Can you make a text size altering bounding box in photoshop?
I am working on some titles combined with some graphics in photoshop and I'd like to make a bounding box that alters the size of the text for each line. Basically I want the name to be on the top at the full width of the box and then that persons job title on the next line at the full width of the box so that the edges line up but the font size is different and alters itself depending on how long the name and title is for each person. I know I could do this manually... and most likely will for now, but I've got 33 titles to make and this would be a whole lot easier. Is there a way to make a text size bounding box that does this?
Scripting or maybe even an Action might work but a real-time interactive rescaling Type Layer is not an option in Photoshop as far as I know.
Similar Messages
-
Can you make a PDF from multiple images open in Photoshop ?
Lets say I have 4 images open in different windows (or tabs) in Photoshop.
Can I make ONE pdf file from those 4 images at one single stroke ?
(I have PS CS4 EXTENDED)The answer is no, you would need Photoshop CS2 or CS3 to do this. This function was removed in Photoshop CS4 and CS5
You can create the PDF in Bridge though. -
Can you make a folio size of 1000 x 750 for iPad?
I have made a test folio this size and I can't seem to get it to load on Adobe Content viewer unless I have the iPad plugged into the computer. Is there a reason why? I am still in 25v. One of my ipads has IOS7 the other does not.
I am going to answer: NO
It appears that ipad doesn't want to load that size. So to make my android users happy I am going to have to make a 4th folio size. ugh!No, you can't. The iOS viewer will only open 1024x768 or 2048x1536 folios (well, there's two other sizes that work, but that's really for Woodwing users and they are only a few pixels different).
Trying to get an exact screen size match for Android devices is an awful lot of work for very little benefit. There are simply too many different Android sizes. Instead you can take advantage of the feature in R28 on Android where we will scale folios up as well as down to fit the Android screen. Then one version, published as PDF for Android, can scale quite nicely for all the different screen sizes there. You could even use your iPad 2 folio for this, assuming you don't have any Apple-specific content.
Neil -
Can you make the view size of Code page bigger?
If I change the View by zooming it only seems to work on the Design parts of the screen and not the text within the code section.
Is it possible to make this larger when I am editing?
Thanks, IanSure. Go into Edit > Preferences > Fonts and change the Code View Font and Font-Size. If you work with CSS stylesheets, I have discovered that changing my Code View Font to Verdana makes more pronounced curly brackets, and makes it easier to distinguish them from ordinary parentheses.
Beth -
Popup Key LOV - Can you make the text black?
Hi guys,
If I use Display as "Popup Key LOV (Displays description, returns key Value)" , this LOV selection produces a text field that is read and has perfect functionality for my application .... if only the text were black instead of grey, which is harder to read.
I've played around but had no luck. Is there any way of specifying this text as black?
NTNT,
Did you ever figure out how to fix your problem? I have the same issue.
In Firefox I can change the text color to red with - style="color:red".
This has no impact in IE though. I just want to make it look the
same as the other text on the screen. -
As you can see in the screenshot here ----> Gyazo - b048a0770df6264af1ff398951acd4f9.png I have typed a higher resolution but when I try the pixles never seen to ever go away and it increases the file size every time, is there an easier way? PS: if another adobe cc software is needed to complete this task I have every one so it doesn't have to only be in Photoshop.
The image has been reduced in size and over sharpened to the point that jaggies artifacts abound. You will not be happy with the result of interpolate the images up in size increase the number of pixels.. You need to find the original image file from the camera.
-
Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?
Turn Settings > General > Accessibility > Zoom to ON.
-
Can you make a app for texting that dont need wifi for iPod touch
Can you make a app for texting that dont need wifi for iPod touch
I don't think that even possible without any kind of connection
-
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you. -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
Can you make captions for a slideshow?
can you make captions for a slideshow? otherwise how can i rename the photo so that i can select view titles in the slideshow and use it as a caption?
Jim lo:
Welcome to the Apple Discussions. You can't make captions with iPhoto. You can edit the title of a photo by selecting it and then going to the Info window at the bottom of the Source pane, the "i" button, clicking on the title field and enter what text you'd like.
If you plan on using the slideshow in iDVD then those titles will not show as they will be lost in the "overscan" area that is common to all movies played on TV. You can create the slideshow in iMovie and have lots of control over titles and subtitles and greater control of the audio track, cut, fade in/out, etc.
Do you Twango? -
Can you display some text after you have checked a yes or no box?
Can you display some text after you have checked a yes or no box?
Ex:
Yes (Please contact Bob x3-1234) only want it to appear when you check box)
NoSure. If you use a field (button, text field) to display the text, the Mouse Up script of the Yes check box could be:
getField("button1").display = event.target.value === "Yes" ? display.visible : display.hidden;
Change "button1" to the actual name of the field and "Yes" is the export value of the Yes check box. You can use whatever you want, and you'll probably want to make the button read-only as well. -
Can i change macbook text size
can i chinge the text size.
In almost any application, you can easily change the size of the text within an application window with a simple menu command or keystroke combination. Command+ and Command- work in many apps, including most web browsers.You can't change the size of the text in menu bars or dialog boxes, or in the tool palettes and toolbars of many apps.
-
Can you calculate multiple text boxes to achieve a total value? If so how is that done? I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.
Hi sashby51,
I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
Best,
Sara
Maybe you are looking for
-
Looking for a todo app that puts new todos at the top of the list
I've been using Appigo's ToDo for several years now. It's elegant, fast, intuitive, and feature packed. One of the best things it has is the ability to drag todos around manually and their due dates change. There is one thing, however, that I wish it
-
Account 14470000 in company code 2100 is not a reconciliation account
Dear all Account 14470000 in company code 2100 is not a reconciliation account Message no. F5355 Diagnosis G/L account 14470000 in company code 2100 which is to be updated when posting to the customer or vendor is not defined as a reconciliation acco
-
Testing 4x E5-4650s and 128GB RAM - tweaks for 32-core performance?
Howdy. I've got the following system: 4x E5-4650 eight core CPUs (32 cores/64 HTs total) 16x 8GB EEC RAM - 4 sticks per CPU 2x 512GB Samsung 840 Pro SSDs 5x 3TB Hitachi HDDs in RAID5 1x GTX 670 w/ 4GB RAM Windows Server 2012 When I'm exporting 1080p
-
I tried to add a JLabel on a Panel(of Border Layout). The icon in the Label is not shown. Same problem occurs when I tried to add a JButton, I can see only the text not the icon. I tried different iconTextGap values also. The icons doesn't showup
-
Many videos and other links are blacked out, and a small message in the middle of the screen says "blocked plug-in." Is there a fix for this?