Can you pass a local file address to be opened when firefox is started?

I want to view an html file edited in Bluefish. Bluefish provides several start commands for browsers, but does not include one for firefox. I tried "firefox %s&" but that had no effect.

thanks cor-el, no luck with %u
every other browser supports this, so you'd think it could be done somehow

Similar Messages

  • Download file opens when Firefox is started

    I just reinstalled Firefox on my Mac. Now whenever I open the program the download .dmg file pops up on my desktop and the dialog box where I needed to drag the firefox icon into my Applications folder pops up as well. Firefox starts and works fine, but it is annoying to have these two other things pop up on my desktop as well. What do I do to get rid of these things?

    Make sure that Firefox gets installed properly.
    Open the Firefox disk image (DMG) file and drag the Firefox program to the application folder on your hard drive.<br />
    You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
    *https://support.mozilla.org/kb/Installing+Firefox+on+Mac
    *http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

  • Since upgrading to windows 8.1 I can not see any local files in the files window.

    I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
    If I change sites under local view get error thet dreamweaver can not update cache

    Thanks Nancy
    It certainly worked in windows 8.
    I have deactivated and am trying to reload software inside of windows 8.1.
    Will let you know.
    Thanks again
    Terry
    Date: Fri, 1 Nov 2013 12:13:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
        Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    I honestly don't know if DW CS5 is compatible with Win 8.1.  The OS compatibility FAQ only mentions DW CS6 & CC.
    http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
    Maybe someone else can shed more light on this.
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to pass the local file name to the workflow in TC OAWD

    Hi everybody!
    I have to pass the local file name of the image as a parameter to a workflow in TC OAWD.
    By debugging I found the FM which starts the workflow -  'ARCHIV_PROCESS_FAXINPUT' . It has two importing parameters : FRONTENDPATH and BASICFILENAME, but they are not used by calling the FM.
    Do you have an idea if there is a DDIC table, which contains the local file name or another way to solve the issue.
    Thank you in advance.

    Hi,
    Not sure of what you want.
    Have a look at v$session view. Machine column is maybe what you're looking for.
    If you want to retrieve the local host executing remote desktop, it's actually not possible natievely, since it's still remote host that is connecting to the database.
    Hope it helps.

  • Can you have a local variable to handle wfm information?

    I am very new to test stand. Can you have a local variable to handle wfm information?
    Also how do you use parameters? Do you need to have a parameter of the same name in the main sequence and subsequence?
    Thanks,
    Brian
    Electrical Engineer
    L3 Communication

    Hi Brian
    Parameters are one way you can pass data from a calling sequence to a subsequence. From the main sequence, right-click on your subsequence and select "Specify Module...". In the "Parameters" section of the dialog box, you should see any parameters that you have for your subsequence. You can then assign these subsequence parameters to have the same value as a parameter from the calling sequence, a local variable from the calling sequence, a constant, etc. In regards to your question about naming parameters, you do not need to have parameters of the same name in both the calling sequence and the subsequence, although you could have them be the same name.
    Russell G.
    NI Applications Engineering

  • HOW CAN YOU PROCESS AN AUDIO FILE IN LABVIEW?I NEED TO TIME-PITCH SCALE IT

    hello guys.
    can you insert an audio file into labview for further processing?i need to get an audio file (stored on my computer) and further process it for time-pitch scale.does anybody know how?any pointers will much be appreciated.
    regards
    alex

    hi there
    open the "Graphics & Sound" palette from the functions menu to use vis for reading/Writing wavefiles, search the examples shipped with LV for first steps. use the VIs in the "Analyze" functions palette to modify the data.
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How long can you share a folio file for and how many people simultaneously

    Hi There,
    Questions per above title, can you share a folio file via the content viewer for an unlimited time?  How many people could you share it with simultaneously?
    As well I am trying to understand do you have to pay for DPS (and if so can it just be the single version) to be able to share a .folio file through the content viewer.  Can you just have in design 5.5+.
    In addition, if the .folio file is set up for Ipad distribution when shared will it be formatted and fully usable/interactive through the content viewer by the person you are showing it to on the ipad?
    Any help is appreciated.

