Can you please fix your browser's tab issue? (I've switched over to Chrome)

Can you please fix your browser's tab issue? (I've switched over to Chrome until this issue has been resolved)
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6

What issues do you have with Tabs in Firefox?

Similar Messages

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone)

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone) so that person can find their iPad coz the police would of taken mine if I did not show proof of purchase

You are not communicating with Apple by posting here. Everyone here is just a fellow user and cannot fix anything.
The Find My iPad service may have indeed been accurate to the limits of the technology. Unless the iPad was a 3G unit, location is determined based on the nearest WiFi router which in your case could just happened to have been yours. The police may be the ones who need to "fix" their understanding of how the technology works and its limitations.
If you want to provide feedback to Apple on the matter, you can do so via their feedback pages:
http://www.apple.com/feedback/ipad.html
but to be of any good you'll have to provide them with more precise details.
Regards.

My scroll feature of the Lenovo ThinkPad(red scroll) is not working in the new Firefox 4. It was working fine in 3.6. Can you please fix this as this is very important feature.

The scroll feature(middle button) is not working on the new firefox 4. So because of this I need to move the scroll bar to move the page. This is very irritating problem, if you are a guy who uses the middle button to scroll. Can you please fix this..
Thanks!!!

I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again.

HT1848 I don't know if you all realize but iTunes has been updated more than five times so can you please update your information on how to transfer apps form a IOS device to iTunes please

I don't know if you all realize but iTunes has been updated more than five times so can you please update your information on how to transfer apps form a IOS device to iTunes please

Please be aware that you are not communicating with Apple when you post in these forums. Most of the people who will reply to your posts are, like me, your fellow users.
As to your comment, I don't know what it is you're referring to, but if you believe a support article is incorrect, you can tell Apple about it here:
https://ssl.apple.com/support/feedback/
Regards.

Can you please fix the move and scale when adjusting a wallpaper can you set it up right before iOS 7 update

Can you please fix the move and scale when adjusting a wallpaper can you set it up right before iOS 7 update and it aggravates me that every time I try to put a picture of my wallpaper is just Zooms in and you can't see all of the picture it wasn't like this before

Nobody here can change it. We're all just other users like yourself here.

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

Can you please help me how resolved this issue.

Hi Experts
I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
LDAPRC 010 another server is referenced.
Can you please help me how resolved this issue.
With Regards,
Trinadh Bokka

You may be able to solve by using
Note 1151329 - Depth of LDAP search is only one level below the base entry
Markus

Can you please fix the iOS 4.3 dropped calls?!

Hi,
There was another forum thread about iOS 4.3 dropping calls, and it must have been taken down because the user mentioned downgrading.
In any case, I need a solution for my dropped calls.
I had no problems with hours of calls on IOS 4.1 on an iPhone 4, and then decided to "upgrade" because I would rather not have my location monitored all the time. I used to make long conference calls too.
Now, I can't make those conference calls without it dropping every few minutes, and sometimes I have problems connecting with people. Today, my call to my father dropped after 2 minutes, and then it dropped every time I called him back (4 times). The other day, I tried to get a conference call going, and it dropped more than 10 times. I NEVER had that problem with 4.1.
Yes, I rebootted it. Yes, I even REFRESHED and gave my iPhone a completely new start (accidentally erasing some pictures I meant to keep along the way). It DIDN'T WORK.
Now, I'm frustrated. Can anyone help me with a legal idea that I haven't tried yet? Or can you developers fix this situation - QUICKLY?

Sorry, not refreshed -- I meant restored.
I live in Eugene, OR, but I have read somewhere that people in DC are having problems. What's the deal?

Can you please share your experience in implementing / upgrading the Primavera EPPM R8.3?

Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.

Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel

Can you please test your Unibody 17in 9600 graphics card.

I have a problem where I am getting green lines and distortion lines on my screen when I am playing COD 4. I've been reading through forums on what is happening to other people with the same problems. I have read that some have tried a SMC reset and have had good results temporarily.
I think there is a way to replicate the problem by going to apple's movie trailer site and downloading three HD trailers. Put all the trailers on loop and let run for at least 10 minutes.
Please post your results..
Note: If you did do a SMC reset put the machine to sleep and then wake it up and see if the graphics problem is still gone.
Thanks.

Hi,
if you want to speed Motion up for under 300USD - the best way is to change your graphic card to ATI 9800 Pro Mac Edition for 249USD.
This card you can find here:
https://eshop.macsales.com/item/ATI%20Technologies/100435066/
There is a faster card to your computer - NVIDIA 6800 GT DDL or NVIDIA 6800 Ultra DDL - but there are much more expensive:
http://www.welovemacs.com/6613441.html
http://www.welovemacs.com/6613332.html
And in fact, it is almost all you can do with your computer.
Of course you can ad some RAM (I don't know how many RAM do you have now). For about 90 USD you can buy at OWC 1GB of RAM - it will help a little in Motion.
I think that you can not have PCI-X graphic card installed in your computer - only AGP card will work.
And besides of it having two cards, if you don't have 3 monitors connected, doesn't have any sense. Only cards called crossfired can be installed in pair for have better performance.
Marek.

