Can you make Airport Express go 5Ghz?

Hi all,
I am using FIOS at my house that runs through a Verizon router to my Airport Extreme that broadcasts wirelessly. I have also installed a Airport Express in an adjoining room to extend the network as well as to play music via Itunes.
When I am in the room with the Extreme, I get a strong signal at 5GHz. But when I am in the adjoining room I get a strong signal at 2.4GHz. I assume this is coming from the Express. My question is this; Can I set up the Express to go to 5GHz?

The issue is primarily due to the physical properties of higher vs. lower RF frequencies. The higher frequencies offer better bandwidth with a trade-off of range. In practice, the 5 GHz network is typically only useable in the same room as the wireless router providing it. It you want to provide 5 GHz networks in adjourning rooms, you may want to consider setting up a roaming network.
You can "force" the Express to extend the Extreme's 5 GHz radio, only if the following are true:
The Express must be within range of the Extreme's 5 GHz network.
The Extreme's 5 GHz network would need to have a separate Network Name.

Similar Messages

Can you switch Airport Express (g) to a new network?

I bought an Airport Express a while back (it's a g, not the new draft-n). It was hooked onto my old D-Link wireless router to extend the range. A week ago, that D-Link router gave out, and I have an ATT router. Now that the new router is in place, how do I change the settings on the Airport Express to work with the new wireless router?
Thanks for any help you guys can provide!

Hello pyroluigi. Welcome to the Apple Discussions!
Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your AT&T router can be extended wirelessly with the AirPort Express Base Station (AX).
You could; however, either configure the AX to "join an existing wireless network" for streaming iTunes and/or share a USB printer ... or connect the AX directly to the AT&T router using Ethernet and reconfigure it as a bridge.

Can you make iPhone ringtones (M4R) in Logic Express without GarageBand 08?

Can you make iPhone ringtones (M4R) in Logic Express without GarageBand 08?
If so how?
Thanks,
Ed

Not exactly ... while you can make a ringtone with any application that you would like, Soundtrack Pro 2 and Logic do not have a conversion to the ringtone format. Mv4R or something like that. GarageBand does.
I answered my own question I guess
Thanks anyway,
Ed

Macbook can't recognize Airport Express!

Hi guys,
I have a Macbook Pro Retina 15" Early 2013 running Mavericks 10.9.1. My router is the Apple Airport Express A1088 and what is happening is: I did the setup of the Airport Express last year and everything was working fine. I had to download the Airport Utility 5.6 and then I configured the Airport Express. Alright. But today, my wifi connection was not showing in my Macbook Pro, but it was working fine in my iPhone 5. I tried to turn the Airport Express off, and the same for my Macbook Airport, but it doesn't work. So I decided to do a hard reset and also a reset to factory settings. What is happening is my Macbook Pro showed only one time after doing the reset and I did all the steps of the setup using the Airport Utility 5.6. But when the airport express restarted, it was working only with my iPhone 5, not with my Macbook. So I tried to reset again to factory settings and now I can't do the setup because the Airport Express doesn't show up in my Macbook as a new base station or anything else. With my iPhone 5 I can see the Airport Express as a new base station, however I am not able to setup it because it is a old version (A1088).
I don't know why my Macbook Pro is not showing up the Airport Express. I have already tried to make it work with Windows (via virtual machine) and using Airport Utility 5.6. I also know that THIS IS NOT A HARDWARE PROBLEM! Any other network I am able to join with my Macbook.
I also looked in this forum about other users that had the same problem, but almost all of them started working after a hard reset or reset to factory settings, which is not working for me.
I just wish my Macbook to recognize the Airport Express, until yesterday everything was working fine. And today it is only working with my iPhone, but I am not able to set up it with the iPhone.
Help!
Thanks!

Hey Luis!
I am sorry - i only searched for Apple Airportutility and Mavericks to post the Link :-)
Did you already tried
- to delete your Wifi from the list of known Wifi's from your MacBook/System Prefs/Network/AirPort/Option/
- or maybe delete and reinstall the AirPort Service from your MacBook/System Prefs/Network
Cheers
Robo

Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously. My old AE allowed this but can't make the new one work that way.

