Can you specify ink trapping for a PDF document within Acrobat Professional, after a PDF has been cr

(File > Properties > Advanced > Trapped)
In other words, does this specification really change the ink trapping of the PDF, or does it just change a document information metadata tag?
Or, does ink trapping have to be specified when the PDF is created, in the application that creates the PDF?

Your assumption is correct. That field entry will not affect or perform trapping.
Trapping does not have to be performed by the authoring program. Better results are obtained via the RIP/software/system processing the image data.

Similar Messages

Can you specify the port for default services when installing OEG?

Hi everyone,
The default installation of OEG 11g uses 8090 port for management services, and 8080 for the virtualized services that you register in the gateway. After installation, you can change the ports by editing gateway's Profile Repository in Policy Studio. But is there a way to specify the port number before/during the installation?
Thanks,
Iris

Hi -
here are the steps to change the listening port (in 11.1.1.6)
- Connect to OEG using Policy Studio
- Click on "Edit Active Configuration"
- Under "Services", find the default services, and you'll see a listener for port 8080 there. Right-click to edit this.
- Change the port from 8080 to your desired port. Note that if you've installed the software and running it as a non-root user on Linux, then it will not have permission to bind to a low-number port (like port 80 for instance)
- Now deploy your change (for 11.1.1.6 hit F6 or click on the "deploy" button which is towards the right of the toolbar in Policy Studio).
- You may also choose to version your configuration at this point (click on "version" which is beside the "deploy" button and enter a comment about your version).
Now verify that OEG is listening on your new port. You can see it bind to the new port by looking at the trace [Connect a browser to port 8090 on OEG, login as admin or another user who has rights to view the trace, then click on "Trace"].
It's a usual practice to configure a new listener on SSL (e.g. on port 443) then to delete that pre-configured port 8080 listener, if you want to only receive traffic over SSL.

Can you specify format mask for date or timestamp columns

Hi,
Recently when I'm developing a PL/SQL application, I find that any format mismatch between data in table and format mask specified in to_date/to_timestamp function will cause exceptions. However, I'd like to make my application more robust and immune to this kind of problems, and know exactly which format mask to use for exactly what columns in db table.
Is there a way in a table column to specify the format mask for date/timestamp columns such that I can know exactly what format mask to use when doing conversion? Also I don't want to depend on NLS_DATE_FORMAT specification, don't want to make a long case statement to check for every date format allowed by Oracle.
Many thanks.

As per my knowledge it can't be possible
casuse if you entered '12/11/2007' date
how oracle know that in date 12'th is the month or 11'th.
The person who entered that date will also have confusions in future.
either you have to fix one date format for your whole application (application configuration).
or you have to store the date format in other column of the table.
In case you set the date column to varchar and store all the dates without format then
in future you may face problems in future while fetching the records, searching etc.
Regards
Singh

Can you specify the links for WAS Java Adminstration

Hi,
Is there any links ( documents) that specify each services that runs in Visual Adminstration? of WAS Java stack.
Regards,
Daniel..

Hi,
I think you are looking for this link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/61/e176cb3fd64848966ecb58f8eecba2/frameset.htm
Hope it helps.
Regards,
Siddhesh

Can you specify a range for x coordinates

hey folks,
I'm looking at a I think a pretty basic request. This code below works, but I'd like to modify it so that if my dragged item passes over a region in the x coordinates. So if I pass the dragged item over the range of 600 - 700 then it would play the frame labelled "square", and when it passes out of that region, go back to play the frame labelled "circle". So realy I'm asking how can I modify the <=600 to instead 600 to 700, and else refer to circle.
Hope this makes sense.
if (me.x <=600){
me.gotoAndStop("Square")
} else if (me.x>= 700){
me.gotoAndStop("Circle")

I'm not really sure I follow your description, but the following will do what I was able to interpret...
if (me.x>= 700){
me.gotoAndStop("Circle")
} else if (me.x >=600){
me.gotoAndStop("Square")
That ignores anything below 600. If you want to have anything below 700 go to the square, then just use 'else' instead of 'else if(me.x >= 600)'

Can you see ink levels from Eprint center for the OfficeJet 7500A/E910

Can You monitor ink levels from eprint center for the OfficeJet 7500A/E910?
This question was solved.
View Solution.

