Can you remove a date and time stamp off a photo that has already been taken?

Can you remove a date and time stamp off a photo that has already been taken?

only with Photoshop or similar software that offer some clone/heal feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Similar Messages

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • Can I remove the date and time from an image taken on my Powershot SX510 HS for printing?

    Natalie1, Once the photo is processed in the camera with the date stamp, it's permanent to the photo. The camera will not have that as a layer to turn off and on at will. It's much easier to add the date/time stamp to a shot for printing then it is to remove it. You will need some editing software such as Photoshop Elements, or Gimp (free), to remove the date/stamp. These software's can do a pretty reasonable job to remove any unwanted elements from the photo. Canon also has their Digital Photo Professional software that comes free with the camera, but it's not as easy to get the nice results of the Photoshop Elements. The change you make with these software's will remove the date/time stamp unless you only mask (layer) it. Steve M.

    Natalie1, Once the photo is processed in the camera with the date stamp, it's permanent to the photo. The camera will not have that as a layer to turn off and on at will. It's much easier to add the date/time stamp to a shot for printing then it is to remove it. You will need some editing software such as Photoshop Elements, or Gimp (free), to remove the date/stamp. These software's can do a pretty reasonable job to remove any unwanted elements from the photo. Canon also has their Digital Photo Professional software that comes free with the camera, but it's not as easy to get the nice results of the Photoshop Elements. The change you make with these software's will remove the date/time stamp unless you only mask (layer) it. Steve M.

  • How can you share music wiyh another iphone in the same house that has not been connected to a compter

    how can you share music on iphones in the same houes when one of phones has never been connected to a computer

    Hello weeshaza,
    It sounds like you are wanting to sync more than 1 device to your iTunes Library. This article will help you do that:
    How to use multiple iPhone, iPad, or iPod devices with one computer
    http://support.apple.com/kb/ht1495
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How can I delete an Apple Account someone made using my gmail That has already been verified??

    Someone used my gmail and I accidentally verified it and cannot take my email off of it.
    I reset the password so now I only have access.
    How can I delete this?

    HI,
    Just because and Apple ID email is not verified does not mean the account is not created. (usable may be another matter)
    Are you trying to Login here with the Manage option.
    This will take you to the Apple ID page and tell you if there is an Verified Email as the Apple ID and whether there is a recovery email in use.
    There is a menu on the left to sort any Recovery email and set Security Questions.
    You are most likely to need to verify the Apple ID you were trying to create.
    10:03 pm      Saturday; June 7, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Date and Time Stamp Removal?

    Does anyone know how to digitally remove the date and time stamp on the face of the photo once the photos are loaded in Aperture, short of doing re-touch? Working in Aperture 3.

    ebigglesworth,
    I too am curious about Frank's mention of the date and time removal tool.
    As an aside to your comment:
    I'd rather just be able to tell aperture I don't want the time stamp on the image, to remove it some how digitally, if that makes sense. You'd think it could just be backed out in some fashion.
    That's impossible. Your camera made it impossible. Your camera threw out some pixel data of the real picture in favor of replacing it with yellow, white, and black pixels (or whatever color your timestamp is). Basically, the original photo information is completely lost. All you can do is smudge things (in one way or another) and make the best of it. It will never look completely right unless you use a pixel editor (which Aperture is not) and painstakingly put color in, pixel-by-pixel.
    nathan

  • How do you date and time stamp pictures and videos using a EOS Rebel T3?

    I am needing to utilize date and time stamping on videos and photos in my work.  The pictures and videos must display time, a date, and reference number.  I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function. 

    While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist).  DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image.  Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
    The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).  
    SO... there are programs that will just do this.  You'll need to do a search (I found several but have never tried one so I can't vouch for them).  I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed.  They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
    Tim Campbell
    5D II, 5D III, 60Da

  • How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    BKBK,
    Thank you for your response. That does adequately cover the
    client-originated sessions, but still leaves the ability I am
    looking for unavailable.
    It did serve to definitively answer my most pressing
    question, however, with this statement:
    Note: ColdFusion cannot create a session if an initiator
    application uses a SendGatewayMessage method to start an
    interaction with a client, such as an SMS user. In this case, the
    sending code must keep track (for example, in a database) of the
    messages it sends and their destinations. When a response event
    arrives, it can look up the origniatorID to determine whether it
    was in response to an outgoing message.
    I will play around with the Application scope to see if there
    might be a workable solution there.
    RLS

  • How do I remove a date and time mark on a stored photo so I can put it into a calendar

    How do I remove a date and time mark on a stored photo so I can put it into a calendar.....?