In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
For Macs:
o MacStumbler
o iStumbler, or
For PCs:
o NetStumbler

Lock Airport Express in 5GHZ Mode

I am using my Airport Express 802.11N (1st Gen) as a wireless bridge between my TimeCapsule 802.11n (Living Room) and my Slingbox (Bedroom). I do not need my Airport Express to extend my network at all, just need it to act as a bridge. I have read the Express is a dual frequency device (2.5Ghz and 5Ghz), but cannot use both at the same time. Is there a way to lock my Express into only using the 5GHz frequency?

Normally, when the AirPort Express is configured to "Join" or "Extend" a wireless network, it will look at both the 2.4 GHz band and 5 GHz band and choose the best quality, or strongest signal......which is almost always going to be 2.4 GHz if the signal has to pass through any obstructions like walls or ceilings.
You can "force" the Express to connect to the 5 GHz band, but in order to do so, you must setup the Time Capsule to provide a separate name for the 5 GHz network. Once that is done, you can "point" the AirPort Express to that specific network.
But....there is no guarantee that connecting to 5 GHz will provide you with a faster connection. If the signal must pass through several obstructions to reach the Express, the 5 GHz signal may well be slower than the 2.4 GHz signal at that point.
Post back if you need more details about how to set this up. But, also keep in mind that when you give the Express the ability to choose the best quality signal....as it is doing now....it is connecting to 2.4 GHz because that is the better quality signal....and likely faster signal.

New router now can't get airport express to work

Att installed a new wireless router.
Everything else seems to be fine but can't get airport Express to communicate with My MAC. Green light on airport device. Just downloaded OX on Mac recently.
Any suggestions would be appreciated!

Reset the Express to factory and start over.. this is always required when you make major network changes.

How can I join Airport Express and 2Wire 3600HGV to extend wifi?

I to join an Airport Express to the wifi network from my AT&T 2Wire 3600HGV router to extend the wifi signal. I know it is not SOP to link an AX to a non-Apple device like this. I found instructions ( http://fsdeviations.blogspot.com/2012/09/howto-2wire-3600hgv-airport-extreme.htm l ) for joining an Airport Extreme to the 3600HGV. Has anyone used this or a similar approach with the Express to join and extend wifi from the 3600HGV?

Connect an Ethernet cable from on of the LAN <--> ports on the back of the 2-Wire modem/router to the WAN "O" port on the AirPort Express.
Power up the AirPort Express for a few minutes. The indicator light on the front of the device will be slowly blinking amber at this time.
On your Mac......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on AirPort Express
The setup utility will open up and take a minute to analyze the network, then suggest that the AirPort Express will create a new network....which is the correct setting. The window will look similar to this illustration:
For Network Name......type in the exact name of the wireless network that the 2-Wire is providing......IF.....you want to "extend" the 2-Wire network and make one "big" network. If you want to have the AirPort Express provide a different network, type in the name of the network that you want the AiPort Express to provide.
For Base Station Name....type in a device name that you want to call the AirPort Express
Password......If you want to extend the 2-Wire network, then type in the exact same password that the 2-Wire network is using. If you want the AirPort Express to provide a different network, type in a password that you want to use with the network that the AirPort Express will provide
Verify......verify the Password
Click Next, and the utility will set up everything for you automatically.
When you see the message of Setup Complete, click Done. That's it. There should be a green light on the front of the AirPort Express at this point. You can configure other AirPort Express devices in the same manner.

Can't install AirPort Express Assistant because I already have Utilities

Just having some annoying trouble here.
I have a MacBook Pro that came installed with AirPort Utilities, and it has the latest version.
I bought an AirPort Express so I could stream music to my speakers with AirTunes. I'm not hooking an ethernet cable to the airport, because my wireless already works fine in my house.
I need to install AirPort Express Assistant in order to set up the network between the express and my computer, but I can't even use the CD it came with because once I get to the part to select where I want to save it, it says "this computer already has a more recent version of AirPort on it etc..." However, I only have Utilities, not the assistant.
With the Express plugged in, I go to Utilities and it doesn't pick anything up, which makes sense. So basically, what can I do?
I tried deleting Utilities off my computer so I could just install the whole CD but even that did nothing.
Thanks.

