Can you replace damaged frames with Adobe Premiere Pro CS6 ?

Hello everyone! I'm new to Premiere Pro CS6 and don't know all the tricks (no previous experience with video editing). I have a video file that has some damaged frames (it is a VHS-DVD bad quality transferred file). I'm wondering is there is a way to replace the damaged frames with adjacent good ones so the audio is not disrupted (instead of just deleting the damaged frames). Please advise and be gentle . I'm a beginner! Thanks!
Damaged image Good image next to damaged one

Thanks. I think I got it. I have two more questions. I'm trying to preview the video but it doesn't play in real time. The audio plays Ok but the video is lagging. I'm attaching my computer info so you can tell me if it is my computer's limitation.
Second question is regarding filters. In some parts of the video there's some horizontal lines scrolling down the screen. I wonder is there's a filter to minimize this issue before exporting. In the Export Setting I see only Gaussian Blur. I wanted to post a video sample but I don't see an option to post a video file that is not a link with a URL.
Message was edited by: Ellis home
I switched to a Dell Inspiron 570 computer with better Processor: AMD Athlon II X2 250 Processor 3.00 GHz and the video now plays in real time.

Similar Messages

Can you do wire-framing with Adobe Premiere Elements 8?

Can you do wire-framing with Adobe Premiere Elements 8? If so, how?
Thanks.

Well, I found out all about wire framing. I went to the public access station and saw their "state of the art" equipment and software. Wire framing is a very elaborate process of selecting the portion to blow up and repositioning it. I was told it was a very special feature of this particular software (Final Cut). Guess what? I was able to do the very same thing by clicking on the video clip in the workspace window, grab the corner and resize it and center it the way I wanted. Took less than half the time, with fewer steps. I looked at my result and the result from the "special feature" and I couldn't see any difference.
However, you were correct when you cautioned about zooming in and losing quality. When I zoomed in too much, it became blurred. The whole reason for all of this was because of a window that should have been covered prior to the performance. There is a lot of annoying light from the window and the director wanted to cut it out. Unfortunately, by cutting out the window, some of the dancers were cut out as well. I haven't shown her the finished product yet, but I left some of the window in some of the clips in order to keep all the dancers.
Again, thank you for all your help.
L

Editing Faster You Way with Adobe Premiere Pro CS6 | Adobe at NAB 2012 | Adobe TV

Join Karl Soule, Business Development Manager at Adobe, as he unveils and demos the exciting new features in Adobe Premiere Pro CS6. See how Adobe Premiere Pro CS6 combines incredible performance with a sleek revamped UI, and a host of powerful new creative features, including Warp Stabilizer for stabilizing footage, dynamic timeline trimming, expanded multicam editing, adjustment layers, and more for a fluid workflow.
http://adobe.ly/HImtcE

Sleek revamped UI?
Until the UIs across all CS products are consistent, the UI as a whole is a complete failure.
It is astounding how after all these years, the CS products STILL have different UIs and UXs. Even the way the user accesses basic functions for layers (rename, duplicate, etc.) are not consistent from one app to the next.
So please hold the comments about the UI, other than "We realize we have completely failed, and our different product groups do not care at all about a unified experience across the suite, and each just want to do their own thing. And nobody in Adobe was willing to beat our groups up to force them to have some consistency. That is priority #1 for our next release."

Can't import .mov files into adobe premiere pro cs6. Help please!

Help please. When i try to import .mov files i get a message saying, "The importer reported a generic error." This video was taken from a nikon D7000 camera. If you have any questions i can answer them very quickly!

Hi WatsYourPowerLvl,
Thanks for posting on Adobe forums.
Do you have QuickTime Player installed on the machine ?
if not please install from :
for MAC : http://support.apple.com/kb/dl923
for Win : https://www.apple.com/in/quicktime/download/
if yes please tell us following information :
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Are you using security software e.g. Norton, etc
and
if windows, Please check if you have windows defender turned on ?
Regards,
Sandeep

Help! I accidentally closed some screens on Adobe Premiere Pro CS6

So I was messing around with Adobe premiere pro cs6 on my laptop (using touchpad, no mouse), and I went to click File + save, but instead I clicked File + close, and it closed some of the windows on my screen (the upper left one and the bottom left one). Now I can't even view my project. Is there any way to fix this?

Good morning'
I downloaded and installed Production premiere CS5 and installed on Surface pro 3 since i missed placed my cd's.
It's works,but when i try to go to help and update for 5.0.3 its fail to update. I got email from adobe to help and i poosted my cell No.
so far nobody called me. Thats kind service you geting from ADOBE.
832-368-7712
PLease let me know their phone number for tech support.
Have a good day.
Thanks,

Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)

I have a problem with Adobe premiere Pro CS6 on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I don't know what should I do. How to fix it ?

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

'Adobe Premiere Pro CS6 couldn't find any capable video to play modules' What should i do?

Hi
I've been having some troubleshooting with adobe premiere pro cs6.
I've tried everything from reinstalling it, to changing the bios properties, and i don't know what else should i do.
I have a Dell Vostro with an intel core i7 and a amd radeon 7600M graphics card.
What Should i do?

Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Switching from Adobe Premiere Pro CS6 to Adobe Premiere Pro CC

I am currently renting Adobe Premiere Pro CS6 through the creative cloud. What all would I have to do to switch to Adobe Premiere Pro CC. Is there anyway to just switch from my current subscription with Adobe Premiere Pro CS6 to Adobe Premiere Pro CC. Or would I have to buy a whole new subscription to upgrade to Adobe Premiere Pro CC?

the acrobat dc installer will uninstall your acrobat pro xi. you'll see a warning when you start the installation.
i don't know if there's a migration issue but dc seemed to pickup my acrobat x signature and my recently opened pdfs. here's more info, https://helpx.adobe.com/acrobat/faq.html
i just watched a couple of videos about it and it looks very impressive.

