Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

I am planning on using the USB-8476 LIN interface as the LIN bus Master in an application.  The application would require the USB-8476 (Master) to program a Node ID and Zone ID into a slave device that is on the LIN bus.  The slave device is a PIC12F1822 mcu + MCP2021 LIN transceiver.  After reading through the User/Software Manual for the USB-8476, it does NOT seem possible to assign an ID to a slave device.  It seems like you can only communicate with slaves that already have an ID programmed into their memory.  The Node/Zone ID terminology is used by our customer and may not conform exactly to the IDs associated with LIN.  I am new to the LIN world, so please let me know if you need more information about what I'm trying to accomplish.  Can you program a Slave's Node ID or Zone ID using the USB-8476 as the LIN Master?

No need to respond to this topic.  The company that builds the slave device has a communications specification that was recently provided to me.  I should be able to use the NI USB-8476 and a call to the ncWrite function (NI-CAN Frame API function) to accomplish my goals. 

Similar Messages

  • Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

    can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

    Hi eddinchina,
    You should have no need to use the Old Sync account.
    As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
    You may use the same email address with both accounts.

  • TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

    HELLO TO ALL
    ABIGMAC1 HERE! GOOD DAY TO ALL
    JUST WONDERING IF ANYONE COULD ANSWER THIS
    CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
    I CAN USE AN AUX  3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
    THANK-YOU
    ABIGMAC1

    Check the documentation for the car audio system for device compatibility.  A shuffle may not be compatible.
    If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
    If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
    http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
    and connect your shuffle's headphones jack to the car audio system.  You can then use your shuffle to play through the car audio system.

  • HT4108 Can you connect an iPad to any TV to Skype or use the Internet?

    Can an I pad connect to any TV in order to Skype or use the Internet?

    No, you will need a computer that can be host for the USB dongle.
    Unless your dongle has hotspot functionality (can create littlle private wireless network), then you should be able to connect to it.

  • Can you program a universal remote to a mac?

    Can you program a universal remote to a mac?

    If you want to use a universal remote?
    see > using a universal remote with an Apple computer - Google Search
    If you have an Apple Remote?
    see > Pairing your Apple Remote with your computer
    Go to: Apple > System Preferences > Security & Privacy > General > unlock the preference panel > click the Advanced... button and then the Pair... button.
    FWIW the Apple Remote from my 2006 iMac works fine with my 2010 Mac Mini running 10.8.5.

  • I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or

    I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or there could be a permission problem.   Make sure you have proper authorization on the server and the server is properly configured.  File activity incomplete. 1 file(s) or folder(s) were not completed.  Files with errors: 1 /html

    Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
    Mylenium

  • Can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

    can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

    thank you for your reply, it is not very fair from apple, since for not using your credit card, you need to create a new account and if you do not have multiple e-mail  working , you are stuck! thanks anyway

  • In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

    I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
    2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
    Please advise.
    Thanks,
    Bob

    Copy the entire /Music/iTunes/ folder from old computer to new computer.
    See this -> http://support.apple.com/kb/HT4527

  • How can you pull in pdf's from iBooks and bring them into the Box app?

    How can you pull in pdf's from iBooks and bring them into the Box app?

    That sounds great, but I'm lost.
    I followed these steps:
    1) Open your PDF (in Adobe Acrobat Pro)
    2) Chose print
    The print/printer options pop-up will show.
    3) In the printer section, do not use your normal printer, a printer named Adobe PDF should be an option. Chose it.
    4) Under the "Page handling" section, change the Page Scaling drop-down menu to "Multiple pages per sheet".
    It works fine, but it looses all of the font information and the search no longer works. How can you do it and save the font info, so the search tool continues to operate.
    Am I missing anything?

  • How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

    If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
    I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
    How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

    Hi,
    Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
    http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
    http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

  • Can you pass a hidden value along with your select option in the form selec

    Can you pass a hidden value along with your select option in the html form select

    Off topic. Locking.

  • Can you take photos on digital camera and see them appear on the ipad using the camera connector

    Can you take photos on digital camera and see them appear on the ipad - i have a canon 400d and the new ipad.......

    The camera connection kit accepts only SD camera memory cards.
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • Can you run a windows only Photoshop plugin on a Mac using Parallels?

    Can you run a windows only Photoshop plugin on a Mac using Parallels?   In particular a .8BF plugin like PTFilters.8BF  or Super Cubic.

    If you also have a Photoshop version of the Photoshop application, the answer is of course YES.
    Otherwise, the answer is no,
    If you have the CC subscription, then of course you can install a Photoshop Windows version and run your plug-in.  That'll be separate from your Photoshop Mac install..

  • Can you enter cumulative numeric rating data per response in colums on the Formcentral Data Form?

    Can you enter cumulative numeric rating data per response in colums on the Formcentral Data Form?
    In other words can you rate each responce numerically - have it add up per responce etc... - and then divide up the responces by the accumulated ratings ( All rated 5 ) (All rated 8) etc... ?
    Thanks
    Al

    Hi Brian
    The form is a grant application where the applicants are rated on their responses.
    The ratings are done after the answers are accumulated in the Formscentral contol panel. The ratings are done by 3 other project members (VPs).
    These ratings are in 3 catagories, each catagory is worth up to 5. The VP's will access the form central panel and rate each applicant per catagory.
    I have added 3 catagory colums with multiple choice rating selections from 1 to 5 for each of the 3 VP's for a total of 9 colums (3 x 3 catagories)
    The reason I did it this way is because at this point I would be relying on an Exel download to calculate the winner or/and also the top rated winners
    per the ratings that the 3 VP's put on them per catagory.
    Thanks for your help - do you have any suggestions to make this smoother.
    Thanks
    Al

Maybe you are looking for

  • AAMEE 3.1 for Creative Cloud?

    Has it been confirmed that the AAMEE 3.1 build will work with Creative Cloud for Teams or even the Desktop app? Adobe's documentation doesn't state anything about Creative Cloud; only about CS6. Creative Suite Enterprise Deployment | Adobe Developer

  • Table that provide Tax value & Freight Value

    Hi, I wanted to know that in which table does contain the details of the Tax and Freight value paid against the purchase order. regards Umakanth.

  • Yosemite is using a lot of RAM (about 5GB) in my MAC, why?

    Yosemite is using a lot of RAM (about 5GB) in my MAC, why?

  • Error messages when generating

    Hi, I am getting error messages when generating Webhelp that I haven't gotten before. When i go into the output files after getting these messages, I notice there are hardly any of the java script files in there. The messages I get are "Template Acti

  • MD04 - filter out storage location or sales order stock

    Hello, we are using sales order stock in a specific storage location. Is it possible to filter it out of the stock/requirements-list (MD04). I saw filters in customizing but don't know what to select. thanks