Can you PXE Boot WindowsToGo 8.1?

Is it possible to PXE boot WTG across the network? We have PC diagnostics software that exercises computer hardware we want to run on computers all over our network. We prefer to PXE Boot WTG and run this application (Passmark BurninTest). The version of
Passmark BurninTest we want to run supports WTG but we dont want to have USB sticks all over our production floor.
Thanks,
Todd

Is it possible to PXE boot WTG across the network?
Hi Todd,
As we all know, a Windows To Go workstation is used when a user inserts the Windows To Go drive into a USB port and starts the host computer, it is based in the USB drive and we can consider that the workstation is stored in the USB.
While as I know, PXE boot obtains IP automatically via DHCP server when the target machine is booted, then the DHCP server provides information about the location of a TFTP server and boot image, target client contacts the TFTP server for
obtaining the boot image, then execute it. so the boot image is stored on the server, it's different from a Windows To go workstation, so I think it is impossible to PXE boot Windows To Go.
Regards
Yolanda Zhu
TechNet Community Support

Similar Messages

  • Can't PXE boot Windows 8 models

    We load the PCs with our own OS image as they come in. The process works off a PXE (network) boot image.
    We recently started ording the same X230s, only with a Windows 8 license. Lenovo indicated that there should be no changes needed with our image.
    However, we can not PXE boot these machines. We shut them down and bring them back up with an F12 on the bios splash screen and select PCI LAN.
    We get a message saying >>Start PXE over IPv4
    It hangs there a while, then tries IPv6, then goes back to the boot device ment.
    We got a solid green and a flashing yellow light on the network connector. And we've PXE booted off of this connection many, many times
    What are we missing?
    Thank you.
    Solved!
    Go to Solution.

    Hey there DOTJKO,
    I've seen over on another thread, that they were having the same issue. They were able to get the PXE Boot process to finally go by:
    1) Go to BIOS
    2) SECURITY tab --> Secure Boot --> set SECURE BOOT to [DISABLED]
    3) Go to STARTUP tab --> UEFI/Legacy Boot --> set to [BOTH]
    Hopefully this assists you in getting those X230s loaded up with your image. Good Luck, and keep us posted on your progress.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • Can you dual boot lion with an older verion of Mac OS?

    Can you dual boot Lion Os with and Older version of Mac Os (Snow Leopard?) So one can rum Power PC apps until they are upgraded?

    You can dual boot if your machine originally came with an older OS version. No Mac can boot from an older version than the one it came with - notable exceptions are if the machine was built right around the time of the new OS release; in that case, it would depend on the machine and OS builds - it may or may not be possible.
    So the important question here is: did yours come with Lion preinstalled? The answer is most likely: No. Or Snow Leopard? The answer would be: Yes.

  • Can't PXE boot a Surface Pro 3 after already successfully imaging it

    hey guys. To try to eliminate a lot of the initial question that come up with this issue, I figure I will start with established info.  Our SCCM environment is healthy, and all images, drivers and apps are distributed to all of our DP's. We can image
    PC's and laptops with no issue at all. We use network PXE booting.  Using a 64 bit boot image. Needed drivers are injected into the boot image. Firmware on the Surface was updated.  Using the Surface NIC dongle. THis dongle was only used to image
    this Surface Pro 3 tablet one time. There is no record of the MAC of the dongle in SCCM since I deleted the Surface out, to make it an unknown again.
    So, with a lot of trial and error, I was finally able to get this tab to PXE boot, and then successfully image. Was testing out the new windows 8.1 image I had built.
    Since it ewas successful I wanted to add all of our apps to the TS and test them out in imaging. Well, I can no longer get this thing to PXE boot. It shows trying to Start PXE over IPv4, then just skips to IPv6, then boots up into windows.
    I have delted the secure keys form ther BIOS, then reloaded them.  I have tried hte full shut down method (Holding Volume Up and Power for 15 seconds, then waiting for 10 seconds or longer, then trying to PXE boot. I am getting a valid connection fro
    mthe dongle.
    Nothinhg I try works. Its tries to PXE boot over IPv4, but never gets there.  But I can PXE boot any of our PC's or Laptops,m so its just an issue with this damn Surface Pro 3.
    ANy advice?

