Can you pull a still photo off of a video clip

I wanted to pull some still photo's off of a couple video clips that I have in imovie. Can it be done and if so how? Thanks for any info.

Hi
Yes
Much easier in iMovie HD 6 but read Karstens site
Karsten Schluter : http://karsten.schluter.googlepages.com/im08tricks
Here You find lot's of trix.
Yours Bengt W

Similar Messages

Can you pull a still picture off of video

Can you pull a still photo off of a video in any program on MAC's?

Yes. Put the video on pause at the place where you want to take a "still" photo. Then take a screen shot by using the cross hair option - Apple/Shift/4 or use the "Grab" app which is inside your Utility folder.

How can i get a still photo off an iMovie?

How can i get a still photo off an iMovie?

You do not need the QuickTime MPEG2 disk image unless you want to convert some MPEG2 clips. For photos, you don't need it.
You can buy it from Apple at this link, but like I said, you should not need it.
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x

Can you make a still photo from clip

How do I take a frame from imovie and make a still photo from it.
Thanks

AppleMan1958's Tip, as referred to by Matt, works fine for iMovie '09, but if you have iMovie '11 you will need to use a different procedure.
Unlike all earlier versions of iMovie, the latest version (IMovie '11 - 9.0.2) does not provide for the creation of stills from video for use outside the program. Certainly, you can create freeze frames in the project and add stills from the Events - but these are only available within the project.
The best solution is to use MPEG Streamclip - available from the developer (Squared 5) here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
In the Project or Event, right-click (or control-click) on the clip from which you wish to extract the still. From the pop-up menu select Reveal in Finder. Drag the clip to MPEG Streamclip. Move the playhead to the desired frame. Now, from the menu, select File>Export Frame. The following window will appear:
Choose your preferred Format (JPEG, TIFF or PNG) and other options if desired, then Save. The saved file can now be used in iPhoto or any image editing application, or printed as required.
John

Video editing 'special effects': can you apply a fast/slow motion effect to video clips?

I haven't been able to find a way to create the effects of fast or slow motion in the video clips. Is there a way to do this? If not, please consider adding it in the full version - I use these effects alot when editing videos.
Thanks!

Hi,
When working with a video layer (clip) in the Timeline panel, either 1.) Context-click on the selected clip (right-click or ctrl-click for mac) or 2.) Click on the flyout button located at the top right corner of the clip.
The "Speed" option should show up in the flyout menu. This is only available for video layers. If you're working with still or smart objects the speed option is not available.

How can I make a still photo from imovie

How can I make a still photo from imovie?

Let's assume you have iMovie 11 (Version 9). (If you have a different version, let me know. The instructions will be different.)
First, get an app called MPEG Streamclip, which is free. (google MPEG Streamclip from Squared 5)
Open MPEG Streamclip.
In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
Drag this clip into MPEG Streamclip
In MPEG Streamclip, move the playhead to the frame you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
Choose JPEG, TIFF, or PNG and give it a name.
You can then drag this photo into iPhoto.
I have created a short video Tutorial on how to do this. There is one error in the Tutorial, where it says that Command-click is the same as right-click. I should have said Control-click instead.

Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

How do you drop a still photo into a video?

how do you drop a still photo into a video -- while continuing the audio track unchanded?

