Can you run two separate vi's in parallel

Can you run two seperate Vi's in parallel? Will this make response considerably slower?
Solved!
Go to Solution.

eugeniap wrote:
Hi, what more detail is needed? They are two entirely seperate independent vi's with no shared sub vis.
I just wanted to know if you can run two independent vi's at the same time, as in just have two seperate programs and run them.
Separate isn't the same as independent. That's why they wanted more information.
Your second question asked about slowed response. That's another place you didn't offer anywhere near enough information for a true answer. How many loops are you running in each of these independent VIs? How many cores does your processor have? Are you including a 0ms wait in your loops to avoid railing your processor?
It's possible you'll see such a negligible change in processing that you won't notice. It's also possible you'll feel like you're draining your system. It's generally best to err on the side of too many details rather than too few when you're asking questions. If you don't know the answer, you likely don't know how each piece plays a part in the answer. More information allows others to pick out the relevant pieces and give you a better answer.

Similar Messages

Apple TV + Airport Express can you have two separate streams?

Can you run two separate streams using an AE to a stereo and ATV2 to a separate TV/stereo combo?

CaptFred,
Thanks. This is what I just figured out. I can't send two separate streams via remote or direct off the main computer (iMac). However, with the iMac streaming to Computer, AE, & ATV2 . . . I can pull home Home Sharing of the iMac from the MBP. If I select the already active AE speakers, the MBP tries to connect and says they are in use. When I select the AE speakers from the iPhone remote and turn them off (via remote) I can then select them from the MMP and stream different music to the AE (the other iMac originated stream continues uninterrupted).
Thanks again for kick to go try it .

My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

My husband does not have an itunes account and wants to set one up and we only have the one computer. can you have two separate accounts? We want to set up separate iphones.

How to use multiple iPods, iPads, or iPhones with one computer

HT204053 can you have two separate iCloud accounts on one iMac device?

can you have two separate iCloud accounts on one iMac device?

You can have only one iCloud "user configuration" per local user on the Mac. Who the local user belongs to doesn't mind. Since it's a local user it's not related with who actually uses it. So let's say you want to set up Photo streaming using your iCloud user, just configure iCloud (under System Preferences) the same way you did on your phone and you're done.
But, beware: if you're only interested in synching photos, uncheck everything else when configuring iCloud on the Mac, otherwise you will merge, for example, your husband contacts, calendar and mail with those on your phone.
If you want to avoid any problems you can easily create another local user on the Mac with your name, under System Preferences, System, Users & Groups. After you create the user, logoff. The Mac will ask if you want to disable autologin (since there's more than one user that can log in now), answer yes and you will be presented with a logon screen. Click on your account name, insert the password and configure iCloud to sync with your phone.

Can you have two separate icloud accounts for two iphones that sync with the same imac?

can you have two separate icloud accounts for two iphones that sync with the same imac?

Welcome to the Apple Community.
Yes and no.
There is no issues at all if you use two user accounts on the mac, each can sync with one of the accounts.
If you are using a single user account, you can add the second account as a secondary account in settings > mail, contacts and calendars and you can then sync mail, contacts, calendars, notes and reminders from the second account, but not documents and data, back to my mac or photostream.

Can I run two separate versions of the LabVIEW Run-Time Engine on one PC?

Hello, I am curious if anyone knew if it is possibly to install and use two separate versions of the LabVIEW Run-Time Engine on one PC? I currently have the 2009 Run-Time Engine installed on one machine and wanted to install the 2011 Run-Time Engine as well. I know that you can run two separate versions of the LabVIEW program on one machine, but what about the Run-Time Engine?
Thanks!
Solved!
Go to Solution.

I'm guessing this is a bug that NI needs to fix. I see no reason you shouldn't be able to install the run-time engine of an older version. I'd be interesed in if it allows you to install the older development environment, which also includes the older run-time engine. There are some command line switches for NI installers as mentioned here:
http://digital.ni.com/public.nsf/allkb/C361087EE9F20810862577850073128E
I wonder if there is a force install option.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Can you run two iphones on one account

Can you ? Two phones sync on one account .

I have two iPhones and daughters basic cell on a family plan here in US (AT&T). Each iPhone requires it's own data plan (charge) to be applied to the one account (bill).
But I would say call the cell provider as they are the ones that provide service for the phone, while Apple is about the hardware. We all here are users and can tell you what we think or heard or experienced but only fact can come from the provider.
Message was edited by: DaVBMan

Can you have two separate iTunes files on one computer?

