Can you read/write to Mac partition from Windows 7 partition with bootcamp?

Hi there. I am about to take delivery of a new Air and want to install Windows on it. As accessing both simultaneously isn't important to me, I don't mind using boot camp and would like the performance gains (if there are any?) of booting straight into either.
The question is: would I be able to, from Windows, access and edit (have full access to) files stored on the Mac partition?
Furthermore, does anyone know whether I could run itunes on both using the same set of files (i.e. exactly the same itunes whether in OS X or Windows?).
Thanks very much for your help. I have heard contradictory things so wanted to see what the real answer was!
Thanks,
Tom.

iTunes has to be somewhere you can write. There are some tips on iTunes probably in the devoted forums.
But writing to Mac partition (HFS+) requires 3rd party driver. Same for writing to NTFS from Mac OS.
I would not recommend MacDrive8 for allowing Windows to write to Mac HFS, but that is and was the first to do so. Paragon-Software has been creating some file system drivers for Windows, Linux and now Mac to go both ways. Most of their products are in the backup & recovery and partitioning area.
Apple has added read-only feature to allow accessing HFS but the feature (and it is not really a service or driver that you can turn on/off or choose to not install, it is part of the Boot Camp package) has been known to need to be renamed/deleted. Not always but will sometimes trigger BSOD. Maybe reading a file with a file name? doubt it but I rename "AppleHFS" and "AppleMNT" so they don't load or function in Windows 7.
http://www.paragon-software.com/
http://www.mediafour.com/updates/macdrive

Similar Messages

  • Can't boot back to OS X from Windows 8 with Bootcamp

    Today I booted to Windows 8.1 using Bootcamp. It was going great until I tried to go back to OS X. Apple's instructions said to just search for Boot Camp in Settings and do it like that, but it didn't show up in the results. I looked for a while, and I couldn't find it anywhere. Fortunately, I could still get back to OS X by holding option when I restart, which is a nice workaround, but I'd still like to figure out why it isn't working the way it's supposed to. Any ideas?

    hold down option key during bootup and choose if you want to boot into osx or windows

  • Can you read books on Mac laptop that were purchased on iPod touch?

    I bought a few books through ibooks on my Ipod touch, but there are some forms that I want to print and recipes that I would like to see in the bigger screen of my laptop, but although they show as purchased on my laptop I cannot open them to read them.

    planet dumbo wrote:
    can you read books purchased on itunes after downloading them on a mac computer osx
    If you wish to read books on your Mac, get the Kindle App for Mac, and purchase books from the Amazon Kindle Store. 
    In contrast to the restrictive iBook format, Kindle books can be read on Mac, iOS devices, and many other platforms.

  • HT5544 Can you read ibooks on mac pro laptop?

    If I download the ibooks app to my mac pro laptop, and then purchase an ibook through itunes, can I read it from my mac pro laptop or do I need an iPad, iPod or iPhone?

    Hi rosemaryfromdelta,
    No, you cannot read iBooks on a Mac. However, you can read Kindle books on a Mac. Download the free Kindle application, set up a Kindle account on Amazon, and purchase your e-books through the Kindle store on Amazon.
    P.S. - if you do ever get an iPad, iPhone, or iPod, you can also download the Kindle app to them, and you will be able to read any books you have purchased on those devices as well....
    Hope that helps!
    Cheers,
    GB

  • Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

    I read the thread Widows 7 printer
    HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
    as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg). 
    Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
    of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
    XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
    Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
    Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
    NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
    attempted to install the driver, I got the same message stating:
    "The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
    Why aren't there x64 drivers?
    During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
    Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
    Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
    Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
    I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
    Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
    thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
    Andrew*
    P.S. I was advised to come for help here from
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Cannot access MS office files on OS X partition from windows partition running bootcamp s

    I've installed a trial version of Microsoft Office 2010 on the Windows partition of my iMac.  Microsoft Office 2011 for Mac is installed on the OS X partition. When I try to open a file on the OS X partition an error displays saying the file is corrupted or the server is not available.  If I transfer the file to Windows it opens fine.  Other types of files such as a pdf or photo formats open fine with the appropriate Windows programs accessing the OS X partition.  Is this a limitation of the trial version or a basic limitation of Office for Windows?  Office for Mac can open a file on the Windows partition with no problem.
    Thanks for any help.

    MSOffice for Windows usually create a temporary hidden file in the same location as the file you open.  Since Windows can't write to the Mac partition, I'm wondering if that's the reason for the error.  (Anyone who knows for certain, correct me if I'm wrong.)
    OSX can natevely read and write FAT32 and read NTFS so I'm assuming that the Office for Mac development team made allowances for opening from a read-only NTFS partition (e.g.: Boot Camp partition.)  Of couse, if your Boot Camp partition is FAT32, then there would be no issue with creating any hidden temporary files.

