Can you make a custom quicktime conversion export be your default?

When I go to export a quicktime conversion, I change the perameters to a custom setting for my need. Next time I go back into quicktime conversion, it goes back to the FCP defaults and I have to set my custom settings all over again.
Is there a way to create a custom export in quicktime conversion AND MAKE THAT the new default for quicktime conversion?
Alternatively, is there a quicker way to always get to my preferred export settings?
Thanks.

Why not just construct your favourite QT EXPORT setting in Compressor and then drag that setting into the box every time you want that type of movie?
K.

Similar Messages

  • Can you make a custom alarm clock tones

    is it possible to make a custom alarm tone such as a voice recording?

    You would need to do so on a computer and then import the ring tone to the device via iTunes.
    alternately, you can purchase tones from the iTunes store directly from the app, or set it to use any song you have in the Music app..

  • In imovie 09 can you make one continuous clip

    in imovie 09 can you make one continuous clip
    canu u download video in HDV to imovie 06 from a    SONY HDR-Fx 7 video camera as one clip

    No. iMovie 09 (and 11) is designed to import movies from camcorders. Every time it detects a start/stop it will make a different clip. They will be in chronlogical order, rather than edited order.
    If you still have iMovie 06, you can load the tape there as one continuous clip. Then EXPORT USING QUICKTIME choosing HDV as your codec. This will produce an MOV file that iMovie 09 or 11 can read, and which will be in the edited order.

  • FCP quicktime conversion export problem

    issue exporting still image instead of video
    FCP quicktime conversion export problem
    within the last 2 weeks i have exported from FCP studio 7.0.3  as quicktime conversion, the settings are:
    export as QuickTime Conversion:
    > Options> quality> set to Best>
    Standard Video Compression Settings
    Compression Type: H.264
    Motion:
    Frame Rate: Current fps
    Key Frames: Every 24 frames
    check Frame Reordering
    Compressor:
    Quality: Best
    Encodeing: Best (Multi-pass)
    Data Rate:
    Automatic
    Filter… none
    Size>
    Dimensions:
    NTSC 720x486 16:9
    >ok
    Sound: (don't change anything)
    Format: Integer (Little Endian)
    Sample rate: 48.000kHz
    Sample size: 16-bit
    Channels: (L R)
    >Export
    the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning  that does not show are composed of:  livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
    cant figure out why this is happening. anybody know?
    i think the livetype files are 1920 x 1080.
    my FCP sequence is 720 p
    this has only recently started happening and doesn't seem to be consistent.
    im wondering if it has to do with the live type files, or the white solid?…
    or the conversion settings above?

    Alistair
    Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
    Earlybird
    Corrupted render files (and render references) can be a pain because FCP will use those files and references  in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem.  The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
    As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
    Cheers
    Andy

  • Can you filter a custom report by postcode?  I want to send an email marketing campaign to customers

    Can you filter a custom report by postcode?  I want to send an email marketing campaign to customers within a postcode range.  How do you do this? Thanks.

    Hey RP in Oz,
    You can run a contacts report and select 'Default Address Type' as an 'Address Details Field' which will include the zip code a customer has inputted. You can then export the report, open it up in Excel (or similar) and filter based on the postcode. Once you have modified the list in excel, formatted it correctly and are satisfied, you can then import the report as a mailing list via E-Mail Marketing > Mailing Lists.

  • Can you make an animated gif from edge animate?

    Can you make an animated gif from edge animate?

    not natively. edge exports html and javascript files, not video files, or frames.
    however, you could use a third-party program that has a video screenshot function and make one that way.

  • Can you edit a pdf document without exporting it into a word document?

    Can you edit a pdf document without exporting it into a word document?

    Hi sylvias99766822,
    You can if you have Acrobat. If you don't, feel free to give it a try. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
    Keep in mind, though, that Acrobat isn't intended to be a word processor. So, while you can make adjustments to text and graphics, if you need to do a major overhaul of the text in the document, it's best to go back to the source document and edit the content there.
    Best,
    Sara

  • Can You Make A Good Song Without a Mic?

    im a 14 year old rapper who's career is based on garageBAND.
    well i was wondering,  can you make a good song without a mic..
    i think i have done pretty good without one.
    www.myspace.com/thereallilsilk
    but also you can tell the difference.
    but if i do get a mic (eventually)
    do you recommend me getting a USB mic, because i heard all you have to do is plug it in, set it up and your on your way...

