Can you reset the hardware assignments in Logic Pro?

Somehow I have messed up the hardware assignments for the B3 plugin. Is there any way to initialize the hardware assignments? Thanks!

@ Eriksimon:
Thanks for your help.
Now, I understand that it's a little different. Basically, you can change the values (ranging form 1 to 360) for the 24 upper fields of the Color Palette. (Logic derives the bottom two rows from the top one, making it darker). These values refer to the Hue-color circle. So, you can't change the saturation or lightness ... that's what I was looking for.
Anyhow, I did change some of the values. In this case it starts with 360 ("real" red) for the first region (01), followed by 15 for the second, 30 for the third etc., stretching over the whole spectrum. (The original values range from 14 to 312 only.)
Thanks again for your hints.

Similar Messages

  • Can you change the color pallet in Logic Pro X?

    Hi there,
    Is it possible to change the colors on the color pallet in Logic Pro X?
    They are too dark for me.
    I would appreciate your replies.
    Thanks and cheers,
    GJ

    @ Eriksimon:
    Thanks for your help.
    Now, I understand that it's a little different. Basically, you can change the values (ranging form 1 to 360) for the 24 upper fields of the Color Palette. (Logic derives the bottom two rows from the top one, making it darker). These values refer to the Hue-color circle. So, you can't change the saturation or lightness ... that's what I was looking for.
    Anyhow, I did change some of the values. In this case it starts with 360 ("real" red) for the first region (01), followed by 15 for the second, 30 for the third etc., stretching over the whole spectrum. (The original values range from 14 to 312 only.)
    Thanks again for your hints.

  • Can you download the extra data of Logic Pro X on a separate hard drive?

    I want to ask if you could download the extra content on a separate hard drive?, I have a SSD so there isn't enough space, a

    Welcome to Apple Support Communities
    If you have another Mac, open the App Store, log in with your Apple ID, go to Purchases and download Logic Pro X. Then, copy it to an external drive (it's saved in /Applications). Finally, copy Logic from the external drive to the Applications folder of your Mac desktop

  • Where can I find the serial number for LOGIC PRO from the AppStore

    Please help me:
    Where can I find the serial number for LOGIC PRO from the AppStore?
    I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

    My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

  • Where can i find the sample instruments in logic pro x.the proper plugins

    Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.

    My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

  • Can you boost the volume in DT 990 PRO 250 OHM headphones?

    can you boost the volume in DT 990 PRO 250 OHM headphones?

    You need a headhone amplifier, an MBP won't drive those very well.

  • Can you plug the kona3 into a macbook pro?

    can you plug the kona3 into a macbook pro?

    Recommended KONA 3 System:
    Apple Mac Pro with Dual-Core Intel Xeon Processors (2 GHz or better) with a minimum of 2Gb RAM for uncompressed SD or 4Gb for uncompressed HD. Use a Fibre Channel or SCSI external RAID for uncompressed SD/HD storage.
    Minimum KONA 3 System:
    Power Mac G5 (dual) PCI-Express, 2GHz with 2Gb minimum for uncompressed SD or 4Gb for uncompressed HD. Ensure your Macintosh has a PCI-Express slot for compatibility. Use a Fibre Channel or SCSI external RAID for uncompressed SD/HD storage.
    Recommended KONA 3X System: Apple Xserve 3 GHz Quad Xeon or Power Mac G5 (dual) 2.5 GHz or better with minimum of 2Gb RAM for uncompressed SD or 4Gb for uncompressed HD.
    PCI-X slot required (later G5s have these slots)
    Minimum KONA 3X System:
    Apple Power Mac G5 (dual) 2GHz with a minimum of 2Gb RAM for uncompressed SD or 4Gb for uncompressed HD. PCI-X slot required (later G5s have these slots)

  • Can you use the newest version of quicktime pro 7 with a mac osx 10.4

    can you use the newest version of quicktime pro 7 with a mac osx 10.4?

    No. The newest you can is version 7.6.4.
    (58439)

  • How do you get the piano roll on logic pro x to show 1/64th notes?

    On the piano roll in Logic Pro X the grid only shows like 1/16 notes. I want to be able to zoom in and have the grid at 1/64 notes.

    Transport is at the top center of the Logic window. If you click on the "/16" which I circled in red, you will get a drop down menu to change the the note length you want.
    Your transport may look different and might not have the "/16" right now. I have a custom transport displayed. "Custom" can be selected by clicking the "gear" icon on the left of the transport. Various options for what to display in the transport can be accessed by right-clicking in the transport bar and selecting "customize transport and display." The option you are looking for will be in the "LCD" section - choose "custom" and check the box for "signature division."

  • How can you recharge the battery on a MacBook pro 2011 with usb cable?

    How can you recharge the battery on Macbook Pro 2011 with a usbcable?

    No, unfortunately.
    You have to use the proper power adopter.
    Best.

  • How can you reset the video adapter on a MacBook?

    My MacBook will only display in monochrome.  Went into Preferences and reset resolution and color profile. And no change.  Reset PRAM and still no change.  Can anyone recommend a solution for resetting the video?   This occurred after hooking up an external HD display and streaming video to an HDTV
    Thanks in advance and Happy New Year!

