Can you mask a field value based on another?

In XML publisher, is it possible to not display field values based on a value from another field? If so, how can this be accomplished?
For example, I have a field value for Address Line 1 as "123 Main Street". I don't want the City, State, Zip, County and Country to be be displayed in the pdf output. However, all other Address Line 1 values should be displayed.
Thanks in advance,
-joe

PLD is a very basic tool. The goal you try to achieve may not be available as I know of.
Thanks,
Gordon

Similar Messages

Can you make a field expand based on characters in a PLD

Is there a way to have the City on a PLD expand based upon the characters so the State field is not so far away?
On the checks when you have the address area, it has a huge gap between the two fields. We do not use the address field as the block area causes a space so we have separate fields for the address.
Thanks

PLD is a very basic tool. The goal you try to achieve may not be available as I know of.
Thanks,
Gordon

Set lookup field value based on another lookup field using Infopath 2010 rules

Hello,
I created 3 lists in SharePoint 2010: Lists A, B and C. The lists B and C where create to work as a drop-down fields in List A. My question: How to I set field C automatically based on what is selected on field B using Rules in Infopath 2010?
I don't know what to put in the third field:
Thanks,
Elvis

It looks like you edited the question since you first asked it. When I posted my first answer, there were no screenshots in your question and it was not easy to figure out what you want to achieve.
I asked for clarification. You did not reply to my post.
Instead it seems that you edited your question and added more detail. This is good, because it helps people to understand what you are asking.
But when you change a post (YOUR QUESTION) that others have already replied to, you must acknowledge these replies and let people know that you are posting new information.
In this forum, people get emails when there are new replies to a question. That's how I found back to this thread. I do not get an email if you edit your question to add more information.
So, don't be surprised if you edit your question and people still don't respond. The people why have already replied to your question will not be notified if you make changes to your original question.
If you want to make sure that everybody who is interested in your question gets notified about new information, please add the information in a new comment to the question, or edit the question and then post a new comment "I added more details".
This way, everybody already subscribed to your question will be notified about the new content and can help you find a solution.
cheers, teylyn

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

Can we change key field values in table maintenance

Hi,
I have created Z-table and table maintenance for the same...
In table maintenance..Can we change key field values??
Is there any posibility????
Rayudu

you can do it in this way.
open sm30->tablname->edit
snow select the row(s)->copy->change the keyfield values-back->save.
no in that sm30, select records with old primary key and delete->save.
so you got all field similar for those record under modification, only the key field changed.

Can you find the fields

hi all
please can you find the fields from which table.These are the fields
PUR.ORG
PUR.GROUP
TOTAL NET PRICE.
P.O NUMBER.
ITEM NO.
MAT.NO.
MATERIAL DES.
ORDER QTY.
NET PRICE.

Hi Kiran,
Check tables EKKO and EKPO to get the above fields.
PUR.ORG - EKKO-EKORG
PUR.GROUP - EKKO-EKGRP
TOTAL NET PRICE - EKPO-NETWR
P.O NUMBER. - EKKO-EBELN
ITEM NO. - EKPO-EBELP
MAT.NO. - EKPO-MATNR
MATERIAL DES. -
ORDER QTY. - EKPO-MENGE
NET PRICE. - EKPO-NETPR
Thanks,
Vinay

How to Handle Blank Field Value based Condition in SmartForms

Dear Sir,
In SMARTFORM , we need to define a Condition that incase Field Value is not equal to BLANK value (blank means that field is empty) then a specific text gets printed .
Our problem is that We do not know as how to define Empty Field Value based condition .
Had it been Non Empty Field value based condition then solution was simple and could be done in following way :
Field Value R Comparision Value
WA_KZDKZ = 'X'
In our case , we need to give Blank (Empty Value) instead of 'X' .
Kindly help us pl .
Rgds
B Mittal

Hi,
To handle blank field values in SMARTFORMS,
Go to the conditions tab in your SMARTFORM and give condition there
Field Comparision operator value
<Field name> <> Here symbol is diff space.
eg:
wa_mara-matnr =/ space.
Regards,
Santosh Kumar M.

Can you pass a hidden value along with your select option in the form selec

Can you pass a hidden value along with your select option in the html form select

Off topic. Locking.

Can you hide a dimension value but display one of it's attributes?

Can you hide a dimension value but display one of it's attributes in a query output?

Hi Prakash,
I assume you are referring to a characteristic ('dimension').
This is possible: If the attribute is a navigational attribute you can include it in the query definition without the 'parent' char.
If the attribute is a Display attr then you can try by setting the Display property of the parent char to No Display (right click the char in the query > Properties)
Hope this helps...

Making a DFF field mandatory based on another field

Hello All,
We have a requirement where in we need to make a DFF field mandatory based on another field.
example:
DFF has two fields :
Filed1 : values 'Email', 'Fax'
Filed2
If 'Email' is selected in 'Field1' then Field2 should become mandatory.
Any inputs on this will be really helpful.
Thanks & Regards,
Satya.

hi kumar3a,
recently, i spent considerable amount of time wracking my brain on a similar problem. the nearest i came to a solution was when i used a forms personalisation. mind you, forms personalisation will not work directly on the DFF window, so it has to be approached in a roundabout sort of way.
i got this information from an Oracle Support personnel - MOS Note 1078348.1.
i would start with the flexfield segment as "not required", and then using Forms Personalization, i would make it "required". i would try to figure out how to establish a condition where the previous 'required' flexfield segment's value is checked to see if this 'not required' segment needs to be made 'required'. in theory, this should solve the issue. i gave up on it because the forms personalisation would need to cover WHEN-VALIDATE trigger event, and we had close to 100 validations going on through other preexisting forms personalisations, which rendered it near impossible to employ this method.
best regards.

Can you transfer music from one ipad to another

can you transfer music from one ipad to another??

Are you trying to share music with a friend or are you putting music from an old ipad to a new one?

Can you move photos from one album to another on IPAD3

can you move photos from one album to another on an IPAD 3

These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
 Cheers, Tom

How can you transfer data from one ipod to another ?

How can you transfer data from one ipod to another ipod ?

The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device." Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

HT1751 Can you share or lend a book to another iPad.

Can you share or lend an iBook with another iPad?

Are you and your office manager using exactly the same version of Snow Leopard?
Ernie

Change column value based on another

Hi, everyone.
my version 11.1.2.2.0.
i wanna change 1 column's value based on another column's value that be selected.
ex: select 2rd column to 'A' , then the 1rd should be 'New Start'.
i used EL like #{row.bindings.MacdType.inputValue eq 1 ? 'New Start' : row.bindings.CircuitId.inputValue}.
But it does not set the inputvalue which should binding with the DataSource.
what's the best way to do these logic?
pls help. thx

Hi,Abhijit;
ex: the frist column is a LOV, the user select "A" for the first column, so the value of the second column should be changed to 'New Start'.
And the value should be binding to the DC, when save, the value of the 2rd column should be saved to DB.
thx

Can you mask a field value based on another?

Similar Messages

Maybe you are looking for