    In Iphoto, yes.  You can use PhotoShop Elements or some other editor.  You can also crop.  (You might be able to make the retouch brush smaller.)

  • How can i get a copy of my ipone messages with the number, date and time stamp?

    How can I get a copy of my iphone messages with the number it was sent from and the date and time stamp?  Needed for court purposes.

    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    You should probably consult your attorney to see if either of these will be acceptable.

  • Can I date and time stamp photos on the photo?

    I would like the date and time viable on the photo.

    RobCob wrote:
    I'm honestly only concerned about my photos and music.
    You can Manually Backup your iPhoto Library and your iTunes Library to an External Drive without addition Software.
    How to correctly move your media:
    iTunes: How to move the library to an EHD
    Early iPhoto: How to move the Library to an EHD
    iPhoto '11: Move your iPhoto library to a new location
    iMovie: How to move the Library to an EHD
    It is important that the External Hard Drive is formatted as Mac OS Extended (journaled).

  • Date and time stamp transfer via Firewire

    Hi
    Having issues with a Sony micromv camcorder transferring digital recordings via fire wire to Apple macbook- the files are transferrred without the date and time stamp on it. Any way around the problem. Thanks

    ebigglesworth,
    I too am curious about Frank's mention of the date and time removal tool.
    As an aside to your comment:
    I'd rather just be able to tell aperture I don't want the time stamp on the image, to remove it some how digitally, if that makes sense. You'd think it could just be backed out in some fashion.
    That's impossible. Your camera made it impossible. Your camera threw out some pixel data of the real picture in favor of replacing it with yellow, white, and black pixels (or whatever color your timestamp is). Basically, the original photo information is completely lost. All you can do is smudge things (in one way or another) and make the best of it. It will never look completely right unless you use a pixel editor (which Aperture is not) and painstakingly put color in, pixel-by-pixel.
    nathan

  • How to get the most current file based on date and time stamp using SSIS?

    Hello,
    Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
    Thanks
    thx regards dinesh vv

    hi simon
    i excuted this script it is giving error..
       Microsoft SQL Server Integration Services Script Task
       Write scripts using Microsoft Visual C# 2008.
       The ScriptMain is the entry point class of the script.
    using System;
    using System.Data;
    using Microsoft.SqlServer.Dts.Runtime;
    using System.Windows.Forms;
    namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
        [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
        public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
            #region VSTA generated code
            enum ScriptResults
                Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
                Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
            #endregion
            The execution engine calls this method when the task executes.
            To access the object model, use the Dts property. Connections, variables, events,
            and logging features are available as members of the Dts property as shown in the following examples.
            To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
            To post a log entry, call Dts.Log("This is my log text", 999, null);
            To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
            To use the connections collection use something like the following:
            ConnectionManager cm = Dts.Connections.Add("OLEDB");
            cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
            Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
            To open Help, press F1.
            public void Main()
                string file = Dts.Variables["User::FolderName"].Value.ToString();
                string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
                System.IO.FileInfo finf;
                DateTime currentDate = new DateTime();
                string lastFile = string.Empty;
                foreach (string f in files)
                    finf = new System.IO.FileInfo(f);
                    if (finf.CreationTime >= currentDate)
                        currentDate = finf.CreationTime;
                        lastFile = f;
                Dts.Variables["User::LastFile"].Value = lastFile;
                Dts.TaskResult = (int)ScriptResults.Success;
    thx regards dinesh vv

  • DATE and TIME Stamps

    I'm a relative newbie still having issues with getting date and time stamps on my printed documents.
    I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
    I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp.
    Can anyone help me figure out my options in Mac for putting the following on a document:
    A. DATE and TIME printed
    B. NAME of document with LOCATION (I assume this is software specific?!)
    Thanks for any help with this.
    - Jon

    Yes, ...and I was hoping to find a solution since I sometimes have the same problem!
    But I'm afraid there is none. For sure I didn't find any fxscript function returning Date&Time. At the moment the best solution I know is what you suggested, Ian: capture twice, once in FCE for editing and once in iMovie for reading Date and Time.
    I'd be glad to write and share a plugin displaying date and time if somebody is able to tell me what fxscript function (if any) should I use...
    Piero

  • How do I find the date and time stamp on pictures?

    How do I find the date and time stamp for my pictures?

    The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
    There may be other photo apps that provide this information as well.
    PhotoForge2 will show the EXIF data as well as the GPS data if it is available.

Maybe you are looking for