Can you reset macbook pro late 2011 to factory settings

am trying to get back to square one to use setup assistant to transfer files from old macbook to new macbook pro late 2011 model,

Hardware wise two resets can be done:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
If you want to wipe the hard drive contents and restore to a brand new Lion installation with nothing else,
follow these directions: http://support.apple.com/kb/HT4848

Similar Messages

Factory reset MacBook Pro late 2011

Hi, long story short i want to reset my Mac, it has been freezig a lot lately, i can't be bothered taking it in to Apple waiting etc, i'd rather just do it myself, ive backed up everything i want/need to.
What im asking is how do i do it, and how do i install Mountion Lion after?

Press Command and R keys on boot, open Disk Utility, erase the disk and reinstall OS X

I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

Macbook pro late 2011, completely messed up, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space.

Can't find the Airplay icon! I have a Macbook Pro Late 2011

I have a MacBook Pro Late 2011. Yes I am sure that it is Late 2011 because I looked up the serial number and the website says it is indeed MacBook Pro Late 2011. I just bought an Apple TV and I want to use Airplay but I CANNOT find the Airplay icon on the upper right menu bar. I updated my software and everything but I still dont see it! What do I need to do inorder for me to use Airplay? PLEASE HELP!!!!!!!!

What Mac do you have? It needs to be at least 2011
OSX needs to be at least 10.8
Has nothing to do with Internet, you need to check your local network and also make sure both ATV and Mac are on the same network. Airplay should also be enabled on ATV

Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM

Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM...when I turn on after 2minutes it freezes and do not repond and system prefrences also not working...plz help me....I don,t have mac os disc
I have tried safe mode boot, NVRAM and PRAM reset but no luck...

First, try a Safe Mode boot.
Startup your Mac in Safe Mode
A Safe Mode boot takes a longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from your Apple () menu.
If that didn't help, reintall OS X..
Restart your Mac while holding down the Command + R keys so you can access the built-in utilities in OS X Recovery
message edited by: cs

15" Macbook Pro late 2011 is running hot.

My 15.4" Macbook Pro late 2011 (box instalation) is running hot at 200F and the fan jumps to 6000rpm without any real reason.
I know it is not normal, what can I do? Clean install or service?

Thanks guys,
Hardware testing passed.
Did a SMC reset and it seems at least for now that the RPM jump happens more smoothly and not to 6000rpm.
I will try this weekend to stress it a little and see how it behaves. (I will also upgrade the memory to 8GB)
In the end I think I will do a clean install and see I there will be any more improvements.
I'll keep you posted.

MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion freezes on wake up

Hi,
My MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion (up to date) 1 week old freezes on wake up.
Plugged on power or not, same issues.
No apps running.
When it goes to sleep itself i wake it up it freezes for few seconds
When i put it to sleep mode same issue.
With the lid same issue...
I already try setting up the sleep mode from 3 to 0 with terminal command it didn't work.
Can it be an hardware issue ?
Any ideas ?

Dear TheSmokeMonster, Dear all MacBook pro 13'' late 2011 users,
Here is the update.
As TheSmokeMonster mentionned (above) they asked me to reinstall MAC OSX Lion by shutting down the computer and holding cmd + R while switching it off. Then you choose the language and you are good to go for a looooonngg 4GB download (it took me 8hours yeah chinese ADSL :-/ )
Lion reinstalled itself automatically and restarted. - it did not solve the issue.
I called Apple Care again and we try to run the hardware diagnostic by restarting the computer and holding D. FYI do not try it as this command does not work on the new version of macbook pro.
Here is the intersting part! As the Apple Care already did everything they could to help me. We booked an appointment the my local Apple Store in Shanghai (a real one )
The Genius remake again the SMC and PRAM reset - same issues and he also tried to boot Lion from his own external hard drive - Same issues. So we started to think that it was a Hardware problem.
We tried another MBP 13'' late 2011 (last hardware update) in the shop to see if it works properly and it DOESN'T!
Yeah you heard me. I have been trying more than 10 MBP 13'' (2.4Ghz 4GB and 2.8Ghz 4GB) put them asleep and they all freeze on wake up!! it also does it on Mac book air 13'' it seems to be a global issue on all the new 13'' machines. A compatibility problem between Lion and the new hardware architecture of the 13'' ? just my guess.
Anyway FYI this issue doesn't occur on MBP 15 and 17"
I was just amazed by this global problem so was the genuis. We could not find any solutions cause even a replacement one will have the same problem. They told me i could change for a 15" but i had to go back to the Apple shop where i bought it which is 2000Kms away not really convenient So i file the cas and i took my MBP 13'' back with me.
They will contact me later for further explanation.
To be continued.

