Can you put the new iworks on a ibook g3?

I am a huge apple fan. I have the iphone, ipad2 and an imac at work. I recently came across what I beleive is a ibook G3. ( it is dead and have to buy a wall charger for it). My question is this...
1. Can I add the new iworks to this computer?
2. Can I use the same iworks that I have on my imac for this G3 or do I need to buy a new software?
3. Does the G3 have Garageband?
Thanks

Check out the system requirements for iWork:
http://support.apple.com/kb/HT3879
You may be able to find a copy of iWork '05 that would work on the iBook.
If the iBook is all white, has two USB ports, and just says "iBook" under the display, it's an iBook G3 (Dual USB).
iBook G4s say "iBook G4" on the bezel beneath the display.
MacBooks look similar, and say "MacBook" beneath the display.

Similar Messages

HT5035 Can you put the balance that you have redeemed off of a card onto your iTunes account back onto the same/new card ?

Can you put the balance that you have redeemed off of a card onto your iTunes account back onto the same/new card ? I do not wish to use this balance and have not deducted from the original balance and wish to put back on to the card.

Only the iTunes Store staff can. Click here and request assistance.
(89001)

Can you put the sim card in without the tray on the iPhone 3GS?

Can you put the sim card in without the tray on the iPhone 3GS?
I don't have the tray, I have ordered a new one but would like to still use my iphone for the next few weeks

Don't....wait until you get a tray...never a good idea to rig something up

I just bought the new late 2013 iMac. Can I get the new iWork for free?

I just bought a new late 2013 iMac. Can I get the new iWork for free? I updated it to Mavericks also. The Mac App store is showing $19.99 for each iWork component (Pages, Numbers, Keynote). I also bought the previous iWork version, if that matters. Free updates for iPhoto and iMovie seemed to show up with no problems. Maybe these are just glitches that will clear up in a couple of days?

Hi. If you want it to get updated, this should take care of it.
1. Uninstall iWork from your Mac.
2. Do a fresh install of iWork from DVD.
3. Install iWork update from Apple Downloads (direct link here: http://support.apple.com/kb/DL1563)
4. Sign into the Mac App Store, and check for updates. It should now show up as a free update. You may have to give it a few minutes (i.e. 10-15 minutes).
I've been a Windows user for years, so I know all of the tricks by now. I had hoped I would not need this knowledge for a Mac, but oh well...
Good luck.

Deafult search engine on a new tab-this thread was closed but I have a related question. Once you put the new url in, what then? Close? When tried, did not work

"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanks

Thanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page!

Can I get the new iWork as a free upgrade if I have iWork '08?

Can I get the new iWork as a free upgrade if I have iWork '08?
If so, how?

It is my understanding that the free upgrade is from iWork 09. The upgrade from iWork 08 to iWork 09 is always been a paid upgrade.

Can you put the small DVD discs from a camcorder in the DVD slot of the iMac?

Stupid question...can you put the small DVDs from a camcorder in the DVD slot of the iMac?

That could be a challenge. If I am not mistaken that camera strictly records to DVD - RW and has no digital output connectors, is that right?
My only experience with a camera like that was a bad one. I was able to get the video off the disc using a tray-loading iMac but it was painfully slow.
iMovie (for example) is designed to work with camcorders such as those specified in this reference:
http://help.apple.com/imovie/cameras/en/index.html
I cannot find the DCR-DVD92 in that database
You might consider finding an external USB slot-loading DVD drive, but as I say my experience was painfully slow, and you might run into file format compatibility challenges.
I am sure it's possible but it won't be as easy as importing video from something like an iPad or iPhone. I still use a camcorder on occasion but it has a FireWire port. That's easy.

Can you put the audio to work throughout the reading of the chapter? Today, when I change the page, the audio stops

Can you put the audio to work throughout the reading of the chapter? Today,when I change the page, the audio stops

The default action is as you've noted. Audio stops when navigation to another page,
iBA doesn't offer a way to do differently, sorry.
Ken

Can you put the labview runtime engine in a vi?

hello,
can you put the labview runtime engine in a vi when you build an application or do you need to install it separately on each computer that is going to run a labview application? thank you

I found the tutorials in labview help pretty good
Example: Building a Stand-Alone Application
Example: Building an Installer (Windows)
This certainly got me started working with the project explorer to build and deploy your application.
Hope this helps
David

Hello can you put the H series for sale ?? please thank you, hello can you put the H series for sale ?? please thank you

hello can you put the H series for sale ?? please thank you, hello can you put the H series for sale ?? please thank you

These are user-to-user forums, you are not talking to Apple here. I don't know what 'H series' is, but assuming that it's a TV series then you can try requesting it via this page, but ultimately it's the TV company that will have to provide it and grant Apple a license to sell it in your country : http://www.apple.com/feedback/itunes.html

Please can you put the "Open New Tab" button back where it was on the right hand side of the tabs, or at least give an option to put it there? Thanks.

