Can you recommend some tools that can parse XQuery?

I need a tool that can parse an xquery and manipulate the internal blocks of it. Can somebody please help me? Thanks!

Back in the day I used to use this: http://www.analogx.com/contents/download/audio/tagm.htm (freeware).
Depending on how large your collection is, the program might run slower, still, it was a good program for what it does.

Similar Messages

  • I guess the problem come from me or I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?

    I guess the problem come from me but I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?
    One more thing. I just update my iphone that my boss gave to me but it seems to be like it giving me some trouble. My iphone was updated not too long and was successful. I try to lock into it and it telling me emergency call. I plug it to my itune and it telling me that the sim card is not valid or supported. So I inserted my sim card that I usually use to call and it still saying the same. Please help me get into it.

    And as far as paying for phone support, here are a few tips:
    If you call your carrier first and then they route you to Apple, you usually don't have to pay for phone support.
    If you are talking to Apple and they ask you to pay a support fee, ask if you can get an exception this time.  That usually works once, but they keep track of the times you've been granted such an exception.
    If you still end up paying the support fee, that fee only applies if it's not a hardware related issue.  In other words, if it can be fixed by just talking over the phone and following Apple's instructions, then the fee applies.  But if your device is deemed to have a hardware failure that caused the issue, then the fee should not apply, and you can ask for it to be waived after the fact.
    This forum is free, and almost all of the technical support articles the Apple tech advisors use are available on this website.  Literally 99% of what they can do over the phone is just walking you through the publicly available support articles.  In other words, you're paying the fee to have them do your research for you.  It's like hiring a research consultant to go look stuff up in the public library so you don't have to.  You're capable of doing it; you'd just rather pay someone to do it for you.
    It's like Starbucks.  You know how to make coffee.  Everyone knows how to make coffee.  And Starbucks coffee isn't any better than what you could make at home for far less.  But you want the convenience.  So you're really paying a convenience fee.  Milk is more expensive at 7-Eleven than it is at the grocery store... because it's a convenience store.

  • Can anyone recommend a programmer that can fix iWeb for Internet Explorer?

    Can anyone recommend a programmer that can fix iWeb for Internet Explorer? I had one experienced source from GetaFreelancer.com who did a 17 page fix for $25. He would have done commented code for $40 so I could do the fixes myself afterward but he is not available right now. Guru.com yielded no comparable sources. Elance has a $50 minimum. All the other bids were in the hundreds of dollars without the commented code.

    The image on the right of your index page needs pulling down a bit, it looks messy covering the top banner.
    Secondly, you've changed quite a lot on your page so this makes life harder for everyone. For example, now at the bottom of the page in fireFox I see 'IP' on the line below the rest of the details, but because you changed things I now don't know whether that's because of my screen resolution or your coding. Is it still on one line for you?
    The problem with your columns may partly be based on the fact that you have a variety of span classes effectively achieving the same thing, and there are lots of unnecessary bits of code. How much of this is iWeb and how much is you I don't know. You've got an li class, a paragraph class, a written-out span class and some kind of specified bullet class all for one sentence. You only need one, maximum two of those things. Even if it's not conflicting and that's not the reason why it looks messed up, you'd do better to strip the code of all the unnecessary rubbish.
    To do this with help I recommend someone who is familiar with iWeb and has access to it in front of them. A professional programmer won't be able to help you, because they can't really tell which bits are generated by iWeb and which parts you can actually change.
    I recommend starting with a blank page and creating your columns and text without any styling other than bullets. Check it in both IE and FF. Then slowly begin to add your styling back in until you see if there's a problem. Finally, put the text on a (new) page which has your full website styling and see if there's a conflict between your page layout code and your page text code.

  • Is there some tools that can analys the informations creating by RDA?

    When we create informations using Oracle Remote Diagnostic Agent,how can we analyse it and get some advices,the only way is send it to the Oracle supporter?I mean if there are some tools?

    RDA is Oracle support tool. I don't think you can use the output file for other purpose, at least not legally.

  • Can you recommend a camcorder that is compatible with iMovie 08?