  • I have an issue in my 13'' Mac after installing windows 7 with bootcamp I lost my mac journal partition

    Hi,
    I use the bootcamp to install win7 on my 13" macbook pro .. after the installation I got throw windows and try to change the windows partition size
    things gone wrong and I got my mac partition lost ! and while trying to got it throw the recovery Disk utility show that it turns to fat partition !
    so I couldn't do any thing with it ! couldn't reinstall the lion again .. the only way is to reformat it !! and this will make me lost all my things in it !
    So I just need any solution or software to boot from it and converting or editing the partition file system to be journal not fat
    by the way also in windows can't open the partition even it shows that it Fat format !

    my dear it's fixed.
    the problem is that  I did not hold down  the alt option key so solution is just to hold down the alt option  key for a while.
    thanks for your response

  • Can you use disk utility to resize the windows partition in bootcamp

    I've successful done everything for bootcamp, but I think I made the partition size for windows too small. I read you can use the disc utility on mac to resize it, is that true and does it work fine? I haven't installed anything on the windows part yet so it's not like I need to worry about losing anything

    No. If you do then neither your boot loader nor Boot Camp Assistant will be usable. You should use a tool like Paragon Camptune X 10 to make resizing easy.
    Boot Camp Assistant would require you to first remove the partition then create a new one.

  • HT3986 how to write on mac drive from windows

    I installed windows 7 64 bit through boot camp. After that I found that I couldn't create folders or copy files to my Mac drive while I am in windows. Is there any solution?

    I have not tried it yet even though I will need to myself, but MacDrive by mediafour (www.mediafour.com) should do the trick.  Sure hope so anyway for both our sakes

  • Can I set up my mac Keyboard in windows 7 with a dongle bluethooth?

    my pc computer does not have bluetooth! I had a dongle bluethooth USB and i trying to use my mac keayboard!

    You will need to enable file sharing in System Preferences
    as well as setting up sharing and permissions for the
    directories that you want shared.  You may also want to
    setup a non-administrative user or allow limited guest
    access.  The user would require entering a user name and
    password to make the connection, but would allow remotes
    to change files, if set up tat way.
    As for serving iTunes media, better to post in the iTunes forum.

  • HT3986 installing windows 7 with bootcamp It doesn't install, telling me that the partition made by bootcamp is not formatted in NSFT. What to do now?

    after having made a partition for windows 7 with bootcamp, it couldn't be installed with the message that the partition needs to be formatted in NSFT.
    What to do now?

    Start again and follow the Bootcamp installation instructions http://www.apple.com/support/bootcamp/. You can print he instructions from within Bootcamp Assistant.

  • Is it possible to resize a mac partition from windows?

    Here's what's going on. I originally wanted to use Disk Utility to do this, which is clearly the easy way to do things, but my computer is so slow that Disk Utility immediately becomes unresponsive upon wanting to resize -any- partition. The windows side works fine though, it isn't slow as crap. Is there a way to resize the mac partition from windows (HFS+)? Any possible way? Even crazy ones? I'm open to suggestions.
    Oh yeah, and in case you want to know...my Mac Mini just randomly started getting really, really slow, so slow in fact, that now my old iMac from 1999 is faster (it doesn't even have ANY RAM!). I tried resetting the PRAM/NVRAM, multiple times, booting into safe mode takes forever, but I left it for awhile and it finished. Almost worked, the finder showed up quicker than usual, but then it reverted back to it's slow self again once I opened Disk Utility. I tried booting into single user mode and typing /sbin/fsck -fy, and it's so slow, that it couldn't even do that! It got stuck at checking libraries or something, for hours, and i could type things in still, but it wouldn't recognize any commands (ie fsk - fy). I also cannot replace the RAM because it is an older mac mini and those things are hard as f*** to repair, trust me, i've tried. The weirdest part of all of this has to be that this is the computer that we DON'T download many apps onto, so it most likely isn't bloatware, adware, a virus or something else. We download most stuff to our MacBook, and go to the sketchy websites on it as well (it really should be the other way around, the mac mini would be around 3x less expensive to replace, it's just that it's the family computer). And that's always slow, but this surpassed it (btw, the laptop is a year or so older). I do not have the installation disk.
    Can someone help? Mainly about the first thing...please. The second thing is hopeless, I will need to get a new computer pretty soon, and these macs don't last as long as they used to I guess, we'd most likely get a quality Windows PC to replace it, this has been a disappointment. I'm just trying to get a little more life out of it with Linux, maybe a year or two. That's what i've done with my old iMac. Runs GREAT. Especially for a 13 year old computer. The thing is, my folks don't want me to completely eliminate the mac partition even though it's virtually unusuable.