Macbook Pro Late 2011 Grey screen

Hi pals,
I have a Macbook Pro Late 2011 since 2012. I've upgraded it to Yosemite, thing that I've to do from scratch because it worked very slow, but that's not the deal here.
The other day I started it, and it simply didn't do it. I've tried everything, like Unique user mode, safe mode, starting from dvd, reseting PMU-PRAM-NVRAM, changing hard disk, changing RAM,... everything I've found in the internet.
Only one thing worked once, and I say once, because it only worked once... I switch the HD and I used an USB to install Yosemite from scratch. It worked but when I reseted it, it never came alive again... That time, I used Disk Utility on Yosemite to format the original hard disk (700GB 7200rpm), and I recovered my personal data.
Now, when I try to start it from USB to install or from HD it never works. It shows the progress bar till 1/3 and then the screen becomes grey, the CPU heats and the fans start to spin like crazy. Sometimes it turns off, sometimes it doesn't and I have to do it.
Any help will be welcome, thank you .

The colored lines seem like it's a hardware graphics problem, likely brought on by the EFI firmware update that's been going around lately that exposed problems your hardware had you didn't know about.
Your going to have to bring this problem to Apple, I hope you have AppleCare because it's looking like a replacement logicboard and they are not cheap.
You can try exhausting the remedies in my User Tip, but those mostly deal with issues from the gray screen onwards, the colored lines represent a firmware issue and Apple doesn't release the newest versions online for self reinstall until they have proven themselves.
If your worried about sensitive data, you can order a tool kit from OtherWorld Computing, open the machine and remove the hard drive and use a SATA to USB connector to another Mac to remove data and scrub free space in Disk Utility.

Graphic problem in 13'' macbook pro late 2011

I have problem with my 13'' i7 macbook pro (late 2011) . for instance when i swipe up/down with 4 fingers, my apps or docs minimize So logy and slowly as well as when i want full screen my browser or other application, it do it very bad with some vibration and i dont know what do i have to do?
is this problem for my graphic card or is for Lion ios?
as the matter of fact , i bough this mac 2 months ago.
Im wondering if someone can help me in this regard!

Since it is less than a year old call AppleCare: 800-SOS-APPL (in the US).
Have your Mac's serial number ready: http://support.apple.com/kb/HT1349
After you wait on hold for a very long time they ask you some frustratingly basic questions like is it charged and did you spill water on it etc., they will talk you through some basic troubleshooting such as an SMC reset. In the end they will offer to schedule an appointment at a Genius Bar where they will fix whatever is wrong. It won't cost you anything (unless you spilled water on it etc).
You can do all this yourself:
SMC reset:
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Genius Bar Reservations:
http://www.apple.com/retail/geniusbar/
You can test the hardware yourself also, if it reports something wrong tell them what it is.
Using Apple Hardware Test:
http://support.apple.com/kb/HT1509

MacBook Pro Late 2011 Restore and EFI partition gone.

Hello!
Sorry if my problem seems easy to you but im stuck in a difficult situation. Im quite new to Mac, but after i tried to delete the BootCamp partition on my MacBook i deleted the Recovery HD and the EFI partition by accident. Now my question: is there ANY way to get a new copy of the Recovery HD so i dont have to use Internet Recovery each time? And is there a way to get the EFI partition back so i can update my EFI Firmware again? Mac OS X isn't damaged and is at the same place on the disk as before. 200 MB of free space before Macintosh HD and ~4 GB after it. I have a MacBook Pro Late 2011, 13", 4 GB RAM, a 500 GB Hard drive and i have the EFI Firmware version 2.3 on it so i can still restore using Lion Intenet Recovery.
Thank you for your answers!

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
Vendor Name:    Apple, Inc.
Device Name:    MacBook Pro
UID:    0x0001000A17016E60
Firmware Version:    22,1
Port:
Status:    No devices connected
Link Status:    7
Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

Osx 10.8.4 does not run macbook pro late 2011

does any have issues after installing osx 10.8.4??? because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is to reinstall the osx 10.8.3. can anybody help me with this issue?? thank you.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My japanese macbook pro (late 2011) physical keyboard does not match with the on screen japanese keyboard in windows 8.1 so does caps lock

I am using windows 8.1 pro on my Japanese macbook pro (Late 2011) and enabled japanese language but the problem is that when i press caps lock (lower left corner) it changes the input method from english to japanese. I checked my on screen keyboard (OSK) in windows and its different from my physical keyboard i.e. keys are different on my physical keyboard compared to OSK. Can anyone help me?
Thanks
Tenadona

Can I suggest the following articles, which are worth reviewing?
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
Boot Camp: Apple Wireless Keyboard keyboard mapping in Windows - Apple Support
Boot Camp: Windows commands on an Apple keyboard
Windows does require language packs to be installed, if you want the physical keyboard to match the on-screen keyboard.

Can you reset macbook pro late 2011 to factory settings

Similar Messages

Maybe you are looking for