Can you play the guitar program and also run a keyboard at the same time using seperate outputs for both?

I wanted to be able to play live on my electric guitar using mainstage and my keyboard player to use mainstage on the keyboard can this be done using the mainstage 2 on this computer? Also if this can be done can you send the keyboard output and the guitar output seperatly to be able to be in different channels in the PA system?

Hi
Spatrick79 wrote:
I wanted to be able to play live on my electric guitar using mainstage and my keyboard player to use mainstage on the keyboard can this be done using the mainstage 2 on this computer?
Short answer: YES (but you will need to carefully consider how you organise your Patches with Guitar and Keys combinations, so that you both get the correct sounds at the same time)
Spatrick79 wrote:
Also if this can be done can you send the keyboard output and the guitar output seperatly to be able to be in different channels in the PA system?
Yes, ideally using a multi-output audio interface. edit (with 2 outs for the guitar, and 2 for keys... you might also want another 2 pairs for monitoring)
CCT

Similar Messages

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now.

I recently purchase an ipad2. I also have a mac laptop. Now, when I facetime call using my iphone to my ipad2 or mac, it states busy. how can i fix this problem? I have the same apple id e mail for both ipad2 and mac. it might be getting confuse now. I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling. Thanks.

thanks. your answer was correct, clearer. I have another question, maybe you can answer. I just purchase my ipad2 2 days ago. yesterday, there was a sound. today there is no sound. there is a sound only in movies and you tube and music. but no sound on all apps and keyboards. I look it up and seems like ther are few that have this problem. I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that. I tried rebooting it and still won't work. Should I just restore it?

Can you play 2 songs at the same time using itunes?

I would like to put music under my audio books and my question is "can you play 2 songs at the same time using itunes?"

I am not aware of a way to play two songs at once in iTunes. However, at least on a Mac, you can definitely open and play multiple things in QuickTime player. Sooo, you could open a music file in QT Player then start it and start the audio book in iTunes. Or open the audio book in QT player and listen to that there while iTunes plays music.
Patrick

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library???

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library??? All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found" How can we merge them?? or how can we share all songs.. purchased or not!

When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library??? All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found" How can we merge them?? or how can we share all songs.. purchased or not!

Can you download the same film twice with the same itunes account

can you download the same film twice with the same itunes account

It depends upon which region you are in and the current policy of the copyright holder. Sometimes individual items are exemept even though repeat downloads are generally supported. Any purchased item could be removed from the store in future so you should really maintain your own backup.
See iTunes in the Cloud and iTunes Match Availability.
tt2

HT204053 If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad

If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?

She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

How to clone 40 mac mini at the same time using network clone (like Ghost)

how to clone 40 mac mini at the same time using network clone (like Ghost)
Any Ideas ?
Thanks

Rather than a 100% identical clone to 40 Macs, I suspect you want the same basic image to be loaded on to those 40 Macs but will require some individualisation so that for example each has a unique computer name.
NetRestore and System Imaging Utility can do this but a lot of people including myself prefer to use DeployStudio which has more capabilities. See http://www.deploystudio.com
DeployStudio can be used to like NetRestore to restore an image to multiple Macs at the same time which is like multiple people downloading at the same time, but it can unlike the standard NetRestore also be configured to use multicast traffic which is more like a TV broadcast whereby multiple people receive the same transmission at the same time. This can be more efficient for imaging larger numbers of computers at the same time. For example 1Gbps shared between 40 computers is only 25.6Mbps each, but if you multicast a single transmission of 100Mbps to 40 computers then all 40 can listen to it at the same time and still be receiving 100Mbps even on the same network connection.

Can you play music to wireless and wired speakers at the same time?

If you have Airport express, can you play music on speakers plugged into the airport express at the same time as you play from speakers attached to your computer?
Thanks

Yes you can. In the bottom right hand corner of the iTunes main window there is a drop down menu. Select the AirPort Express base station(s) you'd like to send your music to and also select 'Computer'. Not only will it play through all, it will play IN SYNC!
I can't remember with which version of iTunes this was introduced, best to grab the latest version to be sure.

Recording vocals and guitar at the same time, using the Alesis IO dock!

Hi there!
I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
Hope someone can help :)

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

How do I read and write at the same time using the NI-CAN channel API?

Here's the situation. I have one CAN bus, and I need to read and write channel data (using the channel API) at the same time both at an interval of 20 ms. It's easy to do one or the other using the channel API, but you can't setup a channel task to do both. It's either input or output, not both. Is this even possible?

Hi,
yes , this is possible. But you have to create two tasks, one for input and one for output. see the attached example for LabVIEW.
If you download and install NI-CAN 2.4 you will get this example and one for C and VB as well.
DirkW
Attachments:
Single Sample Input Output same Port.vi ‏79 KB

CSM route mode and bridge mode can exist at the same time?

I'm using CSM on ver 4.x,and I used to the bridge mode for firewall load balance,for a new requset,I have to create a new server/client vlan,but the original firewall load balance was effected when I issued the server vlan command,and I'd like to use route mode for the new server farm,I'm wondering that route mode and brige mode can't exist at the same time,because it seems it doesn't make sense.Any reply will be very appreciated.

you can use bridge mode and route mode at the same time.
Traffic with desintation mac address being the CSM will be routed, otherwise it will be bridged.
Gilles.

How can i connect to a LAN and external display at the same time using the mini-displayport?

Hi all,
At work i'm connected to the Lan via an adapter and the mini displayport. I want to use my external display at the same time, which use the same mini displayport. Are there any splitters available to use both at the same time? Are there any other alternatives?
Thanks,
Dennis

There are USB to ethernet dongles:
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?afid=p219 %7CGOUS&cid=AOS-US-KWG-PLA

How can I get the Elapsed Time express to output in milliseconds?

I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
Thanks in advance!

I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
Attachments:
Example_VI.png ‏4 KB

Can I have two projects open on Premiere Elements at the same time? (Elements 13 for Windows)

Hi there.
Can I have two projects open on Premiere Elements at the same time?
The reason I wanna do this is because I've trimmed many hours of clips in one project (One timeline) and I want to start a new project where I have a "clean" timeline and can add clips from the
first project (Cut and paste). Or how do I bring a trimmed clip from one project into another in a easy way?
Thanks
-Dan-

Your question is in the Photoshop Elements forum. There is another forum for Premier Elements and this will probably be moved.
That said, the answer is that Premier Elements has not be designed with the ability to cut and paste from one project to another. The only "work around" is to "Publish&Share" to a best quality format that matches your project settings. You can control the output clips with the "work area bars". You can then add the new clip to the second project. The output rendering process can, at least in theory, reduce the picture quality. Depending on formats, settings and footage, it may not be noticeable.
There is a third party product called Clipmate that some say works, but not always with good results.

Can you play the guitar program and also run a keyboard at the same time using seperate outputs for both?

Similar Messages

Maybe you are looking for