    I'm not really understanding what the end goal was. But in case anyone else comes across the thread, neither the built-in Windows volume resizing utility nor any 3rd party Windows resizing utility should be used to resize either the Windows partition or the Mac OS partition. Invariably they all manipulate the NTFS volume in such a way that the secondary GPT is corrupt, the primary GPT is rendered invalid, and only correctly alter the MBR. It's a recipe for data loss.
    Conversely, while Disk Utility can resize a Mac OS volume, it cannot resize an NTFS volume. With Lion and Mountain Lion, upon using Boot Camp Assistant there are already four partitions: EFI System, Mac OS, Recovery HD, and Windows. There is no more room for a fifth partition in the MBR partition scheme, and if you try to add one, Disk Utility will apparently let you and render Windows unbootable (because Disk Utility adds the fifth partition to the GPT, but can't add it to the MBR, and instead removes the hybrid MBR needed for Windows support and replaces it with a PMBR.)
    So in effect this is not to be done except with 3rd party utilities.

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • How to read/write a binary file from/to a table with BLOB column

    I have create a table with a column of data type BLOB.
    I can read/write an IMAGE file from/to the column of the table using:
    READ_IMAGE_FILE
    WRITE_IMAGE_FILE
    How can I do the same for other binary files, e.g. aaaa.zip?

    There is a package procedure dbms_lob.readblobfromfile to read BLOB's from file.
    http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lob.htm#sthref3583
    To write a BLOB to file you can use a Java procedure (pre Oracle 9i R2) or utl_file.put_raw (there is no dbms_lob.writelobtofile).
    http://asktom.oracle.com/pls/ask/f?p=4950:8:1559124855641433424::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:6379798216275

  • Cannot access Mac OS Partition from windows 8 running in boot camp

    So I installed Windows 8.1 Pro through Boot Camp but I can't access the Mac OS partition from windows even though boot camp partition shows up while I'm on Mac OS. I have installed all the drivers from apple but still it didn't work. Then I downloaded Paragon HFS+ which was free for windows 8 and 8.1 thinking that this would solve my problem. The instructions told me to change the drive letter for mac partition from disk management by right clicking the drive pressing "change drive letter and path" button. But the "change drive letter and path" key in grey color and I can't press it. Can somebody please help?

    Here you go
    1) diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *750.2 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         650.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                99.0 GB    disk0s4
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *645.8 GB   disk1
                                     Logical Volume on disk0s2
                                     AFC82671-CBAA-4338-BAEC-7D272EC755B1
                                     Unencrypted
    2. sudo fdisk /dev/<BootCampDisk> (from 1 of the form disk0)
    i typed this: sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AC 1023 254  63 - 1023 254  63 [    409640 - 1270110576] <Unknown ID>
    3: AB 1023 254  63 - 1023 254  63 [1270520216 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [1271791616 -  193355776] HPFS/QNX/AUX
    sudo fdisk /dev/disk1
    /dev/disk1: Resource busy
    3. sudo gpt -vv -r show /dev/<BootCampDisk>  (from 1 of the form disk0)
    sudo gpt -vv -r show /dev/disk0
    gpt show: /dev/disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 1465149167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1270110576      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      1270520216     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1271789752        1864        
      1271791616   193355776      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1465147392        1743        
      1465149135          32         Sec GPT table
      1465149167           1         Sec GPT header
    I didn't quite understand the 4th step. Sorry

Maybe you are looking for

  • Issue in packing Weblogic portal domain

    Hi Guys, I am trying to pack my domain from HOST A using command : pack -managed=true -domain=C:\Oracle\Middleware\user_projects\domains\Edlink -template=C:\Oracle\edlink.jar -log=c:\oracle\edlink.log -template_name="template_name" and wants to unpac

  • Dreamweaver MX 2004 compatibility with latest versions?

    Dreamweaver MX 2004 compatibility with latest versions? I have templates in a old Dreamweaver MX 2004 and want to update my software. Will I need to go in steps to a version a few years back and then to current?  Or can I go all the way to current? I

  • Can we order the UC7.0-KP-NFR?

    Dear all, Our BD manager told me that the Cisco NFR program only allowed the partner to purchase the hardware and software once a year. And the total quotation must between the minimum CPL $2300 and maximum CPL $450,000. We have purchased the NFR dev

  • How to disable imessage without the phone

    My iphone 4 recently just stopped working and I purchased a new Galaxy S4 and cannot recieve messages because they are still going to my iphone 4.  I have already unregistered my iphone with apple and on itunes.  There is no sim card in the iphone an

  • Problem with context root

    Hi, i have a big problem with the context root in jdeveloper 10 g, for this i can´t found a file using "getClass().getResourceAsStream", i don't know why?, i think that is the context root, the project uses a class WebParametersServlet extends HttpSe