    I looked at the list of compatible video camcorders with iMovie 08, but was wondering if anyone has a strong recommendation for a camcorder that is really working well. I'm ready to buy a new camcorder, but want to really avoid any
    issues regarding conflicts with the software, etc...
    Thanks for saving me a headache.

    I like Canon MUCH better than Sony. Sony is a direct competitor of Apple and as such I think they support Apple with reduced enthusiasm.
    Canon makes excellent equipment and their technical support people always seem Macintosh savvy (They were very familiar with iMovie).
    http://www.usa.canon.com/consumer/controller?act=ProductCatIndexAct&fcategoryid= 173
    I use my Canon with iMovie 06 and iDVD 08. (and occasionally with iMovie 08)

  • Can you make a PDF that can display two languages?

    Hi, I have a need to display a PDF in two languages (I work in a hospital clinic). I want the computer to be able to display Spanish to the patient, and when the form is completed, turn the form back into English for printing so the output is readable by clerks (this form goes to people who aren't Spanish speaking for processing). I can provide both the Spanish and English versions of the form. Can this be done in real practice?
    thanks a lot guys

    Windows XP, Acrobat Pro 9.3.4, Office 2010
    Garcon's situation/request may be one where I'll be soon (I work for a medical center in a university setting), so this could be a useful thread. This Layers feature is new to me and sounds promising. However, my initial experience with implementing it has raised several usability issues (which may be due to my Acrobat version and my inexperience with this feature).
    First, you apparently can't import a foreign language (e.g., Esperanto) pdf as a layer into an English pdf and then set it so that you can only see Esperanto -- you can only toggle the Esperanto layer on or off with the English always on display. My work-around was to create a blank pdf and then import the English and Esperanto pdf file into layers. Then there's no way to set it with the default Acrobat controls so that if a user opens the file using Reader that only one of the layers is active (I don't know if it's possible with JavaScript).
    Second, if it's a multi-page document you will have to import each page separately for each language (some forms we translate into 7 different languages). That'll become tedious and also increases the risk for mistakes. Best approach here probably will be separate LanguageX/English files instead of one monster LanguageA/LanguageB/etc./English file.
    Finally, form fields can't be assigned/displayed by layer (using default Properties windows), nor will they import into a layer if your source pdf has form fields. Unless by some miracle the form fields all line up in the same spot (unlikely as one language we occassionlly translate into is Arabic), creating and positioning all the form fields may get tedious real quick. The sample form I was working with has almost 200 potential form fields across 3 pages.
    Any usability tips or links to using layers in forms will be appreciated.

  • Can anybody recommend a program that can delete ghost files in my Itunes library?

    I have a HUGE music library and really don't have that kinda time to delete these ghost files. I also don't know which are all ghost files since I have to keep clicking on each song to figure it out. Is there a program to delete these ghost files?
    Any help would be greatly appreciated.
    Thanks in advance,
    Chris

    You can use iTunes Folder Watch with its option to Check for dead tracks on startup as a way to clean out dead links. If your library contains both originals and duplicates of the same tracks only one of which is broken then you might find my script DeDuper useful.
    tt2

  • Can you recommend an iPad app to open and edit MS Excel files?

    Hi,
    I need an iPad app that would enable me to do the following with a MS Excel file:
    Import the file from Dropbox
    Edit and save the file
    Export the edited file back to Dropbox
    Can anyone recommend an app that can do the above?
    Thanks
    Daniel

    Thanks for the feedback. I have read the reviews of both apps and they are not that great. The DropBox functionality seems to work finenwith both apps.
    I want to use the spreadsheet on both my iPad and PC. The reviews of both apps mention that some reformatting of the .xls file can occur when saving it in the app. Have any of you experienced this? I will only be using the app for simple .xls files with normal/simple formulas. Nothing complicated at all. I might use it for Word files, but I have no use for PowerPoint. The only time I might use the PowerPoint functionality is if I happen to receive such a file via email. I'm still using Office 2003 with no intention to upgrade anytime soon as it is just fine for my needs.
    The QuickOffice Pro HD app is currently on sale for $11.99 whereas the Documents to Go Premium app that supports DropBox is $16.99. D2G is an universal app and QOP is not.
    Any suggestions on which app is the better one would be appreciated.
    Regards
    Daniel

  • I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

    Try CardMunch it works well for me

  • Are you aware of any software similar to ADSL Navigation Tools that can be used with in Mac?