Can you please fix problem error msg ..well this is embarrassing ..Firefox is having trouble recovering window and tabs. Etc. comes up all the time

I checked FAQ and solution to quit first and not close windows didn't help me. Will a new version be coming out to fix this problem? And if so PLEASE make it soon

hello, this is currently a problem in firefox when you first close all open firefox windows and then close the application afterwards - the bug should be addressed in a later version of firefox.
as a workaround in the meanwhile you could close firefox (through firefox > quit) while the browser window is still running or try this: enter about:config into the firefox location bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''.

Can you please fix the bug where firefox continually collapses addon buttons into the "more tools" dropdown? Your continued ignoring of the bug is incompetent.

No further details needed. 140 people saw an archived report of this a year ago.
Fix the problem already.

A year ago Firefox had a different user interface, so a comparison isn't accurate.
Usually caused by an extension or two - not directly by Firefox itself. Try moving the add-on buttons into a different order or disable them one at a time to find the culprit.

Want to downgrade my iPad2,4 to 5.1.1 from 6.0.1, but getting 3194 error. Apple guys, can you please fix it?

Are there any working solution yet? And will it be fixed?

Have you got the latest version of iTunes on your computer ? There is some troubleshooting for that error code on this page : http://support.apple.com/kb/TS3694
Edit : misread your post's title, I thought you were wanting to update to 6.0.1 - you can't downgrade, it isn't supported

Would you PLEASE fix your installer!

I am still getting support calls about users installing the
latest Flash player, and then being unable to view any Flash
content in IE. When I go through, I find that the Flash OCX just
won't initialize. I still haven't been able to find any info on how
to fix this, so I am having those users view the pages in FireFox
if available, or in some cases, setting them up with a virtual
machine to run the page. (Telling them NOT to install the latest
Flash player.)
When is this going to be fixed? I just got 2 more calls on it
today! I can't be spending 30-45 minutes setting up FireFox and
explaining the issues to the users constantly every single freaking
day just because your programmers are too lazy to fix their
problem. Fix this!

quote:
Originally posted by:
dgingeri
You're kidding me. They don't even look at these forums? What
use are they then?
Read through the forums and you'll see what use they are.
Flash users of varying experience help each other out in questions
of scripting, design, development and other relevant advice. I've
solved a lot of my Flash problems here by asking advice, and have
tried my best to give useful advice in return.
Occasionally someone from Adobe will comment on an issue. But
Adobe provides their bug report page for a specific reason: once
you report something there, it is officially logged and they
evaluate the issue. If you give them enough specifics about the
trouble you're experiencing, there is a strong chance you'll get a
personal reply from an Adobe developer to ask for more details.
It's happened with bugs I've reported.
We all have issues with Adobe (I was screaming at customer
service on the phone just yesterday over my upgrade to Acrobat 9
which never arrived). But this forum isn't the place to communicate
directly with the company.

Adobe - Can you please get your code straight before releasing it !

The Adobe Creative Cloud CC version is the drop that makes the water in the glass spill over...
The Creative Cloud App is not at all reflecting anything current etc.. and one has to sign out all the time.
This is baby-code !
Lightroom 5 is about the most erratic software I have ever worked with...
1) Constant Freezes
2) New Version 5.2 NOT showing in Creative Cloud App
3) When trying to download manually - ACC app opens and nothing happens
4) If one selects 2500 Photos in Lightroom and reply a preset to all the images at one WHILE the previews are being updated) LR WILL freeze
etc etc etc etc
You really should be testing you software before you release it to the public. You code has been disintegrating the past years and I ann many of the co-workers
are just waiting for other apps to emerge. What happened to the old adobe ? The quality-makers ????
I'm on OS X 10.8 and have NO idea what it looks like in the windows world. But I know that you have completely LOST any control over your own apps on OS X!
I am a very unhappy camper and if this does not change in the near future you are going to have people that littel cure adobe river !

Hi ;-)
1) I have used LR since V1 and since V4 this software along with ALL adobes software has been fiercely deteriorating.
2) Adobe according to themselves ARE reading and responding to these forums... Unless they support pages are as bull as their "alleged" real human behind a chat ;-)
3) I process around 30,000 images per week in Lightroom (paid work) and let me tell you at that amount of images... This app is not in the pro league... BUT it COULD be... If only adobe would test their software prior to embarkin on the PAYING public... Perhaps because so manu are using pirated versions of adobes software, they have stopped caring.. As a long time paying client I feel *****-slapped !@
I do NOT beta test for adobe ! If they wanna get rid of their bugs, all they need to do is to contact me and add me to the list.. That will fix at least 100 bugs currently IN the ware... But I highly doubt that they beta test this software... If they do, they should REALLY skim thru their testers and relieve them of their duty - No personal offence meant !

Can you please fix your browser's tab issue? (I've switched over to Chrome)

Similar Messages

Maybe you are looking for