Can you set a default print quality?

Good Morning Everyone,
I've been putting up with this annoyance since I install PSE 8. I've looked for a solution but can't find one. Hope you can help.
Here's the problem.
Every time I print a document PSE 8 defaults to a print quality of 1200 dpi, which take forever to print. So I have been clicking on
Change setting, then if I click on the drop down box for print quality the only choice is 1200, so I click on advanced setting and choose
normal (which is 600) click ok and print. But I have to do this every time I print. I'm using a HP C3100 all in one printer and I've check the printer
properities and they are set to a default of normal (600 dpi). Any ideas?
Thanks
Nancy

Nancy,
We have had several posts recently relating to printers and PSEv.8. Check on the HP site for updated drivers for your model. If there is an updated driver, install it. Let us know how you make out.

Similar Messages

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

Can not set the default printer

Hello,
we have HP LaserJet Pro MFP M125-M126 PCLmS network all in one printer, as the installation in every user was successful, and was working fine on installation day, after a day all user facing issue like can not set default pritner , can not print, all user are facing issue at a time,
prompt reply is appreciated,
This question was solved.
View Solution.

Hi @darshan9 ,
I see that you are experiencing issues setting the default printer for users and you are unable to print over the network.
I would be happy to help you.
Do you mean individual computers setup with the printer over the network users or one computer with multiple users?
Do you have Admin Rights on the computer to make changes?
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
I would suggest you to check if you have a different user account or from an administration account.
I would also suggest you to create a new user account and check if you are able to set the printer as default.
Create a user account. Create a user account.
If you are still having issues run the Fixit Tool. Diagnose and fix printer and printing problems automatically.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP1510 0x00000709 can't set as default printer

I have installed my new printer HP1510 on computer with Windows 7, but I cannot set it as default printer in Control Panel, get error message 0x00000709. This means that I cannot print pdfs as my previous printer, which I have uninstalled, is still shown as the default printer in Adobe Reader. I can print emails ok. Please help as I bought the computer to print pdfs!
This question was solved.
View Solution.

Hello lanto17,
Welcome to the HP Forums!
I understand you are unable to set your printer as the default and are experience PDF difficulties. Please try these steps to address all of your issues:
Go to Start, type Regedit in the search bar. Right-click on it and select "Run as administrator". Now, locate the following key:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
You need to give this key full permissions. To do this:
a) Right-click on the key that you need to edit and/or delete. Click on "permissions..."
b) Click "Add" in that Window that appears.
c) There will be an empty box under "Enter the object names to select". Type "Administrator" (without the quotes), then click on "Check Names".
d) An Administrator name will appear, click "Ok" when it does.
e) You should be able to select (click) the Administrator profile under "Group or user names". Once clicked, click on "Advanced".
f) Click on the "Owner" tab.
g) Click on the Administrator profile, then put the check-mark in "Replace owner on subcontainers and objects".
h) Go back to the "Permissions" tab, and ensure the Administrator profile is selected.
i) In the "Permissions" tab, put a check-mark in every box available. The boxes will likely be indicated by "Include inheritable permissions from this object's parent" and "Replace all child object permissions with inheritable permissions from this object".
j) Next, click "Edit". Put a chark-mark in "Full Control" under Allow. Click Ok. Now, click Apply (you may receive a Window security message, just click "Yes"), then Ok.
k) Exit the Registry, then restart the computer.
The last step is restarting the print spooler. To do this, type services.msc in the search bar. Right-click on it and select "Run as administrator". Look for the Print Spooler and Stop it, then Start it.
Now try setting the printer as the default and printing PDFs. Let me know what happens. Thanks!
Have a wonderful day!
Mario
I worked on behalf of HP.

Can you set a "default" web page in a KM folder?

Hi there,
I've been playing around with using Adobe Contribute to edit web pages in a CM Repository. It was easy to create a CM repository, put some web pages and supporting CSS, images etc. in there, and create a KM navigation iView that displays the default page. Setting up Adobe Contribute to edit those pages via a WebDAV protocol was simple too, and to be honest I find the Contribute interface and functionality easier to use (particularly from the average end user's point of view) and implement than the Portal's built-in HTML editor, or the Web Page Composer.
But then I ran into a snag. In order to be able to "administer" the site with Contribute (or Dreamweaver), it creates an _mm folder and puts a "guard" page in it. The guard page is a file which would be returned to the browser when it tries to access a folder. In a normal website that would be a "default" page (e..g index.htm, default.htm etc.), but in the Portal there doesn't seem to be a way to have one. I believe that's why if you try to access a folder through a browser you get:
"The folder you are looking for has no displayable content.
You can try one of the following:
Access the folder using the Navigation user interface.
Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work."
That's what happens if I use something like http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/ as a URL, though http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/default.htm works just fine (as you would expect). And I can retrieve a fake "guard" page using http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/_mm/default.htm
An Adobe technote confirms this as problem - [Guard Page not found|http://go.adobe.com/kb/ts_f3675780_en-us]. Does any one know if a default page can be set in a CM repository.
Regards,
Tom

I don't think you can.
What is possible is to set content on the folder resource itself; that would be returned instead of the page you mentioned.

Can you set the default alarm to be an email alert?

Just curious. I noticed that in the preference window, it allows you to set a default alarm that always starts as a sound.
Any plug-ins that will do this?
Thanks a bunch.