Hello Raimonds,
To answer your question, you are not able to check your ink levels from ePrint Center. The only thing that you can do in ePrint Center is monitor the status of your recent print jobs that you send via ePrint and monitor the status of connection of your printer to the ePrint Servers.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Hi, I bought this some 80 euros option, but now when I triet to send BDF-file 88.0000 kt, it didn´t work at all. Said "couldn´t do this work". I am very disappointed. Can you do asap something for this problem. Vesa Laukkanen, LL.Lic. laki.vesa@pp.kpnet.f

Hi, I bought this some 80 euros option, but now when I triet to send BDF-file 88.0000 kt, it didn´t work at all. Said "couldn´t do this work". I am very disappointed. Can you do asap something for this problem. [email protected] This is very important service but it must work!

Hi vesa laukkanen,
It sounds like you're referring to an Adobe PDF Pack subscription. What process are you having trouble with? Are you trying to create PDF files, or combine them? Please give me a little more info about where you're running into trouble, and I'll do what I can to help.
Best,
Sara

Can you use a 3600 for an Ethernet bridge??

Can you use a Cisco 3600 to do a P2P bridge? Using the MAP's ethernet port to connect to a remote LAN? On that remote LAN can you have lightweight APs that connect to a controller on the RAP side?

Can you use a 3600 for an Ethernet bridge??
http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_mesh.pdf
Check - Converting Indoor Access Points to Mesh Access Points
Ethernet bridging has to be enabled for the following two scenarios:
1. When you want to use the mesh nodes as bridges.
2. When you want to connect Ethernet devices such as a video camera on the MAP using its Ethernet port.
Wireless Backhaul:
In a Cisco wireless backhaul network, traffic can be bridged between MAPs and RAPs. This traffic can
be from wired devices that are being bridged by the wireless mesh or CAPWAP traffic from the mesh
access points.
Guidelines For Using Voice on the Mesh Network
• Voice is supported only on indoor mesh networks in release 5.2, 6.0, 7.0, and 7.0.116.0. For
outdoors, voice is supported on a best-effort basis on a mesh infrastructure.
other factors to note:-
#you would be running on backhaul using A radio which is prone to DFS.
#CAPWAP may not tolerent enough with AWPP convergence on MAP roaming.
#CAPWAP is more latency sensitive than voice.

Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

Yes. See:
How to use multiple iPods, iPads, or iPhones with one computer

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

Can Adobe Distiller be used for converting all pro/e (3D -2D) files to pdf format?

Can Adobe Distiller be used for converting all pro/e (3D -2D) files to pdf format?

Acrobat Distiller Server converts Postscript to PDF.

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

Can you buy Creative Cloud for a single month? Or do you have to buy the membership which lasts a year? If so can you cancel the membership after a month and only pay for that month.

Can you buy Creative Cloud for a single month? Or do you have to buy the membership which lasts a year? If so can you cancel the membership after 1 month and only pay for that month?
Thanks

Hello Tom,
You may sign up for a free trial of creative cloud which you can check out here. Download a free trial or buy Adobe products | Adobe downloads
You may either pay for a month to month membership or annual as listed here. Creative Cloud pricing and membership plans | Adobe Creative Cloud
Let us know if this helps!
Thank you,
Jo-Marie

Can you share some links for SCM & MFG on Fusion ?

Can you share some links for SCM & MFG on Fusion ?

I was under the impression that having a journal would be safer, not just for the boot drive. Any volume that is not properly unmounted before removed (or the couputer is turned off) might be left in an incomplete save state, since data might have been saved to buffers only, not to the disk proper.
To me safer would be better. Apple has added journaling to HFS+ which is good, and there are several journaling file systems for Linux. Nothing in common. Not even with Windows. I guess I will have to use HFS+ with the journal turned off, but it seems suboptimal to me.
/T

Can you establish different sounds for multiple emails?

Can you establish different sounds for multiple email accounts?

Sorry no, sound/alerts is universal for different email accounts.

Can you specify ink trapping for a PDF document within Acrobat Professional, after a PDF has been cr

Similar Messages

Maybe you are looking for