Can you Open Html in Flash?

Such as in a frame , kind of like in an iframe
say after an animation , the iframe or whatever would move out and open the html page inside?

flash supports a very limited number of html tags so, loading html into flash is generally unsatisfactory.
you can either limit yourself to those supported tags or open the html in a browser window that's either the same or different than the one that displays your swf.

Similar Messages

  • Can you open the older Flash 8 .fla in CS4?

    Hey need to know if you can open an older Flash 8 .fla file in Flash CS4?.......bc I am going to have to download a trial CS4....in order to open this file....I currently have an even older version MX.....and I cannot open version 8.........this file was sent to me to edit it.......and I am getting the "unexpected file format" message........So my intent was to download the 30 day trial for now......just so I  can updated it as needed....Need to do this right away....
    Please respond!
    Web Dev Girl

    yes, you wont be able to back track and flash will give you a warning when saving to remind you about the version change

  • "You can't open the application "Flash" because it is not support on the architecture"

    Looking for some help with this.
    I recently had a system corruption on the MAC machine here in my office.
    The user was suppose to save his work to the servers which they didn't.
    The users that was using the Mac ended up losing all there data as the hard drive failed.
    As a precaution I decided when I was rebuilding the MAC to replace the dead 250MB hard drive with 2x1TB hard drives.
    I would then create a RAID1 (Mirror) with the two hard drive so if a single drive fails the users can continue to work without interruptions or losing any work.
    Mac installation went without an issues. Then the Adobe installation appears to go okay, however as I was double-checking the installs for the Flash and Indesign programs were grayed out wiht that no smoking sign symbol on them. When attempting to run the programs all I recieved was the following Error:
    "You can't open the application "Adobe InDesign CS4" because it is not support on the architecture"
    or
    "You can't open the application "Flash" because it is not support on the architecture"
    All other programs for the CS4 open and run without any issues.  The CDs I have are for a multi-user license.
    System spec are:
    Model Name:                             Mac Pro
      Model Identifier:                      MacPro3,1
      Processor Name:                      Quad-Core Intel Xeon
      Processor Speed:                      2.8 GHz
      Number Of Processors:            2
      Total Number Of Cores:          8
      L2 Cache (per processor):        12 MB
      Memory:                                  8 GB
      Bus Speed:                               1.6 GHz
      Boot ROM Version:                 MP31.006C.B05
      SMC Version:                          1.25f4
    Does anyone have a solution?

    The usual reason for that error is that the application isn't installed. As for why they didn't install, that I can't tell you.
    Bob

  • Open html inside flash it´s posible?

    open html inside flash it´s posible?

    I've been trying to create a link in flash8, to link to an
    html page the whole week, no success at all. I dont think anyone in
    this
    forum's got any answer to that. When I run the swf file alone
    it works but as soon as I import it into Dreamweaver, all links to
    an html file created in flash fails.But if by any chance you get
    the answer please would u send it to this emall address:
    [email protected]

  • After Installing Flash Player 9, i can't open anything with Flash

    After ungrading to Adobe Flash Player 9, i can't open
    anything with flash on any of my browsers (Safari, IE)
    and it just keeps on running in circles...like it tells me to
    go to the download page and then i would download it and install
    the software, but after installation, it directs me to the
    macromedia pages and it says:
    "The page “Macromedia - Flash Player” has content
    of MIME type “application/x-shockwave-flash”, but you
    don’t have a plug-in installed for this MIME type. A plug-in
    should be available on this page:
    https://www.macromedia.com/go/getflashplayer
    Do you want to open the page?"
    and when i open the page. it's just the page where I
    downloaded the Flash Player...
    it just keeps going back in circles after i've done it like 8
    times already!
    URGGHHH!!!! help!
    now i can't open anything with flash on the page!!!!
    and just any webpage with flash movies...it would just say
    that "either your javascript is turned off or you do not have flash
    player installed" something like that!!!! SOOO ANNOYING!
    and there isn't any help on the forum at all!!!!
    anyways. i'm with Mac OS X 10.3.9 on a PowerPC Powerbook
    G4

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • Can you open files on a pc from time machine?

    Can you open files on a pc from time machine?

    You have to be more descriptive. Partition what?
    File sharing can be accomplished many ways,.
    Network
    Usb flash drive
    External hard drive
    NAS
    DVDs
    It is as simple as copying/saving from one computer/drive to another computer/drive.

  • How many Iphone 5 can you open under one account ??

    Just a simple question , how many iphone 5 can you open under one account ? is it 5 or more ??? anyone know . I've been a verizon customer for a little bit over 5 months ..... any input ??? thank you

    I'd call Customer Service and ask, because the Share Everything plan is supposed to allow 10 lines:
    http://support.verizonwireless.com/clc/faqs/Calling%20Plans/share_everything.html

  • Can you open word doc. In pages? (Opening a doc. From the web) in the iPad or iPod tuch?

    Can you open word doc. In pages? (Opening a doc. From the web) in the iPad or iPod tuch?