In the line of tabs along the top of the screen, there used to be an extra tab with a + in it that you clicked to open a new tab, on the right hand end of the tabs. As the tabs always float left and new tabs appear on the right this was (in my opinion) the most logical place for it. However, now the only two places I am able to put this "tab" are at the extreme left, which is illogical seeing as the new tab appears on the right, or in the toolbar along with other tools. This is adequate, but I would prefer to see the "new tab" tab back where it was.
The option to put it on the far right of the tab ribbon was not working until this latest version of Firefox, by the way, but I'm sure you know this!

Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

Can I put the Hard Drive from old iBook into new iBook?

I need a new motherboard for my old iBook which has no other damage. New motherboard costs about the same as a new iBook;
so can I have the drive from the old iBook put into a new iBook? Old iBook is about 2 years old.
Thanks!
Gareth
< Edited by Host >

Gareth; there are no iBooks with Intel processors. These are MacBooks.
As for your question, it's unlikely that you could, as the new Macs appear to have different firmware on the drives. It would also invalidate the warranty on a new computer.
Far easier to put the old drive into an external FW or USB enclosure and use it to transfer your files, applications and settings during first boot of the new Mac using the Setup Assistant.

Can you put the tabs on top setting in 'Options - Tabs' so it's easy to get at?

To save all this messing about with tabs everytime a new version of FF updates, I suggest the tabs on top setting is placed in 'Options - Tabs' so it's easy to get at. Lots of people seem to have this problem, for them and me, we prefer to have Tabs on Bottom like they used to be.
Now we have to load an addin to correct this short-sightedness. I think this is a bad idea also. Why can't the browser just work straight out of the box? It did before!
And while we are at it, the new updates should leave our customisations as they were, so we don't have to reset them all every time there's an update. In fact, during an update we are asked if we want to import settings etc from IE or don't import anything, but no option to import from the outgoing FF!!!!
Many moons ago Firefox was a breeze now it's become a nightmare!

Support to disable "Tabs on Top" has been removed from Firefox 29 and later and toggling the browser.tabs.onTop pref to false on the about:config page is no longer possible.
You can look at the Tabs On Bottom or the Classic Theme Restorer extension to restore this functionality.
* https://addons.mozilla.org/firefox/addon/tabs-on-bottom/
*https://addons.mozilla.org/firefox/addon/classicthemerestorer/
You can move the tabs to the lower position just above the browsing area without using an extension with code in userChrome.css as basically you only need to give the Tab bar a higher -moz-box-ordinal-group value (most toolbars have a default -moz-box-ordinal-group:1 to show them in DOM order).
Add code to the <b>userChrome.css</b> file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#TabsToolbar { -moz-box-ordinal-group:10000 !important; }
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
* Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
* Use a plain text editor like Notepad to create a (new) userChrome.css file in this folder (the names are case sensitive)
* Paste the code in the userChrome.css file in the editor window
*Make sure that the userChrome.css file starts with the default @namespace line
* Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Can you buy the new ipad that is carrier unlocked?

can you buy a carrier unlocked "new" ipad?

Fred*M. wrote:
Appl3l0v3r-
I have a WiFi-only iPad, so do not know what I'm talking about.
According to one source, only the US AT&T version can be used with SIMS from carriers in other countries. But you can get one that is universally compatible if ordered from Apple as 4G with no carrier specified.
Perhaps someone with a more reliable source can shed light on this. Or you can contact Apple directly!
Fred
iPads are not carrier locked. All new iPads 3G/4G have sim slots and will work with foreign sims. Wifi-only iPads do not have sim slots, for obvious reasons, no 3G or 4G capability.
Here are the specs from the most reliable source. http://www.apple.com/ipad/specs/ What is it that is not clear?

Can you use the new iMac with FCS.

This is one of those a friend of a friend of a friend told me this. His friend, who shoots video that's shown on a local access channel, just bought the latest iMac. I don't know what this person's set up is or what kind of equipment is, but he claims that he might have to upgrade his cameras because he can't import the footage. I'm interested in investing in the new iMac but hesitate because I do a lot of amateur video work (weddings, birthday parties, etc.) Anyone heard anything about this? By the way, I use a two year old HD Sony video camera and use FCS 7. All video is stored on an external hard drive.

The current 27" iMac's with Thunderbolt will run the whole suite of Final Cut Studio apps just fine. The catch will be your external Scratch Drive. Until Thunderbolt drives ship in a couple of months, you're stuck with FW800, which barely cuts it for serious HD work. Thunderbolt will change that.
One option is to get the configuration that has both an SSD and a 1TB 7200rpm HDD drives in it. The SSD would be your OS drive, the HDD your Scratch Drive. That would work fine.
As for professionals, I teach them, guys from huge cable news networks, who've been using FCP since v.1. I'm amazed how many of them walk away even after the 1st day of class with whole new workflows. You never stop learning in any profession. The day you do, you're out dated.
The model of Mac you use has nothing to do with your ability to import footage. The version of FCP you use CAN affect that a great deal, though.
Specifically what make/model camera do you plan to be using for this work? BTW, weddings and events are a very profitable niche profession. I have friends who make good livings for years doing only that.

Can you put the new iworks on a ibook g3?

Similar Messages

Maybe you are looking for