Can you make core center automatically close after being called on startup?

Can you make core center automatically close after being called on startup so it can set cpu fan speed to a slower fixed speed then exit?
If core center really cant do such a simple task then can speedfan or another program?

Quote from: bassmadrigal on 13-July-05, 07:42:36
Why don't you want them running. Speedfan has a very small footprint.
Just seems unnecesary seeming as it does its task as soon as it runs and its changes then stay applied. Speed fan is probably better but core center takes 10mb.
Quote from: syar2003 on 13-July-05, 07:57:02
You dont have to have it running to set a user specified fan rpm .
Once it's set it is stored in the corecell/cmos chip on the motherboard .(until a cmos reset) .
So to answer your question .
There is no need to have it autostarted at each boot ...
Thats how i have used it .
Only reason to have it running is with MSI's "CnQ" control of the fan , varies with the load of the processor
Thats strange for me the speed resets to default as soon as I restart my pc (about when the bios engages which is however tangibly after the graphics card fan revves up to its full speed). Depending on the temperature of the proccessor it goes to 3300rpm (less than 42c) or 4500rpm (too loud for ~45c IMO and MSIs "cool&quiet" option seems to agree, it doesn't even set it as high as 3300rpm)

Similar Messages

How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc?

Hi,
How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
What is the procedure and code to achieve it, please?
Thanks.

Hi,
I gues you are using AS2.0, then use setInterval, in AS3.0 user Timer Class.
AS2.0
var interval:Number = setInterval(doThis,10000);//in milliseconds
function doThis():Void{
//do something;
AS3.0
var timer:Timer = new Timer(10000, 1);
timer.addEventListener(TimerEvent.TIMER_COMPLETE, onTimerCompleteHandler, false, 0, true )
function onTimerCompleteHandler(event:TimerEvent):void{
//do something;
For details: http://blogs.adobe.com/pdehaan/2006/07/using_the_timer_class_in_actio.html
Warm Regards
Deepanjan Das
http://deepanjandas.wordpress.com

When opening a new tab, how can you make the cursor automatically go to the address bar?

In my previous version of firefox, the cursor would go directly to the address bar when I opened a new tab. Thus, I could start typing the web address I wanted to go to immediately. However I upgraded to Firefox 4 today and I now have to manually click in the address bar. Is there any way to change this in settings or by installing a specific add-on?
Thanks!

You only get the cursor in the search bar if you open the built-in about:home page.<br />
For other websites you need an extension.
*Custom New Tab: https://addons.mozilla.org/firefox/addon/custom-new-tab/

Can you make the Keypad the default during phone calls?...

Hi,
I'm finding it irritating when I make a call and the recording says "Press 1 for English" and unlike regular phones, I have to hit the keypad icon first just to get my numbers back so I can press '1'.
All the options are nice, but is there any way to make the Keypad the Default screen to appear while I'm making a phone call?
Also, I need to comment that I wish the speaker phone were much louder; it's almost useless the way it is. Is there any trick to getting that louder besides the volume control on the outside of the iPhone?
Many Thanks, Frank B.

All the options are nice, but is there any way to make the Keypad the Default screen to appear while I'm making a phone call?
In a word, no.
Also, I need to comment that I wish the speaker phone were much louder; it's almost useless the way it is. Is there any trick to getting that louder besides the volume control on the outside of the iPhone?
Same answer - no but here is Apple's feedback link for the iPhone.
http://www.apple.com/feedback/iphone.html

Can I make Skype quit automatically when I close i...

I'm sick of having to close it on the task bar and then confirm I don't want it running any more.
I've already confirmed I wanted to log out and close the program, why is it still running?
I cannot find an option to quit from the menu whilst running, but I imaging it's buried somewhere.
Could somebldy tell me how to either 'quit' automatically when I close the program, or if there is an option to close and quit while it's open?
Failing that could I find out why it's do ******* important that it stays running in the backlground after I close it the first time?
Solved!
Go to Solution.

This screenshot (http://community.skype.com/t5/Windows-desktop-client/Can-I-make-Skype-quit-automatically-when-I-clos... is from the currently latest Skype 6.7.0.102 version, but exactly the same window is shown with any previous version too.
If you sign out of Skype before quitting, then the “Do not ask me again” option will not be shown. You don’t need to sign out before quitting!!!!

I-photo has been working brilliantly until after my last update. Now it automatically closes after 10 seconds. The warning box appears but offers no solution. I have reloaded the software, but this has made no difference. Has anyone else experienced this

I am having problems with i-photo. It automatically closes after 10 seconds. the warning box gives no guidance. Anyone else had this problem?

What "warning box"?
Assuming you're using iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Do you have to down load from the internet using apple's recover partition, every time you need to do a clean install? or can you make a copy of Mt Lion onto a USB stick and install off that?

Do you have to down load Mountain Lion from the internet every time you need to do a clean install? or can you make a copy of Mt Lion onto a USB stick and install off that?
Thanks

Yes you can make a USB stick of Lion or Mt Lion. Use Lion Disk Maker after you download OS X from the internet.
For Lion you have to point the download to an external drive and watch when it completes and reboots the system to start the install disconnect the external. If you bought Mt Lion from the Mac App Store then you can download it from there and just cancel the install when it comes up on the desktop.
If you are downloading from the Recovery HD or from the Online Internet Recovery system, slightly different then the built in Recovery HD, then again you need to point it to an external drive and discoonect that drive when the system reboots to start the real install.
Then use Lion disk maker to create either a DVD disc or USB thumb of the install files.

How can you make your persona show on the top and bottom? Also can you make it bigger at the top to show more of the picture?

How can you make your persona show on the top and bottom?
Also can you make it bigger at the top to show more of the picture?

Add extra empty toolbars if you want to see more of the persona.<br />
You can create extra toolbars to get extra space via View > Toolbars > Customize<br />
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.<br />
See http://kb.mozillazine.org/Toolbar_customization

How can I make the ipod stop itself after playing one song?

How can I make the ipod stop itself after playing one song?

When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
If not, tap the center of the page once to expose them
now keep tapping the circle on the left part of the exposed controls untill a one (1) appears...

Form automatically close after receiving a specific number of submissions?

Hello,
I am using the form as a registration tool for an upcoming event. How do I get the form to automatically close after receiving a specified number of submissions? There are only 15 spots and 700+ folks may see the form. I need for only the first 15 to have access to the form. Thanks.

We don't currently have an automatic way to close a form after a set number of submission. You would have to watch for submission and close the form manually.
Andrew

How can i make firefox reload automaticly every hour?!!!

how can i make firefox reload automaticly every hour?!!!
I download add-ons Reload Every
how to manage it((setting))?!!!
thanks addvance>>

You installed the ReloadEvery Extension rather and not downloaded it to disk.
To set the reload time for the tab you are viewing you can right-click the page and select a time.
http://reloadevery.mozdev.org/
http://reloadevery.mozdev.org/screenshots.html

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?

Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?

Turn Settings > General > Accessibility > Zoom to ON.

How can I make a survey automatically identify the user in the results?

How can I make a survey automatically identify the user in the results (so that it won't be anonymous)?

I am not sure what information to provide. Here is what I am trying to do. I am trying to create an HR questionnaire with multiple choice questions and several multiline textboxes to capture comments. I want to send it out by email address and/or embed the questionnaire somewhere on the company's intranet website. But we don't want the questionnaire to be anonymous. If someone makes a particular comment, we want to be able to communicate with the person who made that particular comment. How would we be able to trace the person? By email address, or by user ID?

Can you make core center automatically close after being called on startup?

Similar Messages

Maybe you are looking for