I gave my daughters each an old iPOD. One is 20 GB and the other is 60 GB. I take an iBOOK laptop with me when I visit so I can update them. In the past, they shared the 20 GB iPOD only. Now I have a problem as one iPOD can store a lot more than the other. Is there any way to have two separate iTUNES files on one iBOOK computer, one with the songs for the 20 GB iPOD, and the other for the 60 GB iPOD?

The problem with making separate accounts is that this is a laptop, so likely not a huge hard drive, and if the three iTunes libraries need to have a lot of the same music (because everyone or two or three like some of the same stuff) you end up with double or triplicate copies of the music on the hard drive eating up drive space. Since they don't use his laptop normally, creating more accounts (with all the associated files and drive space usage each account would eat up) it probably isn't worth it.
Instead, the best approach is like Chris said, to make playlists for the girls in the main library and then set up the various iPod to either sync everything (if big enough) or sync only specific playlists (if not big enough).
Alternatively, they can set their iPods to manual syncing and then when Dad is visiting they can hook up their iPods and "shop" the library and drag in whatever they want to add to the iPods and delete what they no longer want.
Patrick

Can you have two separate itunes accounts on one pc

I currently have my own itunes account on a Dell laptop that we want to get rid of and will be using another Dell laptop that already has another itunes account on it. Can there be two accounts on one laptop. If yes, how.

Yes, by using separate Windows user accounts, or if you mean iTunes libraries, starting iTunes with the Shift key held down as needed.
(65524)

Can you have two separate iPods on iTunes without having the same songs?

My husband and I both have iPods but we don't want to same music on them. Really we would like to have two separate iTunes, so that I don't get his music and he doesn't get mine. Is that possible or do we just have to manually sync them?

Click here for options.
(37526)

Can you run two songs at once? One to write and one to record?

I have dozens of midi objects, cable routings for writing and now have added dozens of audio tracks and inputs for recording my external and internal synths. (24 tracks in realtime one pass. Not bouncing but tracking. Its so cool.)
PROBLEM: As I improve the audio workflow in a song, importing that layer into older songs creates D.I.S.CO.R.D. (Digital Input Sequencer Copy Object Reassignment Disaster!)
QUERY: Can I just use one song for writing and playing and then run another "audio input based" song in the background locked via internal time code so it can RECORD or CAPTURE what this song plays?
Or is there finally a way to import audio layers without "rebuilding the whole house"?

Maybe I'm not understanding your difficulty, but I
don't see why you have to have multiple setups, or
copy/paste/import/whatever from one song to another.
..........Been tracking and mixing in the same sequence for
years.
Why? Well......
1) there's dozens of midi modules, virtual modules and custom transformer splitter objects at the writing stage,
2) dozens of tracks, input objects and reverb busses at the "tracking stage"
3) and multiple master inserts at the mixing and output stage that output anywhere from 2 to 24 stems with their own reverbs.
When the room works it works beautifully but there are different configurations of the above for a tv series gig, movie gig, album gig etc and I'd love to be able to change config 2 or 3 without having objects jumble all over config 1.
I write and work in combinations of old and new gear from Spectrasonics and NI softsynth engines to an Oberheim Expander Roland JX10 and and Yamaha TX 816s. They all have different personalities and all work reliably and have far outlived their sys ex storage software (remember Galaxy/Sounddiver? Bye Bye since System 10)
Last year I expelled my dig gear (after too many DAE errors for all that money) and I went MOTU native and love it. But I started one interface at a time and built up my new tricks and routings gradually. As a result everytime I add another MOTU interface and change some routings around all my songs have to be retaught new routings even when its just callin up a midi writing template. Hence the need for better importing of environents or a way to reliably alter one area of the above without having to recheck all the others. And it may mean a 2 computer rig. The second computer becomes the "multitrack/master recorder", and only changes during a major upgrade while midi modules and virtual synths can come and go on computer 1.
In a few weeks my studio setup tech will come in and we'll redo all our flow charts which I'll send to you if interested. Then you'll either empathize with my problem or think I'm nuts.
Thanks for your continued interest. Its nice to lament to someone who at least knows the vocabulary.
Amin
G5 dual 2.5 Mac OS X (10.3.9) Stylus AND my original Minimoog. Lots of MOTU. No more Digi.