    Are you aware of any software similar to ADSL Navigation Tools that can be used with in Mac?

    The popup message always warns to do a backup first since there is the potential of lost data if the upgrade fails.
    Sadly, your only option at this point is to restore and hope there is a backup stored from a previous sync.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • You can safely ignore some errors that fsck reports....?

    I got the following report while Verifying in DU after installing the latest Security Update 2009-001. I took every possible precaution: installed in Safe Boot from standalone download, repaired Permissions before and after, disconnected all peripherals and stood on my head.
    I repaired successfully, booted from the Disc. DU, while booted from the disc, saw the error too, so I know it wasn't a spurious error appearing only when booted from the HD. I'm wondering if there's anything here to be concerned about. I have never before had DU report the disc needed repair.
    (I also repaired a Permissions error while booted in Safe Mode, before doing any of this. This was strange, since I'd just done a Permissions repair only a few days earlier for the QT Update. I won't get into that now, since I my main concern is the Disc error, and I don't want to overload this post with too many questions).
    Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    Invalid volume free block count
    Invalid volume free block count
    ead of %@)",2)
    28212389
    28211294
    The volume Hard Drive needs to be repaired.
    Error: The underlying task reported failure on exit
    Both the Pogue, Missing Manual, Tiger, book and this KB article, report "Volume Bit Map needs minor repair" and "Invalid volume free block count " as "benign" errors, to be ignored.
    "You can safely ignore some errors that fsck reports when journaling is enabled."
    http://support.apple.com/kb/TS2028
    I've been looking into this on my own, but here's the source of my confusion: 1. The heading of the KB article says it is for 10.3.9 or earlier (the article was last modified August, 2008), but way down at the bottom, 10.4 is listed under "Products Affected." Is this just someone at Apple being sloppy? 2. Both the Pogue Tiger book p.778, and the KB article describe this as an error that can be reported while repairing using fsck. They don't mention errors reported by DU, which is how I got this error. But just to be certain, can I safely assume it would apply to errors reported by DU as well? They are, effectively, the same thing, aren't they?
    No strange sounds coming from the HD and everything seems to be fine. And no more reports of this kind coming from DU.

    OK. Thanks very much,
    My question arose because both the KB article and Pogue discuss these errors only in the context of running fsck. Since you say journaling is automatically turned off when DU does repairs, _does that, then, mean that these errors are only spurious when coming from fsck, not DU, because journaling is enabled in fsck? Journaling enabled is what causes them to appear in fsck?_ Is this why there's no mention of DU for these errors from the Apple KB article and Pogue? And does that mean that *if DU reports them, not fsck,* they are to be taken more seriously, that they are benign, meaning not very serious, but not to be dismissed completely as when they are reported by fsck?
    Yes, the errors are benign, but should not be ignored.
    I thought the KB article and Pogue were letting me off the hook completely. I see that's, maybe, not exactly the case.
    *I never ran fsck.* I did everything from DU, either booted from the HD or the Tiger Installer disc. Fsck only came up because I discovered this KB article and the Pogue excerpt, which made me think that, since fsck is essentially DU, but run from a command line, they applied as well to the errors DU found. I didn't realize that, maybe, journaling enabled in fsck was at the heart of this issue.
    As mentioned, I ran DU from the Tiger Installer disc and it repaired the error right away on the first run. I ran it twice just to be sure.
    If DU ran successfully but did not repair the problem, then run Repair Disk repeatedly until no problems are reported.
    There was no other problem, only the error DU reported, which was successfully repaired.
    DU is supposed to disable journaling before repairing the drive. But there's nothing wrong with disabling journaling manually before repairing the drive.
    Meaning I can't always assume it will? And, perhaps, it didn't this time and that's why I got the error?
    Everything seems fine now; I was just somewhat alarmed, since I didn't understand where this could be coming from. I'd already verified the disc, booted from my clone, very recently.
    Message was edited by: WZZZ

  • Can you recommend me some good books on smartform?