    NH,
    This may seem a fine point, but iWork apps don't actually Open Office apps. They Import them. The reason I make this distinction for you is that when you view the result of the import, you may see some variations from what was in the Office document because of an imperfect translation, and when you make edits, you are editing an iWork document, not the original Office document.
    Jerry

  • Can you open with Pages documents that were created in a 2004 version of Microsoft word for Mac?

    Can you open in Pages documents that were created in a 2004 version of Microsoft Word for Mac?

    Pages '09 will open .doc files from Word 2004. The Mac OS is not what is in question. Pages '09 opens Word 2004 documents and if the same version of Pages will run in Lion and in Mountain Lion ..... Thats all that matters.
    I trust you were using MS Office 2004 and would now like to buy Pages?

  • Can you open freehand files in CS6?

    can you open freehand files in CS6? I have been using both illustrator & freehand for 15 years & have thousands of work files being freehand.
    It seems very disappointing to have to keep an old version of illustrator just to open these files. I also find it interesting that many of the key tools that freehand had over illustrator are not translated into the newer versions of illustrator. Something simple like you still can't have a unique picture bullet • before text in illustrator. In freehand you could cut & paste any graphic into the text you were designing.

    saturn234 wrote:
    can you open freehand files in CS6? I have been using both illustrator & freehand for 15 years & have thousands of work files being freehand.
    No. The conversion plugin didn't make it into CS6 so the last import function was CS5.5 
    It seems very disappointing to have to keep an old version of illustrator just to open these files.
    At this point, it is the only way to make your files convert into Illustrator although I've had some luck with exporting to EPS or (if your FH graphics are simple enough) save as AI format. Keep your eyes on this project however : http://www.stagestack.com/
    I also find it interesting that many of the key tools that freehand had over illustrator are not translated into the newer versions of illustrator. Something simple like you still can't have a unique picture bullet • before text in illustrator. In freehand you could cut & paste any graphic into the text you were designing.
    As a fellow FreeHand user, I couldn't agree more. Other users of both programs have said this endlessly over the years here. A litany of features are still m.i.a. since FHMX was acquired years ago... including inline graphics. It's almost comical.

  • Can you open a word document in pages 08

    Quick question however stupid it is
    can you open a word document from a pc in pages 08?
    sorry in advance if i have posted this in the wrong discussion area
    cheers
    Message was edited by: Lama323

    The answer is as above wrote yes. Does it do it perfectly, the answer is no. Opening a .doc/.docx in Pages'08 will generate a frame warning message I find. I find text and symbols are preserved well, but formatting is not perfect. An example of my own is in the screenshot below. Same page 28 on a .docx but formatting of the document is not exactly preserved as you can clearly see. Where preservation of formatting is critical Pages is good, but not perfect alternative to Word '08.
    http://img225.imageshack.us/img225/2461/docxcu2.png

  • How can you open photos in adobe reader x

    How can you open photos in adobe reader x

    You can't - Adobe Reader will only open PDF files.

  • Can you open a Final Cut Pro project file (6.0.6) in Final Cut Express (v4)

    I am working on a project in Final Cut Pro (v 6.0.6) and I need to pass it off to a colleague who only has Final Cut Express (v 4). The media in the project is DVNTSC.
    I went to the Apple store at the Stonestown Mall in San Francisco today and they assured me that my colleague would be able to open my FCP project file in his FCE program... but I'm skeptical.
    Can you really open a FCP project file in FCE?
    Could somebody who has both confirm this for me?
    Thanks,
    Sam

    Under very rare circumstances can you open an FCP project in FCE. It almost never works and is not supported by Apple.

  • Can you open a Microsoft office powerpoint document on an iPad?

    can you open a Microsoft office powerpoint document on an iPad?

    You should be able to preview it if it was sent to the iPad as an email.
    Or you can purchase Keynote for the iPad, which knows how to open PowerPoint.

  • Can you open panasonic tz60 raw files in elements 12

    can you open Panasonic TZ60 raw files in elements 12

    Yes. Go to Expert Mode and from the top menu click:
    Help >> Updates
    Install camera raw 8.5

Maybe you are looking for

  • Web Report not working on a different machine

    Dear Experts, I published my bex reports in Web. Url's works fine on my machine, but if I check the same Url on any other machine it gives a message 'page cannot be displayed'. How can all the users view the reports on web? How sould I publish them?

  • How to reference a specific page of indesign file with xml

    Hi, I have a project that will produce many indesign files and what I want to do is use xml to build them. The main issue is that one of the source files will be in indesign. So what I need to find out is how do you specify attributes for page 2 of a

  • Photoshop will not open some of my files

    I recently had a hard drive crash. I sent it to a recovery company and they returned my files on a new hard drive. Many of the images were recovered but some show up as CR2 files or psd files that photoshop will not open. The message says that this i

  • Flat file to Asynch RFC: R3 not getting updated

    hi all,          I have a flat file to asynch RFC scenario.I can see the file getting deleted and the chequered flag in MONI.In adapter monitoring i can see the message being processed for the RFC.But it has to update an R3 table which is not getting

  • Will my WPC11 v2.5 pick up the signal from my new WRT160N router?

    I have my new router working but my laptop does not see the wireless network. Will my old card work with this new router, and if so do I have to do something special to make work?