Try this add-on so you can schedule the sending of multiple emails:
https://addons.mozilla.org/en-US/thunderbird/addon/send-later-3/
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
There's another add-on that might work in current TB versions:
https://addons.mozilla.org/en-US/thunderbird/addon/blunderdelay/

Can you set a default "Reply-To:" on a per account basis?

I have two accounts set up in Apple Mail. One is a work account, and the other is my personal iCloud account.
For my personal emails, I would prefer to have any replies directed to an "email-for-life" address. My college alumni association has a service, which is essentially an email forwarder. The beauty of this is that I am not tied to a particular ISP such as iCloud, mobileme, .mac, etc. If I change ISPs, I only have to update the infomation on the forwarding system rather that letting all my personal contacts know that my email address has changed. For them, my permanent email address is of the form "<firstname.lastname>@<college>.alumni.edu". As such, I cannot use that address as my "From" address, as mosts ISP requirethe From address for authentication. I suppose this helps prevent spoofing.
I have seen instructions for setting a Default "Reply-To:" address in Apple Mail by setting the UserHeaders in Mail prefs via a Terminal window:
To set: Enter the following in a terminal window:
defaults write com.apple.mail UserHeaders '{"Reply-To:"="[email protected]";}'
To review settings: Enter the following in a terminal window:
defaults read com.apple.mail UserHeaders
To clear settings: Enter the following in a terminal window:
defaults delete com.apple.mail UserHeaders
My problem is that this sets the default for all email accounts in Apple Mail. I only want to do this for my personal email account. I want emails sent from my work account to reply to the work email addresss.
Is there a setting on the defaults write ... command such that I can apply the UserHeaders to only one account?
Regards,
Tim

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

Tax codes - can you set up default value for rows and freight? HELP!

Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?

Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas

Can you set a default value using Data Mover Scripts?

Hi,
We're going through a upgrade of PS Fin 8.9 -> 9.1. We've found some existing tables with new columns that are marked as NOT NULL so we're having trouble migrating the data using DMS.
Is there a way to Export the data from 8.9 and when importing into 9.1, set a default value for the new column using DMS?
A specific example would be the PS_SOURCE_TBL where EXCHANGE_RATE_OPTN is new and NOT NULL.
Thanks for any assistance.

What you could do is first rename the record to be imported
IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
And then drop table PS_SOURCE_TBL_ORG to clean up your database.

HT204051 Can you set a default WiFi network? Or is it possible to remove a near field WiFi network?

I want to set a default a default network to connect via wifi . Is it possible to automatically connect when in range?

Hi GymJockey67,
Thanks for your question. The resource below explains how to set your preferred Wi-Fi network as the default connection.
OS X Yosemite: Choose preferred wireless networks
https://support.apple.com/kb/PH18525?locale=en_US
Cheers,
Judy

Can you set the default Filter under Admin tab in UCSM?

Such a minor and trivial question but just curious. It defaults to 'Faults, Events, and Audit Log'. A majority of the time that's all you'll need after initial setup, but I was wondering if I could somehow set the filter to 'All' as the default view.
Is this possible?

You can't, Apple would have to do this.

CSV Export - can you set a default directory?

Can the "Save As" folder be defaulted to a specific location when exporting a report as CSV?
I want to try and get all users to store the exported csv files in the same location rather than having them saved on local C:\ drives or various other network locations.
I'm using HTMLDB 1.6 on Ora9.2

Theoretically yes but practically NO!
If yes, then user should install ActiveX(for IE) or java (FF and others) which will be called to determine that setting.
But my suggestion is to leave that setting alone...
BTW, any download that you have done on Interent...was it automatically or was guided by your decision?
;-)

Can You set a Default Email Address when sending Emails

I have multiple email accounts set up. When I compose a new message, it always uses the send address of the message that is selected in the open window. Is there anyway to set a particular address as default or better yet don't pick an address and force me to select one from the pull down list?
Doug Eaton

Hello Doug.
Copied from Setting the account your email is sent from.
If you have set up multiple accounts in Mail, when you create a new message, the account the message is sent from is the one associated with the currently selected mailbox. If the current mailbox is listed in the On My Mac section of the mailbox list and is not associated with any particular account, then your message is sent from the first account listed in the Accounts pane of Mail Preferences.
You can select a different account to use to send the mail.
To send a message from a different account, choose the account from the Account pop-up menu when you're composing the message.
To change the order in which accounts are listed in the mailbox list, drag the account names into the order you want. You can also rearrange the account order in the Accounts pane of Mail Preferences.
Tiger Mail includes a default email account selection when selecting New to compose a new message regardless which mailbox is currently selected.

How can you set the default width of the 'Detailed Navigation iView'?

Hello,
we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
So far, we havn't found the right item in the portal admin to do this.
Any help would be much appreciated! Thanks in advance.
Frank Schülke, E.ON Ruhrgas, Germany

Hi Frank,
You can change the width of this navigation iview by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
upload the changed par file and restart the server.
Hope this helps,
(if not do get back )
Regards,
Uma.
Do award points for helpful answers in SDN!!!!!!!:-)

HT1677 Where can you set default in Safari to view as web page instead of Mobile Version?

Where can you set the default setting in Safari to open page as web page instead of Mobile Version on iPad running iOS6.01?

And, to make it even more fun, sometimes a website changes how it deals with Safari Mobile. A website that treated it like a desktop browser suddenly starts treating it like a cell phone. Just to mess with you. Or push an app.
Best of luck.

Can you set a default print quality?

Similar Messages

Maybe you are looking for