Can you run CRXIR1 and CRXIR2 on the same machine?

I have CR XI R1 Developer edition installed on a workstation which I use to maintain imbedded reports in a large system written in VC++ V6, as well as several newer applications written in VB2003. The IT department issued me a new machine on which is installed VB2005. Now I receive errors in my VB applications when using the ExportToDisk function.
I understand that I need to upgrade to CR XI R2 to be compatible with VB2005. How will that affect my older code written in VC++ V6?

Well, you don't really need CR XI r2 to be compatible with .NET 2005 as .NET 2005 ships with CR 10.2. Now, if you want to be at CR XI with the COM apps (VB and C++) as well as .NET 2005, then you do need CR XI r2. (CR XI does not have assemblies for the 2.0 framework)
Personally, I would not recommend CR XI r1 and CR XI r2 on the same computer. Theoretically this should be OK, but from experience, I find that occasionally CR XI r1 and CR XI r2 just don't like to play together...
I'm not sure where you want to go with this now; resolve the export error, then move on, or?
Ludek

Similar Messages

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Can you have pages and word on the same computer

can you have pages and word on the same computer

Sure, I do (my Office is 2008 but I keep it around for some things I get from work).

Is it possible to run VLM and lmtools on the same machine

hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

Hi SvenNittmann,
in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
Volume License Manager on a Virtual Machine - National Instruments
http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
I also use VLM in a virtual machine and I could recommend you the same solution.
Regards, Stephan

Can I run Tiger and Leopard on the same computer

Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del

# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger.

Can you share to other users on the same machine?

If I have 2 users on the same machine, and I log in with one user, open iTunes, then swich user and bring up iTunes. Will the second user see the shared shongs from the first user?
Thanks,
Alfredo

Here is what I did:
1. Create new user account.
2. Open iTunes
3. Set preferences to NOT copy files over on an import.
4. Set the location for my music library to the "Public" folder (created an iTunes folder in there and pointed to it).
5. Selected "Add to Library" and selected the top level folder where my songs are (an mp3 folder on my firewire drive)
6. Since my son had some songs of his own that he exported from Garageband, I went back the the preferences and checked the "copy files on import", then selected "Add to Library" on those files. NOTE: if you do this, you may want to exclude that directory in step 5 above.
The reason I used Public/iTunes as the output folder, was so other account could import those files to their iTunes in the future.
Alfredo

Can you fade in and fade out the same layer in the same page state?

I am simulating a lot of touch interactions, and have a hand object that moves over the simllated screen. I want to add small "taps" under the hands to show touch; I can see how its easy to fade IN an object (say a small circle) that represents the touch; but how do I fade OUT that same object?
Any help appreciated!
Rob

Hey Rob,
I think you can achieve the effect you're looking for by using 'on click' interactions in conjunction with action sequences.
I just made a simple example, here are the steps:
1) Select the component you'd like to react on 'tap'
2) In the Interactions panel, click 'Add Interaction', and select 'play action sequence'
3) The timelines panel should now be given focus, and display the new 'on click' action sequence
4) Select the "circle" you'd like to make the fade in followed by fade out effect. If their opacity is set to 0 at this point, use the layers panel to select them.
5) With the circle selected, in the timelines panel click 'add action', located at the bottom.
6) Select 'fade' from the options available.
7) In the properties panel, define the fade properties (for fade in, obviously set 'from' to be 0, and 'to' to be 100)
8) Repeat steps 5 through 7, but choose from=100 and to=0
9) Arrange the fade in, and fade out events on the timeline to get the timing choreography right.
10) If you haven't done so already, set the opacity of your circles to be 0.
Does this work for you?
Is this what you were looking for?
Let me know if you need clarification on any of the steps.
Thanks for posting, great question!
Tara

Can you have IDM and GRC on the same stack?

HI, I am new to IDM and am a Netweaver Basis professional with some performance experience around GRC. Is it wise to place the two together on the same stack?
The customer will have 190,000 employees and lord knows what the roles will look like at this stage but I'm just a bit worried as I have seen the GRC jobs run for an awfully long time with a lot less users/roles and chew things up a bit
the right advice appreciated.

Now thats interesting.
My architect told me that we were using the 7.1 version but in affect it runs on a 7.0 J2EE.... perhaps he is having me on. If you know for sure then let me know.... regardless I'll have a dig in the documentation.
Naturally having Project and dev share with GRC should not be considered an issue but having production, pre-production and validation instances running combined with GRC is my concern as I have seen the GRC really slow up the system. The argument they are saying is the heavy jobs will run overnight and mostly just collection and configuration of GRC during the day. They are intending to run in production with 2 instances of 3 servers.

Can you use VGA and DisplayPort at the same time.

I have a T500 with the ATI graphics. I currently have it set up with only a VGA monitor. I am wanting to also get the DisplayPort to VGA adapter. Will I still be able to use both external monitors and my laptop monitor? If anyone has done this let me know. I have read that you can use VGA and DVI but neither of my monitors have DVI.

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Can you use footnotes AND endnotes in the same document?

I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09? I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)... I would appreciate any suggestions! Thanks!

The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
That would be the only workaround I can think of.
Peter

Can you mix DV and HDV in the same sequence?

Hi Everyone....
I am new to the forum, and new to FCP...yes! I joined the dark side and just got a MAC.
I am trying to learn this system, and the 500 manuals it came with are about as clear as mud.....
Can I mix 16x9 DV footage with 16x9 HDV footage? And please don't tell me I am hosed!
I have some footage right now in a sequence, but it has the red line above the sequence, indicating that it needs to render.
And actually I can't even get the high def footage alone in a sequence to work...but that is another post.
Thanks in advance...
Aubry
Mac Pro Quad Xion Mac OS X (10.4.7) 2.66 GHz | 4GB ram | NVIDIA GeForce 7300 GT | 1 250G &1 500G Internal Drives

I think what your asking is this....the captured clip is:
frame size: 1440x10180
compressor: hdv 1080i60
data rate 3.2 mb
pixel aspect: hd 1440/1080
I changed the sequence settings to match this and it came out all kinds of funky.
Is there another way to find out what kind of high def the clip is? I have the Sony FX1 if that matters....

Why can't I run Safari and Skype at the same time without making my computer freeze up?

I can't believe I can't run Safari and Skype at the same time without my computer freezing up, it's a MacBook Pro with Mac OS 10.6.8 and it has an Intel Core 2 Duo CPU with 2.2 Ghz and 2 Gb of RAM. Is this a hardware problem or a software problem?

I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

Can i run 9ias versions 1 and 2 on the same machine

i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

Can you run CRXIR1 and CRXIR2 on the same machine?

Similar Messages

Maybe you are looking for