Can you publish the sample Named Entity Recognition experiment as a web service?

I've created a new experiment using the Named Entity Recognition sample, ran, prepared as a web service using the new tool, and published as a web service.
When I try the 'Test' option on the web service dashboard, this results in an error:
"Unable to finish 'Named Entity Recognition' test. Execution encountered an internal error."
The same happened yesterday with the old way of publishing as a web service (setting a publish input and output), and if I added an additional project columns module after the NER module and set this as the publish output.
Does anyone have any ideas what the problem might be? Is it not possible to use the NER module as if it were a trained model?
(I'm probably missing something obvious!)

Hi Alice,
The service has been updated and the module should be fixed. Sorry for the inconvenience. Please let us know if you encounter any other issues.
Thank you, Ilya

Similar Messages

Can you adjust the Sample Size in LR?

In Photoshop, you can set the size of the eyedropper to sample a single pixel, 3x3 average of 9 pixels, 5x5, 11x11, etc. It can make a big difference when sampling a single pixel as opposed to the average of a larger area.
Can the sample size be set in LightRoom?
If not, what is the sample size in LR when you run your cursor over the image? Does this vary depending on the displayed magnification of the image?
Thanks,
Lou Dina

White Balance and the Color Sampler are not the same unless things have changed. White Balance is always 5x5 image pixels while the Color Sampler is 5x5 screen pixels. Therefore, one can increase the
accuracy of the color sampler by zooming in beyond 1:1. In the case of White Balance, I don’t think that’s true, again, unless that's been recently changed. Yes, kind of confusing. Bottom line though, zoom in to do precise work.

How can we pass the entire rows of a table to a web service in a VC model ?

Hi,
On the click of the submit button, I have to pass the rows of two tables into an enterprise service. This service also takes other fields of a form as an input.
How can we pass the entire rows of a table into a service ?
Regards,
Nitin

Hi Nitin,
It seems that you have two or three different structures to pass data using your webservice. In your main question, two tables, you can join both in one table and from there call the webservice. In order to pass the entire table you need:
1. Draw a line between your joinned table and your service,
2. Map the fields,
3. Create a 'SUBMIT' in your table tool bar. Right click on your table and choose 'Create Toobar', '+', name and choose 'Submit' as your event.
4. Go to Configure Element (Table View) 'Multiple' at Selection Mode.
Reward points if helps you to solve your question.
Regards,
Gilson Teixeira

Can you change the DEFAULT VIEW of a published iCal to MONTH VIEW?

Can you change the DEFAULT VIEW of a published iCal to MONTH VIEW? I use this for a vacation rental and people never ever ever ever need to see anything but the MONTH VIEW. I hate having to tell them to click MONTH view at the top of the page. Is there a way to force it to always appear in MONTH? Thanks!

ddotcom,
Welcome to Apple Discussions.
Unfortunately no, but if they are repeat viewers why not tell them to change their view to "Monthly" using the "Preferences" button on that page?
;~)

Anyone solve the "you can't change the record's entity name" issue

Been getting the following in my system.log. I have noticed it was posted before but no replies on how to solve it. Hoping to get some traction on the issue.
This is on a Intel Duel Core running 10.8.4
Thanks,
Ron
Aug 24 11:35:48 enterprise iCalExternalSync[6112]: [0x7ff3f8c0e4e0] |Miscellaneous|Error| SyncServices precondition failure in [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
              "com.apple.ical.sound" = Basso;
              "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
              owner =     (
                  "Event/p76"
              sound = Basso;
              triggerduration = "-54000";
Aug 24 11:35:48 enterprise iCalExternalSync[6112]: [ICalExternalSync ]Encountered exception: [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
              "com.apple.ical.sound" = Basso;
              "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
              owner =     (
                  "Event/p76"
              sound = Basso;
              triggerduration = "-54000";
          } withStack: (
                    0   iCalExternalSync                    0x000000010afd0a60 iCalExternalSync + 125536
                    1   iCalExternalSync                    0x000000010afbfac9 iCalExternalSync + 56009
                    2   iCalExternalSync                    0x000000010afcf694 iCalExternalSync + 120468
                    3   libdyld.dylib                       0x00007fff8a46d7e1 start + 0
                    4   ???                                 0x0000000000000007 0x0 + 7
Aug 24 11:35:48 enterprise iCalExternalSync[6112]: [ICalExternalSync ]NSException name:ISyncInvalidArgumentsException reason:[ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.DisplayAlarm to com.apple.calendars.AudioAlarm in {
              "com.apple.ical.sound" = Basso;
              "com.apple.syncservices.RecordEntityName" = "com.apple.calendars.AudioAlarm";
              owner =     (
                  "Event/p76"
              sound = Basso;
              triggerduration = "-54000";
Aug 24 11:35:48 enterprise SyncServer[6084]: [0x7fa1b940be70] |Server|Warning| lost connection 0x7fa1ba226f40 to com.apple.iCal

The same I guess as if your work won't let you do anything - not a lot
I would hold fire at the moment as I think its too early to be changing router security - I have no inside information but like many I suspect its a combination of firmware updates to routers and a patch needed on the iPad. If solely the latter then it will be fine for you, but if for example, the work routers are using Cisco Clean Connect, then there will be little you can do - it will be up to work I'm afraid.