    You do not need to pay to share a folio file via the content viewer.
    I'm not aware of any limits on how long a folio can be shared to, or how many e-mails a folio can be shared to.
    And yes, on the interactivity question.

  • How can you tell if a file is being used in your project or not?

    How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
    In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
    Can FCP tell me this info?
    Thanks for yout time!
    -Monty

    Monty,
    Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
    For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
    Do a google search. I was just watching a few Youtube videos on this myself.
    Jonathan

  • Can you export a raw file photo with Lightroom adjustments attached?

    Can you export a raw file photo from Lightroom with Lightroom adjustments attached in some way?  If not what is the equivalent?  There are some individuals I would like to send the full data of the raw file, but with the non-destructive Lightroom adjustments layered on top.
    --Gerry 

    You can select "Original" as the file type, in Export. This saves out a copy of the imported source file into the selected location, labelling the current adjustments onto that image. When this is sent to somebody and imported to LR / opened in ACR, these metadata will be found and used automatically, with the exact same outcome as within your own LR Catalog - provided the LR / ACR versions are sufficiently compatible, and provided camera and lens profiles applied to the image, are present in both contexts.
    LR uses whatever method is normal when writing metadata, for each file type involved. So, if one imported file is a proprietary Raw file, LR will write an XMP file alongside. If another is capable of having metadata written into its file header, LR will do that instead.
    One important difference between doing this, vs writing LR metadata out to your original imported file, and sending that: the Export Original method will work in the same way, just as successfully, for one or more Virtual Copy versions (duplicating physically as needed), as it will for the primary Master version - relating to a given imported file.

  • Can you rename backed up files on time capsule?

    Can you rename backed up file on time capsule?

    You can rename the sparsebundle file that Time Machine has used for the backups of a Mac on a Time Capsule.....if that is what you are asking......just like you can rename any file on a Mac.

  • Can you create a .ics file from entries in a PDF?

    Hi,
    I'm wondering if anyone can help me: Can you create a .ics file from entries in PDF?
    Example:
    I'm wanting people to be able to choose a number of dates for some events within a PDF, then click a button that will then create a (or number of) .ics files so they can add those dates to the calendar of their choice. Is this possible?
    Thanks

    Using the solution supplied by Leonia, and cited by Keith, you can do the same thing (flopping the Curve profiles) in LightRoom. So, it makes sense. Though I didn't know know it worked for Color Negatives.
    A friend of mine with a Nikon Coolscan is going to scan nearly 150 B&W rolls of 35mm negatives for me, and I want to import them all into Aperture, naming and keywording as I go. The objective is, of course, to have the convenience of a diigtal library. But also to have some made into large prints for framing.

  • Can you pass a hidden value along with your select option in the form selec

    Can you pass a hidden value along with your select option in the html form select

    Off topic. Locking.

  • Can you save an mp3 file that you receive as an attachment to an email?

    Can you save an mp3 file you receive as an attachment to an email?

    Irwinwilliam-
    With other attachments, you can press and hold on the attachment icon.  One of the options that may appear is "Open In".  Choosing that, any App that is capable of reading the attachment should show up as a choice.  When opening the document that way, a copy is transferred to the App.  I have not tried with an MP3 file.
    For MP3, I think the Music App should be a choice.  If so, the file should then appear with your other music.
    If an inappropriate App appears in "Open In", you may be able to use it as a conduit to transfer the attachment to your computer.  Run iTunes on your computer with the iPad connected.  Select the iPad under DEVICES, and click on Apps at the top of the window.  Scroll down to File Sharing and select that App.  If successful, your document will appear to the right in the Documents window, where you can select it and Save As.
    Fred

  • Can you download raw image files to iPad2?

    Can you download raw image files from a compact flash card onto iPad2?

    According to this:
    It supports raw, but I am suspicious, since it does not state *which* raws it supports...
    http://support.apple.com/kb/SP580

  • How can you restore your backup files from time machine?

    Hi how can you restore your backup files on your mac book pro from time machine? i lost all my pic and files on my phone and then restored it from the last back up which was when i lost all my files i dont know what i did? someone please help!
    Thank You
    Jon

    YOu might get more info if you post in the MAC forum.

Maybe you are looking for