8908
When you like or comment on a photo in a shared stream, a notification is sent to all the Apple devices of the photo stream’s creator and subscribers. You can delete comments you added to a photo by placing the pointer over the comment and clicking the Delete button that appears.
Usually the problem is the other way round - how to prervent spamming all subscribers to a shared stream from being alerted to each comment on a photo in the stream. Quite a few subcribers have cancelled their subscriptions to shared streams, because they have continously been sent alert messages and could not disable them. It can get rather annoying - there is no way to silently add a few comments to photos and then send only one alert.

How can I use the sounds of the Yamaha Motif XF6 in Logic Pro 9?

I have Logic Pro 9 on my Mac Book. I also have a Yamaha Motif XF 6 synthesizer. Instead of using Logic's software instruments I would like to record the sounds of the Motif directly into Logic.
I have been told that an audio interface is necessary for this. What kind of audio interface would be good for this? Any in particular?
And, once I have obtained the interface, what steps do I need to take to hook up the Motif into Logic to utilize the Motif's sound bank?
Detailed steps would help, as this is new stuff for me.
Thanks!

Since this is a user forum only, and your questions will take a lot of time to answer you might want to check both the Logic manual and the XF6 manual. The XF6 has possibilities such that you may not need and Audio interface if the Firewire option is present.
Also you have a built in USB MIDI interface as well, you will need to download the Yamaha MIDI driver.
Read Exploring Logic Pro, especially chapter five, you can record your performance via MIDI, edit it and then commit to audio.
Dig in.

I can't get the sound on the games to work on my ipad 2?~the sound on everything else is working

My ipad is working fine except the sounds won't play when playing games!

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

HT1766 can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Hi sandexpress,
As Ocean20 indicates, you want to make sure that you have automatic syncing turned off. In iTunes Preferences under Devices, make sure you have "Prevent iPods, iPhones, and iPads from syncing automatically" checked. Then connect each iPhone, and make sure that "Manually Manage Music and Videos" is checked on the Info page for each of them. Then go into each page for each device, and select what you want to sync to that particular device. (you would do this one device at a time - complete the steps for one of the phones, then connect the next one and do the same thing).
With this kind of setup, you can modify what will sync at any given time for a particular device once you have connected it to iTunes, but before you click on the Sync button at the bottom of the screen. If you want to change some sync options on a particular device, you would just go into the page you wanted to change (Music, Photos, Apps, etc.), make your changes, and then Sync.
If you do not have any changes, you can just hook up the phone and click on Sync.
Hope this helps.
Cheers,
GB

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.

How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.
It is possible to turn on/off options within the Side Panel by Customization of Groups.
But it seems You cannot influence the way Web Intelligence present (minimized or Off) the Side Panel in the IE??
Is there a solution for this??
If not, it would be a nice property of a Web Intelligence document in a future release.

Hi Nico,
we patched up to BI 4.1 SP 3 Patch 2
and look look
click side panel to minimize
so .. patch patch ...

Can you lower the sound of the "click" when sliding to unlock?

Similar Messages

Maybe you are looking for