    So I finally got our server guy to enable the logging and get that smspxe.log file to be accessible. So here is the info from the log, when I attempt to PXE boot the Surface. I see the last 2 lines where it ignores the request, I just don't know why its
    ignoring it.
    PXE::CNotifyTimer::TimerSignalFunc SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::ProcessTimer SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Potentially missed device 50:1A:C5:FE:D6:E9 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Cleared Old Devices: 1 / 1 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CBootImageManager::PerformMaintenenceTasks SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CBootImageManager::PurgeOldImages SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Purging old images: 0 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::Init SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::CancelTimer SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::RegisterTimeout SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    [172.028.000.223:67] Recv From:[172.028.011.002:67] Len:347 1ad0230 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 1=DHCPDiscover
        Type = 57 Max DHCP Message Size: 05b8
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ProcessMessage: Context:0241DF40  dTime:0 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: DHCP Discover received. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    [172.028.000.223:67] Recv From:[172.028.011.003:67] Len:347 159d1f0 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 1=DHCPDiscover
        Type = 57 Max DHCP Message Size: 05b8
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ProcessMessage: Context:0241DE50  dTime:0 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: DHCP Discover received. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Decompression (zlib) succeeded: original size 148, uncompressed size 298. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    MP_LookupDevice succeeded: 0 1 0 1 0 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: device is not in the database. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Getting boot action for unknown machine: item key: 2046820352 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Decompression (zlib) succeeded: original size 148, uncompressed size 298. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    MP_LookupDevice succeeded: 0 1 0 1 0 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: device is not in the database. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Getting boot action for unknown machine: item key: 2046820352 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Decompression (zlib) succeeded: original size 409, uncompressed size 950. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>c70485df-9130-4b41-b61b-6c9e11b2f69a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="10020125" OfferIDTime="4/2/2015 11:12:00 AM" PkgID="100000D0" PackageVersion="" PackagePath BootImageID="10000087" Mandatory="0"/></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client Identity: c70485df-9130-4b41-b61b-6c9e11b2f69a SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: SMSID=c70485df-9130-4b41-b61b-6c9e11b2f69a OfferID=10020125, PackageID=100000D0, PackageVersion=, BootImageID=10000087, PackagePath=http://JAG-SCCM-01E.jonesapparel.com/SMS_DP_SMSPKG$/10000087, Mandatory=0 SMSPXE 4/14/2015
    3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: found optional advertisement 10020125 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ============> Reply to client (DHCPDISCOVER): SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    DHCP message:
     Operation: BootReply (2)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 0
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 172.028.000.223
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 2=DHCPOffer
        Type = 54 Server idenitifier: 172.028.000.223
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 60 ClassIdentifier: PXEClient SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    <============ SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Decompression (zlib) succeeded: original size 409, uncompressed size 950. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>c70485df-9130-4b41-b61b-6c9e11b2f69a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="10020125" OfferIDTime="4/2/2015 11:12:00 AM" PkgID="100000D0" PackageVersion="" PackagePath="xx
    BootImageID="10000087" Mandatory="0"/></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client Identity: c70485df-9130-4b41-b61b-6c9e11b2f69a SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: SMSID=c70485df-9130-4b41-b61b-6c9e11b2f69a OfferID=10020125, PackageID=100000D0, PackageVersion=, BootImageID=10000087, PackagePath=http://JAG-SCCM-01E.jonesapparel.com/SMS_DP_SMSPKG$/10000087, Mandatory=0 SMSPXE 4/14/2015
    3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: found optional advertisement 10020125 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ============> Reply to client (DHCPDISCOVER): SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    DHCP message:
     Operation: BootReply (2)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 0
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 172.028.000.223
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 2=DHCPOffer
        Type = 54 Server idenitifier: 172.028.000.223
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 60 ClassIdentifier: PXEClient SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    <============ SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    [172.028.000.223:67] Recv From:[172.028.011.003:67] Len:359 1acbeb0 SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    [172.028.000.223:67] Recv From:[172.028.011.002:67] Len:359 15a41f0 SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    ============> Received from client: SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 3=DHCPRequest
        Type = 54 Server idenitifier: 172.028.000.015
        Type = 50 Requested IP: 172.028.011.052
        Type = 57 Max DHCP Message Size: ff00
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 3=DHCPRequest
        Type = 54 Server idenitifier: 172.028.000.015
        Type = 50 Requested IP: 172.028.011.052
        Type = 57 Max DHCP Message Size: ff00
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    <============ SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    Ignoring req from [172.028.011.003:67] Dest Server:[172.028.000.015] SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    Ignoring req from [172.028.011.002:67] Dest Server:[172.028.000.015] SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)

  • Can you install Boot Camp on an SD Card?

    Rather than installing your Boot Camp partition on your Mac's internal drive, can you install it on an SD Card instead? That way you could put the SD Card into any Mac, and boot into Windows.

    I too would like to install a bootcamp partition on an SD card so that I will not loose a huge chuck of my internal drive to Windows, a system I need very rarely (this is important for all users of SSHDs, where internal storage space is precious).
    If it is not possible to create a bootcamp partition on an external SD card, how about installing Lion first on that SD card, booting from the SD card, and then creating the bootcamp partition on that card. I would think that Lion's disk utility would consider the SD card as the internal disk, and so should make the partition and allow the installation. Large fast SD cards are not cheap, but I would think that this would be an option for those of us with limited internal storage space.
    Has anybody tried this option?