    You say it yourself: A mic would greatly improve your sound. USB is a way to go, as you say, you just plug it in and don't have to go for a pre-amp or audio interface. Don't get one of the very cheap ones that might be okay for spoken conversations. The Samson C01U is a good condenser mic that you should get for around $ 80.

  • Can you make a movie for more than 2 minutes on an ipad and save it on a flash drive

    Can you make a movie for more than two minutes on the ipad and sve it on a flash drive using windows XP

    Using Apple's camera connection kit, you can use a flash drive to IMPORT photos and videos. However, you can't EXPORT any type of file to the flash drive.
     Cheers, Tom

  • Can you make iPhone ringtones (M4R) in Logic Express without GarageBand 08?

    Can you make iPhone ringtones (M4R) in Logic Express without GarageBand 08?
    If so how?
    Thanks,
    Ed

    Not exactly ... while you can make a ringtone with any application that you would like, Soundtrack Pro 2 and Logic do not have a conversion to the ringtone format. Mv4R or something like that. GarageBand does.
    I answered my own question I guess
    Thanks anyway,
    Ed

  • IWeb - Can you make a blog? Can you make a title and let people respond?

    Can you make a title and let people respond?
    For Example:
    'Do you like my new Book?'
    Comment:-
    ???

    Yes. You can add forms to you page which send you emails with the information the visitor put in the form. There are two types, one that you create with Form Action Code that you create and put in an html snippet, Form Action comment form, and more sophisticated forms that are created at a 3rd party site and embedded into a page with an HTML snippet and iFrame code as in this demo page: Embedding Forms & Encoding Email Addresses. With the second method you can set the form to any color combination you'd like. Another example of the Wufoo type is at the bottom of this demo page: QT Movie w/o Quicktime.
    OT

  • How can you make one button preform different actions in Xcode?

    How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

    Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
    I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

  • How can you make the iPod tell the diff between a movie and music video

    Greetings!
    How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
    Thanks for the help!

    Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

  • How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go??? Last week I was on holiday in HK,  and  from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!  Why THIS WEEK, can't I use my HS

    Apple_ID_card_declined_for_this_country
    How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go???
    Last week I was on holiday in HK,
    and
    from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!
    Why THIS WEEK, can't I use my HSBC Platinum Credit Card from Vietnam,
    for my Singapore Apple ID account ,
    while working here in Vietnam???

    Unfortunately, this is a problem that is driven by the DRM Dictatorship.  Despite the proliferation of mobile devices and the fact that there are many of us who do a lot of international travel, content providers don't want you to have access to their products outside of your homeland.  The Balkanized mentality of the DRM Dictatorship is way out of touch with the modern world.
    At least Apple, to its credit, allows you to use your accounts outside of your homeland as long as you have the proper credentials for them.  Most other services use the more Draconian geolocation filtering which does require you to be physically present in your homeland.  For the most part, you are not allowed to leave home if you want access to your favorite entertainment!

  • Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?

    Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?

    Turn Settings > General > Accessibility > Zoom to ON.

Maybe you are looking for

  • Referencing same cell location in multiple sheets?

    Hey all. I have a Numbers file with several sheets, the first of which is a summary of the rest. each sheet follows the same format. If, for example, in cell B4 of the first sheet, I want to display the sum of the numbers in cell B4 of every followin

  • How can i transfer and view tv shows purchase on my iPad to my IMac?

    I have tv shows both downloaded and in the cloud on my Ipad. I want to watch them on thy Imac. How can I have these two devices share?

  • Bapi or user-exit to create warning in invoice

    Hi, I was askes to create a warning whenever someone pushes delete within an invoice (mir7). The problem is that our users are not aware, that they are really going to delete not only the marked position within the invoice but the whole invoice. I´ve

  • Nokia Email Application problem since 06.07.2011

    Hi all, I'm using E71. Yesterday my Nokia email stopped synchronising my accounts and just displayed a password request field and a drop down menu for access point (on the usual pink background). However, I can't log in with my account password (the

  • Move Objects - X 40?

    I have created a Pages '08 document with a custom paper size of 54x36 to be printed professionally as a stand-alone poster. However, when I attempt to specify (i.e. type in) the X of any inserted object, such as a line, Pages refuses to allow X value