    I am learning smartform development now.
    But I have not any book on this subject.
    Can you recommend me some good books on smartform?
    Thank you!

    Hi
    see this and do accordingly it is very useful link for smartforms
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    for Smartforms material
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-press.com/downloads/h955_preview.pdf
    http://www.ossincorp.com/Black_Box/Black_Box_2.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://www.sapgenie.com/abap/smartforms.htm
    How to trace smartform
    http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
    http://www.sap-img.com/smartforms/smart-006.htm
    http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
    Re: Need FAQ's
    check most imp link
    http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    Subtotals - Check the link...
    Re: Subtotal with Table Node in smartforms
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Can you remove some of the Default applications

    I want to give an iPod Touch to my mother who is technically challenged and doesn't have WiFi.
    I only want the iPod functionality, not the browsers, email, maps, or any other feature.
    Is there a way to disable or remove default apps that you don't want?
    ps: I do not want an iPod classic., it''s interface is harder to learn than the touch.

    I too would like to remove some of the default apps. Personally, I find the YouTube, Stocks, and Maps, useless to me and its just a waste of icon space. And whats with the "The touch may not be for you". Seriously, if someone wants a touch but doesn't want some of the default apps, that doesn't mean the touch is not for someone. I think it would be a smart move for Apple to revise the iPod (and iPhone, if people can't remove default apps on there) so that we may remove the default apps that we don't use. It makes absolutely no sense to just "move" the app to the back if we don't even use the app. That's like saying "you may not have any use for this app, but its here because we want to force you to keep the junk we give you". And it sounds a lot like a Microsoft move for the all the Windows operating systems they have released (up to Vista, so far) forcing Internet Explorer on all its users and not allowing us to remove it because it was integrated into the Operating System. Supposedly, Microsoft is growing up and letting the user to actually disable (maybe even remove) Internet Explorer in the upcoming Windows 7. What about Mac OS X, does it force Safari on its users, like its forcing some of these unnecessary apps onto the iPod Touch? I wouldn't don't know, I don't earn quite enough money to buy myself an iMac or MacBook (and I've even heard from several people that its more expensive to get a gaming Mac than a gaming PC with similar hardware configuration). Only Apple product I own so far is an iPod Touch.
    But I will give Anna credit. Anna at least answered the question.
    The question was "Can you remove some of the default applications" and a response saying "What is your mother going to use it for? Maybe the Touch is not the right device for her." by "D'Fish'N'Seas" does not answer the question at all. The question has nothing to do with what the mother is going to use the iPod for, so don't post a response like that, its one of the reasons that causes short tempered people to flame other people.
    Ok, so since Anna answered the question that Ron asked. I have a question related to this topic, and if Ron is still wanting to remove some default apps, I'm sure he would like an answer to the question too. So, here is my question: Has anyone developed an app that would allow us to remove the default apps, or a tool that will guide us in removing some default apps?
    And preferably the app or tool be in the most legal possible way. Wouldn't want to ask for something that is illegal.

  • Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

    hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

    Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
    that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
    If that is an accurate description of the problem, consider this:
    Image 1: The original image
    Image 2: Edit > Fill with the Blending mode set to Color. White remains white
    Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
    (I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

  • I am running Firefox 3.6.24 on a Power Mac G5 Quad, OS 10.4.11. I have to run Classic. Can you recommend a browser to use since you won't be updating 3.6 anymore?

    I am running Firefox 3.6.24 on a Power Mac G5 Quad, OS 10.4.11. I have to run Classic. Can you recommend a browser to use since you won't be updating 3.6 anymore?

    Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher.
    *System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
    '''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
    *System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
    *Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
    *Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
    You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
    *Home page: http://www.floodgap.com/software/tenfourfox/
    *Developer's blog: http://tenfourfox.blogspot.com/
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Maybe you are looking for