Can you run Orchestrator on the same SQL server as SCCM?

500+ systems, and our SCCM data base is sizable. We're running SQL on a virtual server within our SAN. I can tell you just poking around on the server, I do feel its kinda slow and everything feels to kinda chug.... Might be better to just see if I can get approval on the spend for another license... I do know deep down thats the correct way to go. 
Unless Orch is so light and hardly uses any resources that it can piggyback SCCM? The hard part is going to be to convince them to use something I am still learning to use. Ha! But I do have a book for it, so thats a step in the right direction. 

So our current solution is MDT for deployments, and SCCM for software and updates deployment as well as software center self service.
I'm wanting to bring in Orchestrator to start using playbooks to automate everything. I see that all of Software Center's add-on parts don't cost anything, but all require SQL Server. Well I already have that running for SCCM. So can I share between the two? SCCM is already kind of a big hog, but I have zero to little knowledge of Orchestrator... Would that be just a little more stress on the server or a lot more? Does Orchestrator really need its own server?
This topic first appeared in the Spiceworks Community

Similar Messages

  • Installed hotfix for error 3241 when you run RESTORE FILELISTONLY statement in SQL Server 2008 R2. But still get same errormessage.

    I ran into erro 3241 when you run RESTORE FILELISTONLY statement in SQL Server 2008 R2.
    Found the hotfix 
    Cumulative Update 13 for SQL Server 2008 R2 SP1.
    I have installed this hotfix, now running 10.50.2876.0
    But I still get the same error when trying to restore a backup.
    What else do I need to do?

    second to what bodo said Instead of installing SQL server 2012 SP1 CU13 it would be better to install
    SQL Server 2008 r2 Sp2 SP's are more throughly tested and would include all fixes for CU and Sp1
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

    Dear all
    How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
    Thanks
    Regards
    karan

    Hello
    These are the following errors
    1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
    2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
    3.
    <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />  
    <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
    Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
    tThere are repeating errors also.
    TThanks
    Regards
    kkaran

  • Restore BizTalk Servers on the same SQL Server

    Hi
    If I need to do a recovery of the BizTalk databases to a point in time before a hardware failure on the same SQL Server, how do I achive this?I have seen the only recommended method is to use log shipping, but is this to restore Databases onto another SQL
    Server? If I just want to restore all Databases onto the same server, how would I achive this.
    Thanks in advance

    The only supported Backup/Restore scenario for BizTalk Server, is using the SQL Agent job: 
    Backup BizTalk Server (BizTalkMgmtDb)
    If you had this job running before the hardware failure, it will have backed up your databases both Full and Log (Differential). 
    Use these backup files for restore, just as you normally would when restoring SQL Server databases.
    Morten la Cour

  • SCCM central site and primary site use the same SQL SERVER with two Instance.

    Hi  Guys,
    I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Sean Xiao
    TechNet Community Support

    Although you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has  problems, all the data will go away and you will not have data redundancy.
    You need to configure the different SQL Port and SQL Broke service port e.g.
    SQL port 4023  SQL Broke Service port 4022 for CAS instance
    SQL port 4024  SQL Broke Service port 4021 for PRI instance
    Juke Chou
    TechNet Community Support
    I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
    to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
    You can read more about Network Ports used by Configuration Manager here
    http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
    /Tim
    Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

  • If you already bought the windows version of office (Microsoft, Powerpoint...) can you run it on the macbook pro? Please help.

    Can you run the windows version of Office 2010 on a macbook pro? please answer back.

    Yes, if you use Boot Camp to run Windows on your Mac, Microsoft Office 2010 will be able to run without any issues. If you want to run Microsoft Office from within Mac OS X, you would need to purchase Microsoft Office for Mac.
    Hope that helps, have a great day.

  • Can you run multiple iPods on same computer?

    I have a "regular" ipod and have successfully loaded iTunes (dated 10-12-2005) on my pc. My husband just bought a shuffle but we cannot seem to run them on the same pc. Why not? iTunes just will NOT recognize the shuffle. I have successfully loaded the shuffle on our kids' pc; but all 2,000 songs are on my pc. I DON'T want to reload all of them. ANY suggestions? Comments?
    I did try to update the iTunes. Ran into other problem - iTunes wouldn't even start - had to uninstall/reinstall.
    Dell   Windows XP  

    I had the same problem with iTunes not recognizing my
    iPod Shuffle. What I did to fix the problem was to
    download the latest version of the iPod updater and
    select the restore option. It should reset the
    factory settings and flash the device with the latest
    software. I recommend trying to get iTunes to
    recognize the shuffle on its own, and then connecting
    the additional unit.
    Sounds great - but every time I load updater I cannot even start iTunes. VERY frustrated.

  • Can two Portal install share the same Ap Server?

    Portal 3.0.9
    Solaris 8
    Hi All,
    Is it possible to install two versions of portal on separate machines and configure it to share the same
    application server where one of the Portals is installed?

    Correction:
    In my previous post I meant to say Apache HTTP Server
    instead of Application Server.

  • Can two Instances of Planning share the same SQl Server Instance?