Your version of Snow Leopard already had the latest version of AirPort Utility 5.5.1, which is the version that you should use to configure the AirPort Express.
The disk which came with the AirPort Express was produced some time ago and the version of AirPort Utility on the disk is out of date.
Not sure what you mean by Assistant. There is a guided setup process in AirPort Utility that is initiated when you click the Continue button. That may be what you are thinking of.
You made a mistake by deleting AirPort Utility 5.5.1 from your computer. You should download AirPort Utility 5.5.1 and install it so that you can configure your AirPort Express.
http://support.apple.com/kb/DL955

Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

GEESAR wrote:
hi there
is there anyway i can use the unlimited data i have from my mobile network provider (o2) on this i pod touch 4 generation the latest model NO.
and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider NO
if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
geeeeesar also how does this ipod touch4 pick up the wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of. These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants. Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for.
thanks can i pod touch 4 generation download movies too please help thank u very much.... Yes. If your iPod has a WiFi connection and you have an account with a service like NetFlix....

How can i install airport express A 1264 on os x 10.9.2

How can i install Airport Express A 1264 on os x 10.9.2

Hello chawich
All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
AirPort Utility software and firmware downloads
https://support.apple.com/kb/HT1998
Regards,
-Norm G.

Airport Utility can't find Airport Express after setting up as repeater station

I wanted to extend my 2Wire-based wireless network into a specific room that never seems to be able to pick up the signal, and found the following instructions on how to do so on Apple's website:
(note: these instructions were submitted by another user in response to a question as to whether or not an Airport Express could be used as a repeater station for non-Airport Extreme-based wireless networks - linked here http://store.apple.com/us/question/answers/product/MB321LL/A?pqid=QY4CAJJC7KFTTD KYH72DKPXF4CAUA9D4J).
Yes, you can do this two ways: If you can connect your airport express to your router via ethernet, then you will perform the following steps in the airport utility:
1. Select your airport express.
2. Select manual set up.
3. Under Wireless, select Participate in a WDS network
4. Enter your network name, radio mode, channel, and security
5. Under WDS, select WDS main
6. Check wireless clients
7. Add the MAC address of the router
8. Click update
That's it
Now, if you connect your airport express to your router wirelessly, all the steps are the same except for step 5. In this step, select WDS remote instead. Everything else is the same.
I followed those instructions exactly with my Airport Express and, after restarting, the amber light is flashing on and off continuously and the Airport Utility can't find the Airport Extreme base station. What the heck went wrong here?

Update:
I restarted the laptop I used to set up the AX as well as pushing the "reset" button on the AX (first time - pressed it for 1 second, Second Time - pressed and held for 15 seconds then let go). The Utility still isn't recognizing the base station.
I also upgraded the Utility's software to 5.5.3 right before I went through these steps, and now it's not recognizing the base station. ARGH.
Update #2: I plugged the AX into my laptop with an ethernet cable and the utility STILL can't detect it. This is ridiculous.
Update #3: Not 30 seconds after update #2, it FOUND the **** AX >.< I'm updating the firmware, but I still can't get it to work as a repeater station if I have to plug it into my laptop all the time JUST to get the Utility to recognize that yes, Virginia, there IS an Airport Extreme.
Message was edited by: bleedingrose19

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Can I use airport express in a wired network to play music through my stereo?

I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater. This works, but there are some good days and some bad days where there are dropouts in the music. I have recently run Cat6 cable to my HT from my router next to my MacPro. This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc. I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch. I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE. Is there a way to force the wifi on the AE off and just have it for streaming from iTunes? Thanks.

Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

Can you make Airport Express go 5Ghz?

Similar Messages

Maybe you are looking for