Can I run two separate ITune Accounts & Libraries and ipods on one computer

I have a friend visiting for a month and they want to use their IPod Nano and ITunes account on my computer. i.e. purchase and download their own songs via Itunes, sync with their Ipod etc. the same way they would on their own home computer, while they are here.
I already have Itunes installed on my computer for my own IPod Shuffle, and related account for buying music etc. and want to continue to sync my Ipod through my own account of course
Is there a way I can have both of these Ipods functioning fully with separate Itune accounts and libraries on my computer? How do I do this?
Thanks for any help you can provide.

OK.... I've ran into a problem and don't know how to proceed with this.
The 2nd user is set up with their ITunes account and we have successfully purchased a few songs.
What I expected to do was sync their Ipod and have the songs already on their IPod copy into the "new" Library we just set up. However, indications are that if I use "sync", it will erase the songs presently on the IPod and then only put back the few new songs we just purchased. (I tried a few other things but cannot get the songs from the IPOD into the ITunes Library or any other folder to preserve them)
1. If it is even possible, how do I get the songs off the IPod into the newly established Library?
2. If I indeed cannot sync the IPOD / Library - how do I get the newly purchased songs from the Library to the IPOD without erasing the songs already on the Ipod.
Thanks, hope you can help!

Can you have two separate products appear on Newsstand if they live in the same Enterprise app?

A client has two sets of publications - a weekly and a monthly.
We ideally want to build an Enterprise app that houses all their weekly and monthly publications. Both products need to appear in Newsstand.
Is this possible? If so, how do we partition the app so that the publications are separate? I assume we would need a custom storefront as well.
Thanks

Hi,
If you want to create 2 separate apps on Newsstand then you need to build and manage these separately. This requires you to create 2 separate App IDs and build separate apps using App Builder.
Remember that folios are always uploaded into a specific application account. This means you'd have to create a separate application account for the other app and only upload the folios you'd like to see in that app.
Do note that apple will probably give you issues if you offer the exact same content twice, so they'll reject the app. If you do want to differentiate between users only getting the weekly vs monthly issues I'd suggest you use an entitlement server.
Bart

Can you create two separate tile views for a Promoted Links List

I have lots of pages on my site where i want the effect of the promoted links list tile view. However, i don't want the same links to show up on every spot i use it. Is there not a way to create separate tile views so you can create filtering conditions?
Right now i am stuck having 5 separate lists with 5 items in each because of this limitation. Am i missing something?
I look forward to your responses.
~Zach

There is an easy way to do this.
Add columns to the Promoted Links list.
Add a column named Page.
Type in name of the page on which you would like this link to appear.
Add a column named Row.
Create a view filtered by page name and Row. Example: Show only when Page = HomePage AND Row = 1
Create another view filtered by page name and another Row. Example: Show only when Page = HomePage AND Row = 2.
Go the page you would like the links to appear. Edit the Page.
Add Promoted Links app part (still not used to the app thing) and select your view for Row 1
Add another Promoted Links app part and select the view for Row 2.
Lather, Rinse and Repeat.
Tamara Bredemus SharePoint Minion...working up to Maven

Can You Have Two Separate Quizzes in One Captviate SCO?

Greetings,
Here is my problem:
Ideally I would like this question addressed via the other problem I posted to the board just a moment ago (re: multi-SCO package freezing at the end of the first SCO). HOWEVER, I would take this solution as well:
We want two have three parts to our SCOS.
1. Pre-Test
2. Instructional video
3. Post-Test
The learner need not pass the pre-test to proceed to video, nor do they need to pass the pre-test to pass the course. The pre-test is really just a knowledge check. The video must be watched, and the post-test must be taken and passed.
When I try to insert multiple quizzes in Captivate, it only lets me put in 1. Even if I split the test w/ a video, it treats it as one test. Even if I make the initial quiz questions suvey, it treats it as one test. The reason just making them survey questions won't work is because if they want to re-take the post-test (which we want them to be able to do), they have to go back to the first slide.
I'd like the pre-test scored as a quiz, then the video, then the post-test taken and scored as its own quiz. It SEEMS like this ought to be possible, seeing as I am almost positive that you can have mutliple quizzes in a Presenter SCO (and that you can do that in Articulate and Lectora), but I am not seeing how.
Thoughts??

Hi there
Sorry, but any given Captivate project is considered to be a single Quiz. If you want things to be different, please alert Adobe to it by submitting a Wish Form to ask for it in a future version. (Link to the Wish Form is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can you run two separate vi's in parallel

Similar Messages

Maybe you are looking for