    Hi
    Can anyone clarify me on the below
    Is it possible to have our DEV and TEST instances of planning (on different host servers) point to different tables in the same instance of SQL Server 2005. I know that the apllication databases can be directed to different table names but what about the core tables:
    FSDHAADMS
    FSDHBIP
    FSDHSS
    FSDHPLANAPP
    FSDHPLANSYS
    Thanks in advance.

    I think it will work. As long as you create separate SQL databases for the planning system files for dev and prod on the sql server. If your planning web for dev is deployed on server x, and planning web for prod is on server y, when you run config utility on server x you would point to the SQL database u created for dev. Repeat on prod when u run the config utility just point to the planning system database you created for prod.
    haven't done this myself but sounds possible.

  • Can you use FaceTime on the same wifi connection

    My daughter and I are trying to FaceTime each other. We r both using the same Internet connection. When I FaceTime her on my ipad2 it's ringing from my end. But she is not reciveing any ringtone on her iPod touch. And when she tries to FaceTime me the same thing happens. Is it because where both connected to the same wifi?

    What is a SW issue? The iPod is the latest one has the FaceTime app. We both have different email addresses. Also having trouble with I message my daughter recives my messages but goes to  her email and not to her imessage and she can't send me messages. Always says not delivered.
    Have tried everything.

  • Can you use iMessage on the same Apple ID, on more than one device at the same time?

    I have an iPad and want an iPod Touch this year, and I was wondering if I could use my iMessage signed into both at the same time? Whilst on the same Apple ID. Thanks for any help.

    Thanks

  • Can I run Servlets in the Sun App Server?

    I am trying to run a servlet. I am not sure if I can run the same using the Sun app server. any help to clarify the following queries would be appreciated.
    1. Should I have to specify a path in the environmental variables?
    2. Is there a web site that tells me the same with respect to running the servlet on a Sun app server.
    Thanks in advance.
    --Srikanta                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

    I'm not sure what you want in regards to question, but I can assure you that you can run servlets in S1AS7. My recommendation is to just package your servlet into a web archive (war) and deploy it. You can deploy it via the commandline (asadmin) or the web based administrative client (likely http://localhost:4848). For more information on this I suggest reading:
    http://docs.sun.com/source/816-7150-10/index.html
    You must likely want to read the section on assembling and deploying web applications.
    Matt Bauer

  • Can you store an Image in MS SQL Server 2005

    Hello,
    How possible is it to store customer uploaded images to MS SQL Server 2005.
    Any examples and is there a down turn to retrieving the data from the DB?

    How possible is it to store customer uploaded images to MS
    SQL Server 2005.
    Yes, you can store binary data in a BLOB (varbinary) column. Google turns up tons of hits on "storing images in sql server 2005". For example
    http://www.databasejournal.com/features/mssql/article.php/3719221/Storing-Images-and-BLOB- files-in-SQL-Server.htm
    Any examples
    http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=Images_05.html
    is there a down turn to retrieving the data from the DB?
    It requires more database storage. So it can bloat your database. Plus there is the resources involved in retrieving the images from the database. Usually, it is better to just store the file path and save the actual image files on the file system.

  • Can I run a soft without install sql server?

    I just wrote a winform C# program and use SQL server 2012 for data. 
    Can I run this program on other machine without install sql server ? 
    If I can't. Are there other program simpler than sql server help me run it ?
    THANK ALL !

    Agree with Nicolas. You need to modify connection string to point to proper server name. This might help in getting proper name of instance.
    http://sqlserver-help.com/2011/06/19/help-whats-my-sql-server-name/
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Can my wife andI use the same smpt server to send emails

    I am trying to set up email accounts for both me and my wife on the same imac running mountain lion.
    My account was ok, but when I try to set up hers the SMPT server says ( offline ). Although the incoming ( POP ) server is the same. Cannot the outgoing ( SMTP ) server be the same ?

    I would suggest you try the following.  On my iMac it solved the same problem.  Set up both yours and her Mail Accounts with the correct SMTP Server, whatever it is, in the provided line and THEN Select the nearby Box "Use Only This Server":
    Hope this helps
    Message was edited by: Radiation Mac

Maybe you are looking for

  • Oracle 10g installation on AIX

    Hi, Could any one provide me any reference/help documents on how to install Oracle 10g software on AIX box?. Regards, Nagarjun.

  • Events not appearing across event-spanning days in ip 3gs

    Can you help pls I have a 3gs syncing via excange server. seems generally ok but events spanning several days do not appear in the iphone - just the start entry (eg in an event spanning 5 days, just appears in iphone on first day). The full event doe

  • I have more than 5 authorized computers?

    I just downloaded Itunes on my laptop and went to sync my ipod with itunes. I was told I already had 5 computers authorized and I'd need to deauthorize a computer in order to get my laptop to sync and all that jazz. Well the problem is I'm a good 300

  • I lost e-mails after synching to iCloud

    After synching to iCloud, I lost hundreds of e-mails in Smart Mailbox Folders. I do not have Time Machine. Any thoughts?

  • My Podcasts are not in the iTunes Directory

    I have submitted 4 podcats to iTunes several weeks ago. I recieved email confirming that they had been accepted. When I look for them on the iTunes Directory under the category I submitted them to, they are not anywhere including Browse All... when I