Can you put pics on this board?

im having a hard explaining my problem because i type so bad.

Yes, you can put pics here, but only as a link. You have to upload your pics somewhere on the Internet so that we can see it by going to its link. The link should end in ".jpg" or ".gif" or something that's a picture file.

Similar Messages

  • Can you PM someone on this board.....

    Can you PM (Private Message) on this board.
    Or is that function disabled.  Or never existed....
    Can't seem to find it.

    Thanks.  I figured that.  Just thought I would ask.  Kind of odd can't PM  But OK.

  • HT4623 my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

    my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Ibooks: how many books can you put in it

    Hello,
    I have an ipad 1 and since the latest update for ibooks, ibooks keeps loading my books (the wheel in the right corner keeps rolling).
    I use the ipad also as storage for all my e-books (i have more than 3000 books). I know E-readers are getting slow if you put too many books on it, but I thought it wouldn't be a problem for an ipad, since there is much more memory and gb on then on an e-reader.
    Does anybody knows if there is an limit on the amount of books you can load in ibooks? And if there is a limit, howmay books can you put on the ipad 1 without problems?
    thanks

    Unfortunately we must be the only ones with the problem so no hope for us friend unfortunately..
    In my case, it's an Ipad 2 , 64G no 3G which worked great.. Now, i don't remember when latest iBooks was updated, but today i realised my iBooks kept on refreshing forever and not showing ANY books.. (((((
    I also have many ebooks which is what's common in our cases.. Other than that, I tried everything, turning on off ipad, loading itunes and trying to throw some more books in there just in case, eventually deleting from ipad and installing again from itunes iBooks... NOTHING worked.. Unfortunately..
    I'm VERY disappointed since my ipad cost me about 720 euros and the PRIMARY reason i got it was about reading e-books... (on a sidenote when i purchased it I was shocked to see iBooks was not even already bundled in - thought it was a joke)..
    Hope someone from apple might read this and help us.. :////////////

  • I try to sync my nano and get:  the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?

    I try to sync my nano and get:  the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?

    Hello pryan1012,
    What this message means is that you have more music in your itunes library than there is free space in your ipod.
    I had this same issue at one time. This is what helped me put my music on the ipod. I used manually manage.
    Learn how to sync muisc here.
    Hope this helps.
    ~Julian

  • How can you put flash player in kindle fire hd?

    how can you put flash player in kindle fire hd?

    The latest Kindle Fire HD is not officially supported by Flash  Player.  Please see this page for a list of all certified devices:
    Flash Player Certified Devices
    That said, some users have been able to get Flash Player working on the Kindle Fire by using Dolphin, a third party browser.
    How to install Adobe Flash on your Kindle Fire HD   
    Get Flash on Kindle Fire HD (video)

  • Can you put the small DVD discs from a camcorder in the DVD slot of the iMac?

    Stupid question...can you put the small DVDs from a camcorder in the DVD slot of the iMac?

    That could be a challenge. If I am not mistaken that camera strictly records to DVD - RW and has no digital output connectors, is that right?
    My only experience with a camera like that was a bad one. I was able to get the video off the disc using a tray-loading iMac but it was painfully slow.
    iMovie (for example) is designed to work with camcorders such as those specified in this reference:
    http://help.apple.com/imovie/cameras/en/index.html
    I cannot find the DCR-DVD92 in that database
    You might consider finding an external USB slot-loading DVD drive, but as I say my experience was painfully slow, and you might run into file format compatibility challenges.
    I am sure it's possible but it won't be as easy as importing video from something like an iPad or iPhone. I still use a camcorder on occasion but it has a FireWire port. That's easy.

  • HT5035 Can you put the balance that you have redeemed off of a card onto your iTunes account back onto the same/new card ?

    Can you put the balance that you have redeemed off of a card onto your iTunes account back onto the same/new card ? I do not wish to use this balance and have not deducted from the original balance and wish to put back on to the card.

    Only the iTunes Store staff can. Click here and request assistance.
    (89001)

  • Can you put KM attributes in a office document?

    Hello,
    I have a question : "Can you put KM attributes such as a document version number automatically in a Office document"?
    For iso documents it's needed to have a version counter in the word document itself. If the km version number could be copied into the document this would greatly reduce the number of errors.
    Thanks,

    Hi Frederik,
    you would have to implement a repository service which subscribes to creation / modification of resources, then checks if the resource is an MSOffice document, and in this case modify this document again (this is also a trap, you would create a new version(!) and your RepService would get called again; without care, you will quite fast create an infinite loop..).
    To set properties on a MSOffice document you could use http://jakarta.apache.org/poi - anyhow, as said, this sounds like not being very reasonable in the case when using versioning and / or approval services.
    Hope it helps nevertheless
    Detlev

  • Can you put windows on a new macbook pro

    can you  put windows on a new macbook pro ? yes or no, which notebook can i put windows on if not the macbook pro?

    WIndows 7 is the only Windows OS supported by the new Macs.
    You usually use Boot Camp Assistant to partition the drive and install the Windows product on the Mac.
    This creates a system where you boot into Mac OSX OR Windows.
    see more at http://www.apple.com/support/bootcamp/
    There are programs such as Parallels or VMWare Fusion that can create a Virtual Machine within Mac OSX - giving you access to both Operating Systems at once. You may get slight performance issues as you would be essentially running two Operating Systems at once.

  • HT201364 if i have 10.6.8 can i put mavericks on this computer

    if i have 10.6.8 can i put mavericks on this computer

    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Can you put the labview runtime engine in a vi?

    hello,
    can you put the labview runtime engine in a vi when you build an application or do you need to install it separately on each computer that is going to run a labview application?  thank you

    I found the tutorials in labview help pretty good
    Example: Building a Stand-Alone Application
    Example: Building an Installer (Windows)
    This certainly got me started working with the project explorer to build and deploy your application.
    Hope this helps
    David

  • Can you put Microsoft Office

    Can you put Microsoft Office & Quickbooks on a mac

    Yes, there is a version of MS Office for Macs.
    But since you asked this in the iPhone forum I'll add that there is no version of Office for iOS devices. You'll have to use other apps that open, edit and allow transfer to the Mac or PC as Office files.

  • Hello can you put the H series for sale ??  please thank you, hello can you put the H series for sale ??  please thank you

    hello can you put the H series for sale ??  please thank you, hello can you put the H series for sale ??  please thank you

    These are user-to-user forums, you are not talking to Apple here. I don't know what 'H series' is, but assuming that it's a TV series then you can try requesting it via this page, but ultimately it's the TV company that will have to provide it and grant Apple a license to sell it in your country : http://www.apple.com/feedback/itunes.html

  • Can you help me explain this crash log?

    My system just crashed, but I don't understand why. Here is the log from the event viewer. What can you tell me about this?
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          2/6/2014 3:38:39 PM
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      MYPC
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>2</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2014-02-06T21:38:39.748002200Z" />
        <EventRecordID>30668</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>MYPC</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">0</Data>
        <Data Name="BugcheckParameter1">0x0</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">false</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
      </EventData>
    </Event>

    We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.  
    We prefer at least 2 DMP files to spot trends and confirm the cause.
    Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
    If you have any questions about the procedure please ask
    Wanikiya and Dyami--Team Zigzag

Maybe you are looking for