    The SMC reset does something different than
    a NVRAM-PRAM reset, have you tried it?
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    PS: was the Universal access system preference panel setting checked
    to see if it was the cause of Grey-scale contrast change in the display?
    http://etc.usf.edu/techease/4all/vision/how-do-i-change-the-display-contrast-in- mac-os-x/
    There may be something else going on.
    Good luck & happy computing!
    {edited}

  • How can I upgrade the solo version of Logic Pro 9 to Logic Studio?

    I just would like to know how and where to upgrade logic pro to logic studio

    First of all, Erik is correct.. Logic Studio has been discontinued.. However, there are a few copies left around I am sure... to purchase if you really wanted to...
    But.....
    Unless you really want Waveburner and Soundtrack Pro 3..(Neither of which have been updated for at least a couple of years now..)  there is little point in buying Logic Studio 2... as it will cost you $499... and you can buy Compressor and Mainstage (the other two parts of Logic Studio) for much less than that on the App Store.... and the additional content (that actually took up most of the DVDs in the boxed set) can be downloaded for free within Logic Pro itself.
    I think a newer version is soon to be announce.
    Not of Logic Studio there won't be.. I believe boxed sets of Logic are long dead and gone... and won't be seen again... It's all App Store products from now on...
    There may well be a newer version of Logic Pro on the way.. but no one knows when.... until Apple announce it.

  • How can i download the latest update of Logic Pro X for my non-internet computer?

    This might seem like a daft question but i usually download updates onto a usb stick so i don't have to drag my desktop computer up the stairs only to instal an update...
    Can anyone direct me into the right direction as i am already going crosseyed?
    Thank you.

    Welcome to Apple Support Communities
    If you have another Mac, open the App Store, log in with your Apple ID, go to Purchases and download Logic Pro X. Then, copy it to an external drive (it's saved in /Applications). Finally, copy Logic from the external drive to the Applications folder of your Mac desktop

  • Can you record outboard effects live in Logic Pro?

    I'm new at this and was wondering if it's possible to record a signal into Logic through my FireFace800 and route it through a send back out to an outboard reverb and then record the effected signal along with the dry signal simultaneously?
    Sometimes I record long pieces of electronic music and I would like to be recording and say half way through the recording route the signal to my outboard effects and have that record back into Logic on another track. Is this possible or do I have to use the I/O plugin after the fact. If so, how are most of you using the I/O plugin? on a new track or on a bus? Just trying to get my head around this. Any advice is much appreciated. Cheers.
    G5 dual 2.7   Mac OS X (10.4.8)   FireFace800

    You can do this. Make sure software monitoring is enabled, and you'll have to compensate for latency.
    Alternatively, you can do the routing inside your audio interface using it's own mixer panel - just send your inputs to Logic and also outputs from the interface that feed your outboard effects, bring them back into another pair of inputs, and record from both at once. You'll get better latency results by doing it this way directly with your interface, and as long as you can set this up, it would be the preferred method rather than doing the routing througuh Logic.
    If my little M-Audio Crapinterface(tm) can do this, I'm sure your spiffy Fireface can...

  • How do you change the key of a Logic Pro X loop?

    Hi everyone,
    I am working on a song in Logic Pro X using one of the loops and I just wanted to know how to change the key of the loop to fit in with the key of the song? The key of my song is C Major while the Loop is in G Major.
    Any tips would be gratefully received.
    Many thanks.

    Jamiesroom wrote:
    How do you change the key of one specific loop using the Key/Transpose in the Inspector? Step by step instructions would be great.
    Many thanks.
    Here is the step-by-step instruction:
    Step 1: Select the MIDI Region and set the Transpose value in the Region Inspector to the left.
    Step 2: There is no Step 2
    If you are a newbie, then I would recommend to have a look at my Graphically Enhanced Manual "Logic Pro X - How it Works" where I explain everything in great details with lots of easy to understand diagrams and screenshots, including a separate chapter about Apple Loops.
    BTW: If you have a proper Apple Loop, then it should automatically adopt to the key of your Project. A transpose is not necessary, unless you want to overwrite a phrase to a specific key.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Maybe you are looking for

  • Strange behaviour of iPad Photos app/My Photo Stream with iOS 8.1 and Yosemite

    My requirement is surely simple and commonplace, yet is proving impossible to achieve thanks to Apple's weird design of the Photos app and the way My Photo Stream works.  I'm very technically savvy, but I'm quite prepared to admit I'm being stupid if

  • Disabled iPod not recognized by iTunes, completely locked.

    Hello, Recently, a friend of mine who had my iPod touch at the time was playing around with it, just basically messing with random settings. He set a passcode made up of random numbers in the process, neither of us know the combination. We made a few

  • I need to copy files from a new ipod to my itunes

    Hi: i have a apple from my sister with 6,000 song, in my itunes i only have 900, ¿can i copy this 6,000 songs to my itunes sofware? Ludy

  • Web Service Destination Problem

    Hi, I want to try out this simple example of using a Web service in Visual Composer (http://help.sap.com/saphelp_nwce711/helpdata/en/0d/a467e29b3f4b0db27cec840066e5b1/frameset.htm). After I have created a destination in the NetWeaver Administrator, I

  • How to map fields to LDAP

    Hi All, I am very new to OIM,i have added some fields to self-registration form in OIM Admin console, now i want to map those fields to LDAP to populate the values to the server. Can anybody help me on this pls. Thanks, Kishore.