by popular demand, Kelli Applies Lip Liner to Audrey's Lips has been completely re-mastered. (ok, it was just one person who asked, but she's a very intelligent and articulate observer of such matters. she noted that the clip suggests "interesting possibilities", but that men probably would be unaware of that. i explained that "men are pretty simple, so we don't see too many moves ahead." she laughed.)
i believe that in an earlier post i indicated that in the re-mastered version i would delete the in-camera audio and dub in the audio from the Zoom H4n audio recorder. this i did.
(syncing the video and audio continues to be a nightmare, though ).
besides signifcantly improving the sound quality, using a separately recorded audio source allowed me to drop (2) still photos into the video track, and still preserve the continuity of the recorded conversation.
dropping in the stills the correct way (unlike in the first re-mastered video) was easier than i thought it would be. it's just a matter of dragging the Premiere Elements 7's red vertical timeline-cursor to the point on the timeline where you want the insert to begin, and then dragging and dropping the still photo alongside the red cursor. the amount of time the still will appear can be shortened or lengthened by dragging with the mouse -- the same way any other file can be extended or contracted.
the video coming out from the still was now running behind the soundtrack. but, the timeline shows the exact duration of the still, so the video coming out was shortened with the mouse by that same duration, and then the audio and video were back in sync.
to add the "sound effect" of the camera's shutter clicking (actually its mirror slapping) before each still appears, i found a point on the audio recording that had the click of my camera actually taking a still, and that had only a little audio from the models underneath it. removing all the audio before and after the sound of the camera click was, again, just a matter of finding the start/stop points i wanted, moving the timeline's red cursor to those points, and using the mouse to drag the ends of the audio file alongside the cursor.
because i wanted the sound of the camera click to merge with the converation anyway, i just put the audio file of the click on its own audio track (which allowed me to separately control its volume).
however, when i tried to copy and paste the audio file of the camera click to the beginning of the second still photo, i was not able to copy and paste by the normal method of using the mouse to right-click-file/left-click-"copy"/left-click-"paste". eventually, i tried doing so by clicking on "edit" on the menu bar at the upper left and then clicking on "copy" and "paste", and there was no problem. (go figure.)
as with the other re-mastered video, i brightened, increased contrast, made the hue a bit warmer, and added a little sharpening. (this has to be done individually for each separate video file that makes up the whole piece -- at least that's what i did.)
interestingly, the audio level can be tweaked directly on the timeline by using the mouse to drag up or down a horizontal yellow line running the length of the audio file.
i again rendered in Adobe Flash Video (.flv). (annoyingly, in XP at least, there's a default download destination that has to be reset everytime you want to save in a different location). from a drop-down menu i selected "NTSC Flash Video 700k" (just in case) and left the file name as "Untitled" (since no matter what i change it to, it saves as "untitled.flv", so i have to rename it anyway once it's saved).
i went into "Advanced..." and, to preserve the dimensions and the HD, i unchecked "Resize Video", chose "Same as source" for the frame rate, and checked 2 "Encoding Passes" (just in case).
for some reason, everytime i click the "save" button, it asks what i want to call these settings. if i use the name i used for the same settings on the previous go-round, it says that that name is already used and (impliedly) can't be used again. so, i add the new date, and yet another name for the same settings gets added to the drop-down menu (odd).
once the compressed .flv file was saved, it was an easy upload to youtube.
btw, it seems that the Elements 7's Audio Mix defaults to 0 dB, OR whatever the setting was in the prior saved version, unless i use the mouse to continuously "ride the slider pot". that's ok for a 48-second video, but does anyone know of a way the dB can be set so that it just sits there, instead of moving back to where it previously was

How can I create a still photo from my video

How can I create a still photo using my video.

I'll assume you want to create a still to use outside FCPX, not a still frame within FCPX. It's kinda hidden in the "share." Go File/Share/Add Destination. You want "Save Current Frame." After you've created that destination, it'll be there for you in the future under Share.

How can I put a still photo in to a iMovie tralier on the iPad 2

How can I put a still photo into a iMovie tralier on a iPad 2

Here's one way.
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

How many libraries can you have in i photo?

How many libraries can you have in i photo?

gussie88 wrote:
Was she satisfied eventually!!! haha If you export and import photos to a new library, do faces -places etc transfer too? Thanks
Yes, I believe they do. The places data is associated with GPS coordinates tagged on each photo. I think the faces data works the same way -- it is associated with each photo regardless of what album it is in.

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

How can you tell if all photos in an event have a Place assigned?

How can you tell if all photos in an event have a Place assigned, without clicking every photo in the event individually with the Info bar open to see if there is a little map in the bottom left hand corner please?
cheers

Terence Devlin wrote:
File -> New -> Smart Album
Event -> Contains -> Name of Event
Plus
Place -> Does not contain -> leave the last field blank
Thanks for that, just getting used to these brilliant smart albums, do I have to have one of these smart albums for every event though? can I not just use it for all photos?
cheers

How can you pull in pdf's from iBooks and bring them into the Box app?

How can you pull in pdf's from iBooks and bring them into the Box app?

That sounds great, but I'm lost.
I followed these steps:
1) Open your PDF (in Adobe Acrobat Pro)
2) Chose print
The print/printer options pop-up will show.
3) In the printer section, do not use your normal printer, a printer named Adobe PDF should be an option. Chose it.
4) Under the "Page handling" section, change the Page Scaling drop-down menu to "Multiple pages per sheet".
It works fine, but it looses all of the font information and the search no longer works. How can you do it and save the font info, so the search tool continues to operate.
Am I missing anything?

How can you sync ipad 2 photos to pc not using the cable or icloud sync?

How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

Can you pull a still photo off of a video clip

Similar Messages

Maybe you are looking for