How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?

How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?
Explanations with pics will be better.
Thanks.

Not sure what you are asking. A download is a download. what you do with the file afterwards is entirely up to you. If you mean to install Mac software on Win, then no, this can't be done. Furthermore you also would have to have a proper Win serial.
Order an Adobe product platform swap or language swap
Mylenium

XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

Hi folks,
I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
The reason the producer suggested to deinterlace right away when using an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
3. What would be the best solution to tackle this issue (jagged lines) during editing?
As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and system specs as stated below:
Since Adobe Premiere Pro CC has native support for XDCAM HD is there any advantage of using an intermediate like ProRes at all?
How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
Thanks for your help!
working with
Adobe Premiere Pro CC and Adobe Media Encoder CC
Apple MacBook Pro
Intel Core i7 Quad Core Prozessor
2.3 GHz and 6MB L3 Cache
16 GB RAM 1600MHz DDR3,
256 GB SSD
Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

I couldn´t see imported videos with Adobe Premiere pro

Hello:
My name is Oren. I´m from Spain, and this is my problem.
One month ago I bought a Toshiba Satellite 850-31M. It has an x64 processor, 16 GB of RAM and I have 2 hard drives, the c: an SSD of 500 GB and other of 1 Tb hardisk, configured as D:. It has a GeForce GT 630M graphics card with 2 GB of RAM. W8 operating system.
I wanted to try the Adobe Premiere Pro CS6 and I downloaded the trial version. No problem, until I tried to import a video in the source window. Appears a small window that says "importing" and give to play in the source window and start .Audio be heard, but not the image. I've tried different video formats and always the same. The same video are seamlessly Quick Time and other video viewers ..... I do not know what to do, I think I've tried everything, even restart the computer to its factory settings and install Adobe Premiere vacuum and the problem remains. I tested with a trial of Premiere CS5.5 and got it. You hear the audio but no video . Insert the video in the timeline and recognizes it as such, even the first frame, but said, is not seeing in the "source", nor in the preview, only the audio.
What could it be? Am I you could lend a hand I'm desperate?
thank you very much

Hello:
I have the vídeos in a hard-disk. I'd tried in different video formats and
always the same. I hear the audio but I couldn't see the video image.
El jueves, 25 de abril de 2013, Jim Simon escribió:
Re: I couldn´t see imported videos with Adobe Premiere pro created by Jim
Simon <http://forums.adobe.com/people/JSS1138> in Premiere Pro - View
the full discussion <http://forums.adobe.com/message/5265806#5265806

Photoshop didn't install with adobe premiere pro

I recently installed adobe premiere pro CS6. I don't see Photoshop or After Effects as an application. Note: I previously had Adobe Elements 12. Do I need to uninstall that in order for Photoshop CS6 to install? I am definitely a newbie so please be gentle...

with your two licenses you can install and activate both. if you need installation files:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How I can import Avi (Imm5 format) to Adobe Premiere pro CC?? I am using Windows 7 thanks

How I can import Avi (Imm5 format) to Adobe Premiere pro CC?? I am using Windows 7 thanks

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Help with Adobe Premiere Pro and AME CS6

Hi all,
First off, i would like to state that i'm pretty inexperienced in video editing, so please keep that in mind when answering or questioning something.I will try to explain my question to the best of my abilities, but please answer in a 'simple' manner, and don't shoot me when i miss something obvious.
I came across a 'performance?'-issue (slow exporting) for which i don't really know how to find the solution. I've been struggling with it for a while.
Your (any) help or insight is greatly appreciated!
My system:
Windows 7 Professional - 64 bit (Service Pack 1)
RAM 20 GB
Intel Core I73770 (dual quad core)
Direct x 11.0
Nvidia NVS 310
Adobe premiere pro CS6 (upgrading to adobe CC is unfortunately not an option)
Adobe media encoder CS6
They asked me to edit some video's on a regular basis, nothing complicated, just a 'training'-video. Length of video is about 2 hours edited.
File info:
Source file is 1920x1080 (1,0), 25fps, Upper, 2:11:10:24, 48000Hz, Stereo
There is one audio channel (left is standard mic, right is a shotgun mic) which is split to two audio channels, edited in aodbe audition (basic noise reduction)
I've been running into export times of over 12 hours (exported to mp4), which i'm guessing is a bit much.. . The slowness is also occuring with other export settings.
I came across a possible solution (in short: changing the Video Rendering and Playback in the project settings of APP) but that field is inactive for me...? what's up?
"Use Preview Files" works in CS5.5 but is "Useless" in CS6
I don't really know what to do from here, to figure out the solution. Any suggestions on fixing or troubleshooting the extremely long export times??
Thx in advance.

Dual video problems - Do you have dual graphics adapters?
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0

Export multichannel mp4/h.264 with Adobe Premiere Pro CC

Dear community,
we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
However, we are not succentful in exporting a multichannel mp4/H.264 clip.
We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
What are we doing wrong?
Thanks for every suggestion.
Thanks in advance
André

Thanks for your thoughts, Richard.
Your are right, we currentky use the Adobe Premiere Creative Cloud version.
We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
André

Can you replace damaged frames with Adobe Premiere Pro CS6 ?

Similar Messages

Maybe you are looking for