Where can I get the sample code of gantt chart?

hi, all
I want to use gantt chart component.I find this video http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/DVT_Gantt_Chart/ADFDVTGanttChartDemo.html.
where can I get the sample code in this video?
I have got the demo <strong>dvt-faces-demo.ear</strong>.but in this demo, the code of events process is too simple.I want more detail code of date change, denpendency change and so on.
this is my mail [email protected]
Thanks
Best Regards
kenshin
Edited by: Himura Kenshin on 2010-8-20 上午4:57
Edited by: Himura Kenshin on 2010-8-20 上午9:03

Hi Katia,
Essentially the same sample app which was referenced above (http://download.oracle.com/otn_hosted_doc/jdeveloper/11/demos/DVT_Gantt_Chart/ADFDVTGanttChartDemo.html). There are many features implemented in this sample which I'll be "reinventing the wheel" with. Its been a bit since I worked with the gantt component as I had to abandon for other development but will be getting back into it here shortly.
Namely as I remember, I had difficult time getting the gantt to load quickly with large amount of tasks, difficulty getting the selected item when using context menus or buttons defined within the control, and a few other minor issues which could be fixed as I was using the first release of 11g and cannot remember specifics. I'll let you know as I get back into it if I see similar problems.
For example, if you go to the ADF Demo Site (http://jdevadf.oracle.com/adf-richclient-demo/faces/feature/index.jspx) and click on "Project Gantt Custom Menu and Toolbar - add menus and buttons on the Project Gantt Menu and Toolbar". The buttons work, however if you first select a row in the left and then click the button, you have to click twice for it to work (in my findings the action listener never "fires"). So in my case I want to select a row and then have a custom event for that selected row when I click the button. There were other similar findings I had when I tried to go off of the examples.
Hope this helps.
Thank you,
Kris

How can I publish the "levels" effect to final cut pro x?

Hello,
I'm trying to publish all of the color correction plugins from motion into final cut pro x, the "levels" effect in particular. I have read the instructions in the manual and published all the parameters and then saved it to send it over to final cut pro x but the problem that I'm having is when I open it up in final cut pro x all the parameters are there except for the histogram and its controls, what am I doing wrong and how can I fix it? Thanks.

The short answer is you can't publish the levels graphic UI (you can, but it doesn't work in FCPX - all you get is the collection of the individual slider controls.)
You can create a shape with a gradient fill. Set a middle color tab and a second opacity tab. You can use Link parameter behaviors from the color/opacity tabs to the the filter > Levels parameter controls. Use the color tabs for Black In, Gamma and White In. Use the Opacity tabs for Black Out and White Out.
You can publish the shape's gradient.
The problem is, to publish this UI, you're publishing an actual gradient and people will be able to make alterations to the gradient (it won't change how it operates the levels controls.) The other problem with it is that it is possible for users to accidentally pull off or add new tabs which will immediately break the effect (and immediate "undo" should repair it though). Then, figuring out how to manipulate the Gamma control is going to be a trick (I haven't figured out yet.) The values go from 5 (all the way left) to 0 (all the way right - with 1 the 50% mark) for the Gamma control itself, but the UI controller (the middle tab on the gradient) moves the control in the opposite direction and the values are logarithmic in scale. You can use the mid-tab control on the gradient linked to the gamma parameter value, but it won't behave the same way as you would expect a genuine levels control to behave (left to right goes from black to white when the expectation would be the opposite.)
A gradient with links into the filter is about the only way to go if you want it give it a shot.

Java arrays - can you name the keys?

i have 1 function that declares 2 ArrayLists of type String. They are the same size and the values are related. Let's call them A & B.
I was hoping i could have my function return just 1 array, with the values of arraylist A being they keys of the returned array, and the values of arraylist B being the values in the returned array.
But can you name the elements of an array in java? in php you can, but in java, the only examples i have seen only use the standard #'s: 0, 1, 2, 3, etc. if you can, please post sample syntax.
i guess i could use a double scripted array, but... well i don't exactly know what the sytax would be for that in declaring the funciton.
if someone has a link of these kinds of examples / topics they could send me - that would be great too - i googled it but haven't really come across any.
thanks in advance

It appears as though what you are trying to do is associate a specific "key" value with another value. For example, let's say you want the word "dog" to be the key for the arraylist value of "bull dog."
The perfect data structure for this that Java provides is called a Map. Here is some sample code.
//create something called a HashMap where the first
//value is the key, and the second value is the value
//that the key is associated with
HashMap<String, String> map = new HashMap<String, String>();
//now, consider the previous example...
//here is the syntax for storing those values
map.put("dog", "bull dog");
//and this would be the syntax for getting a value
String value = map.get('dog");
//which would give "bull dog"
{code}
Hope that helps :)

Where can I get the sample layout pages that were in the older CS Dreamweaver?

Where can I get the sample layout pages that were in the older CS Dreamweaver. You normally find them when you press "More" on the start screen and you see it on the "layout" section.
On the CC version you only get 2 out of the 20 that you used to get. How can I get them back?

You can refer the threads below
http://forums.adobe.com/message/5491936#5491936
http://forums.adobe.com/message/3100218
http://forums.adobe.com/message/5096504#5096504
Please visit for more starter layouts http://helpx.adobe.com/dreamweaver/using/getting-started/templates.html

Where can i find the sample instruments in logic pro x.the proper plugins

Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

HT4597 can I publish the web pages made with aperture in icloud?

can I publish the web pages made with aperture in icloud?
thank you.
Luis da Cruz

iCloud does not provide website hosting: you will need to find another hosting service - there are plenty to choose from.

Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID. Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine? I'm not sure how that works when you have multiple machines.

An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. So you can use the same Apple ID for up to 10 Macs associated with it.
To create an Apple ID you need to enter your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

disregard post.

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

Can you publish the sample Named Entity Recognition experiment as a web service?

Similar Messages

Maybe you are looking for