  • Can you reverse boot camping your device?

    Hi there,
    I am thinking of dual booting my device to windows 8 for university and I would like to know if it is possible to reverse the dual boot if I am not entirely happy with it?
    Can you entirely delete windows 8 off the mac or does it stay on there?
    Thanks.

    Bootcamp is (at least was when I tried it) only a partitionning tool. So if you're tired of your other os, you'll be able to recover wasted space whenever you want.
    If you don't need windows for hard work, you may consider virtualisation.

  • Can you run Boot Camp and Fusion at the same time?

    Hi,
    I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
    I guess Leopard might make this all obsolete, but until then .....
    ... Flash Gordon

    You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
    Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
    You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

  • Can you dual-boot arch linux with Windows 7 ?

    Here is my current dilemna; I have Windows still on my netbook for the only reason that I use it for gaming .
    Other than that I have Linux Mint dual-booted with it .
    Now my question is, can I just instruct arch to install into the already existing linux partition, formatting it and making it it's home, or do I have to delete it, thus rendering my computer inoperable until I successfully dualboot arch with it ? o_O
    Or should I take a different approach altogether, and triple boot my netbook with arch, mint, and windows, and then from there delete the mint partition and allocate the free space accordingly using easeus partition master (another reason I still have windows) ?
    Please help . D:
    PS. I HATE Windows but only kept it because apparently not everyone shares the Linux view of technology . >.>
    Last edited by AstarothMastemaRavenclaw (2011-02-06 16:42:35)

    if youre happy with your partition layout u can just install arch ofc.
    while installing you will be prompted to select mount points and create filesystems ( you can skip the partition step )
    select your current / partition for, well, /
    and /home for.. /home.
    the installer will then create new filesystems there (formatting those partitions) and set mountpoints

  • Can you install Boot Camp on a Pegasus2 Logical Drive?

    Trying to plan my upgrade to the new Mac Pros and I'm wondering whether it's possible to install Boot Camp on a logical drive located on a Promise Pegasus2 Thunderbolt enclosure? Ideally I'd be setting up a series of logical drives on a Pegasus2 (2 to duplicate existing drives in my current Mac Pro, 1 for Time Machine, and 1 for Boot Camp) but I can't seem to find out whether Boot Camp partitions are supported...

    I too would like to install a bootcamp partition on an SD card so that I will not loose a huge chuck of my internal drive to Windows, a system I need very rarely (this is important for all users of SSHDs, where internal storage space is precious).
    If it is not possible to create a bootcamp partition on an external SD card, how about installing Lion first on that SD card, booting from the SD card, and then creating the bootcamp partition on that card. I would think that Lion's disk utility would consider the SD card as the internal disk, and so should make the partition and allow the installation. Large fast SD cards are not cheap, but I would think that this would be an option for those of us with limited internal storage space.
    Has anybody tried this option?

  • Can you run boot camp on an external HD for your Mac?

    Hello,
    I have a 500GB external Drive that I was thinking about doing boot camp on it if it would work to run Windows on it.
    Sean

    Basically, no. You may want to use a product such as Parallels Desktop.
    (28928)

  • Nexus 5000 - 7000 can you network boot or service config ?

    Hi All
    Just writing up a security doc which has one version for IOS and one for NEXUS.
    Cant find any info about the nexus having a service config or a boot network 
    capability .
    Does anyone know how this would happen on a Nexus ?
    Steve

    Posting as an update to this issue. I've noticed it may not be the Flash card as I previously thought. Getting a chance to get inside the system when booting, I noticed two LEDs would turn on and stay solid on the motherboard.
    One is labeled SEQ B FAIL, the other SEQ C FAIL. I assume these are for POST or something similar, but this points me to believe now that the motherboard itself is fried? If there's any way to fix this, please let me know. Thank you.

  • Can you dual boot Windows XP on the current Mac Pro?

    I'm currently interested in purchasing a new Mac Pro but want to dual boot Windows XP to play older games. Is this possible with the current Mac Pro's software and hardware?

    The current version of OS X only allows bootcamp to be used with Windows 7 and above.  You would have to have a version of Snowleopard to install XP in bootcamp.
    You "could" use a 3rd party program like VMWare Fusion, or Parallels desktop to install an XP virtual machine.  There was also a free Virtual Machine program for Mac, but the name escapes me.
    HTH

  • Can you cold boot an iMac?

    I'm frozen trying to install lion so I want to shut down. How do I?

    That will shut down your Mac.
    It also may leave your Mac disk drive in a totally unusable state.
    I hope you have a back up.
    Allan

  • Formatting the encrypted hard drive or intalling OS again with PXE boot can change TPM owner password file?

    Hello,
    1) I realized that when MBAM bitlocker encryption start both Recovery key and TPM owner password file are send to MBAM server. If we change the computername of the notebook, we can find out Recovery key from MBAM server with the KeyID as we can read it from
    computer screen, but we can not find out TPM owner password file with the existing new computername information from MBAM server, so we have to know old names of all computers but it is impossible. So we have to do decryption and clearing TPM than we
    can again encrypted it with its new name. is it right?
    2) We will going to deploy mbam encryption to our notebooks. But sometimes when a person quit the job his notebook can given to another person or new employee and based to our procedure when a notebook will given to another user it should installed
    OS again with PXE boot. I would to know will it be enough to installing with this method again with a diffrent computer name or should I firstly clear its TPM than install OS with PXE to keep TPM owner password file missing as item 1?
    I hope i can explain what i mean :)
    Regards,
    SibelM

    I would suggest you to first decrypt the laptop and then follow the process:-
    - Clear the TPM
    - Encrypt the type.
    - Check for the encryption behavior.
    Cause I have found on some model that if the OS drive is encrypted, PXE boot fail on that machine even though I also did a direct PXE on an encrypted machine with clearing the TPM.
    TPM ownership password is a hash file that gets generated with a set of algorithm. SO each time when you PXE boot, by clearing the TPM, the TPM hash password for the TPM will change. This has been done for security measures.  
    Gaurav Ranjan

  • Problems PXE booting Gen 2 Virtual Machines after Upgrading to Windows Server 2012 R2

    My Current Setup: 
    I have two virtual machines set up with Hyper V on my Windows Server 2012 Server.
    VM1: Configured to boot from an ISO file and runs Clonezilla server. 
    VM2: Configured to PXE boot using a legacy network adapter, and with a passthrough 250Gb hard disk. 
    These two VMs are connected to an external Virtual Switch, which allows physical machines to PXE boot to the Clonezilla server. 
    For the past few months I have been using this setup for two purposes:
    1. To clone physical machines to the Clonezilla virtual server (as a backup).
    2. To restore those image to the second VM if I find that need to get access to the files on the original image.. 
    This has worked perfectly, except for the fact that the speed of the legacy network adapter on the second VM (which is required to PXE boot) is very slow. But I know this is because of the limitations in how the legacy adapter works... 
    Now my problem:
    I found out that Gen 2 VMs allow you to PXE boot without having use a legacy network adapter, allowing me to image back to the VM faster. So I upgraded the Server to Server 2012 R2 . I then created the same two virtual machines on the R2 server. I can still
    PXE boot the Gen 1 VM to the Clonezilla Server but I cannot get the Gen 2 VMs to PXE boot properly. They get an IP address from the Clonezilla Server but then just stop with the following screen. (note: I have disabled the Secure Boot). 
    Are Gen 2 VMs unable to pull down images from anything other than a WDS Server? 

    Hi J,
    >>Unfortunately WDS is not a solution for us as it is dependent on the PC being part of a domain
    If you would like to make the client not join to the domain, please check the box before “Do not join the client to a domain after an installation.”  In addition, make sure not to set the client to the domain in the unattend file and do not prestage
    the computer in AD. "
    It is quoted from following thread :
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/1026c3a9-0a10-4a58-a48f-5391659a96c8/wds-set-unattend-file-for-workgroup?forum=winserversetup
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Open Error 5

    My macbook recently went through a hard drive upgrade. Mac Unibody mid 2009, 2.26 GHz, originally 160 GB HD and 2 GB RAM. My mac now has a 1 TB HD. I had it installed about 2 months ago and it has been working fine. All off a sudden my mac would not

  • Bars & Jutter

    Sorry if this question doesnt make sense.  Im so confused I dont even know what day of the week it is So Ive had some problem with bars being at the sides of my video, I read the forums and realised the project/video/output settings needed to match. 

  • How to create a mp3 playlist compatable with the media server (storage link)

    Hi, I have setup the wrt160nl wireless router with the latest Firmware Version: 1.00.01 B17. Everything is working great. I can browse the artists, albums, song titles etc from my usb hard disk. What isn't working is the play lists. What format does

  • The CompileSPL.exe in the Lync Server 2013 SDK can't compile the application manifest file

    My windows server version is 2012 standard, I deployed the lync server 2013 to my environment, and ran the lync server 2013 SDK on the front end pool. Today, I wanted to compile a application manifest file, but I got the warning that this app can't r

  • OS X Mountain Install File

    after downloading os x mountain lion from AppStore, I can't find the image file on my iMac to install it.  I have also mistakenly deleted the OS X Mountain from my purchased list in the AppStore application.  1. Where can I find the downloaded image