Can you switch between AT&T and Verizon 3g on the Ipad?

My wife purchased me the Ipad2 32g 3g for the holidays. It is set up for AT&T. Is there a way to switch to Verizon?

If you are within the return period, return the iPad and get the Verizon version.  But be advised that if you might travel outside the US with your iPad, GSM which is the technology AT&T uses is much more used in other countries and would give you the ability to purchase a Micro-Sim outside the US and use 3G service.  Verizon's CDMA technology does not use Micro-Sim's.

Similar Messages

  • Is there any way I can use continuity between an iDevice and a Lumia? (The iDevice being an iPad or iMac)

    Is there any way I can use continuity between an iDevice and a Lumia? (The iDevice being an iPad or iMac)

    Continuity requires OS X and iOS. At least one of the devices you mention is lacking those... So no.

  • Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

    Premiere CS4
    How can you import QuickTime (.mov) videos and which settings for the sequence?
    Please reply in plain English or if possible in German
    Greetings from Vienna, Peter

    I have not installed Quicktime.
    I got a few scenes (.mov) from a Canon Eos 70d.
    I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

  • Can you enter a custom recurring entry in calander from the iPad?

    Can you enter a custom recurring entry in calander from the iPad?

    Unfortunately, no you can't with the built in calendar app. Take a look at some of these apps. One of them may work for you.
    http://appadvice.com/appguides/show/best-calendar-apps

  • Can you help me sync music from my computer to the ipad?

    Can you help me sync music from my computer to the ipad?

    It's discussed in the iPad User Guide:
    iPad User Guide - For iOS 7 (October 2013)Nov 1, 2013 - 23 MB

  • Can you run logic 6 pro and logic 7 on the same PPC?

    I was wondering if you could run logic 6 and logic 7 on the same computer.

    Until I moved up to my overqualified quad G5, I would use Logic 7 and 6 under 10.3 and I used to run the old 6 under OS9 on occasions where I needed to use a couple of plugins that didn't seem to make the port from VST to AU. It seemed that everytime you updated 6, it created a new version and you were able to keep older versions if you liked ( and I did ) for whatever reason...my thinking was that if the newer upgrade didn't work, I could always go back a step. This is no longer an option though, is it! Progress?
    Overqualified G5 Quad   Mac OS X (10.4.7)   MacBook Pro 2.16, G4 933, G3 200, Powerbook G4

  • How can you tell between Week 37 and Week 38?

    Hey everyone. Well it took me some research to find out the difference between week 37 and week 38.
    So to clear up with future readers that arent sure, The "week" refers to when the ipod was made.
    Anyways, is their a visual difference on the box display? I know you can tell by looking at the serial but im nervous with targets "no return if opened" policy.
    And if I did open it, would a warranty (I would buy seperatly) cover that if their were problems?

    The week 38 box has Macy Gray on the front.  I do not remember who week 36/37 was, but some week 37's had Macy Gray on their box as well.  So, the ONLY way to know for sure if you have a week #38 is to look at the "SERIAL NUMBER IS LOCATED ON THE BACK OF THE BOX"!  You DO NOT have to open the box to see the serial number!  So that should resolve Targets issue.
    NOTE~~~~ Apple has released a firmware update 1.1.1, which appears to have resolved the screen problems that plagued week 37.  However, if you are buying NEW, don't mess around and get a 38!
    Gunny

  • How do you switch between 64-bit and 32-bit Java configuration?

    I've downloaded the latest Java plug-in for an online service, but when I go to run the service on Safari or Firefox browsers, I get a message that 32-bit Java is needed and my machine is running 64-bit.  How do you switch back and forth?

    Similar concern here. No 64 bit version. I purchased the Photoshop CS5 downloadable upgrade. I  have installed the program but only see the 32 bit version. Image  / Mode shows 8, 16 and 32 bit versions and no 64 bit.
    Start Programs offers only a single version of Photoshop which based on the splash screen is 32 bits. Did I miss something during the install?
    Bob

  • How can you add your own print and export buttons to the CR viewer toolbar?

    I posted a previous question that was asking how to get around the Information Bar in IE7 when you export and print.  Unfortunately the CR viewer file download code gets blocked by IE7 because the buttons don't directly download the file.  However, I have been able to get a regular button that calls the following code and streams the file to the client and IE7 does not block it. 
    Sub PrintPDF(sender As Object, e As System.EventArgs)
         Dim crReportDocument as ReportDocument
         Dim crExportOptions as ExportOptions
         Dim crDiskFileDestinationOptions as DiskFileDestinationOptions
         Dim Fname as string
         CrReportDocument = New ReportDocument()
         CrReportDocument.Load(Server.MapPath("estactionlist.rpt"))
         Fname = Server.MapPath("./") & Session.SessionID.ToString & ".pdf"
         CrDiskFileDestinationOptions = New DiskFileDestinationOptions()
         CrDiskFileDestinationOptions.DiskFileName = FName
         CrExportOptions = crReportDocument.ExportOptions
         With crExportOptions
              .DestinationOptions = CrDiskFileDestinationOptions
              .ExportDestinationType = ExportDestinationType.DiskFile
              .ExportFormatType = ExportFormatType.PortableDocFormat
         End With
         CrReportDocument.Export()
         Response.ClearContent()
         Response.ClearHeaders()
                    Response.AddHeader("content-disposition", "attachment;filename=test.pdf")
                    Response.ContentType = "application/pdf"
                    Response.Charset = ""
                    Response.WriteFile(Fname)
                    Response.Flush()
         Response.Close()
         System.IO.File.Delete(Fname)
    End Sub
    So here are my questions?
    1. Is it possible to add a custom print control/icon to the CR viewer toolbar?
    2. If one is not possible, then is it possible to override the CR viewer print and export buttons with your own subroutines like the one above?
    I just want my page to look nice and hate to have print and export buttons outside of my CR viewer. 
    Thanks,
    Kevin

    It might be possible to replace the buttons in a windows app since you can retrieve the toolbar as a toolbar object in the winform viewer  ( ToolStrip toolBar = (ToolStrip) crystalReportViewer1.Controls[3]; )  however with a web app, it's a lot more difficult.
    The problem is that that you need to parse the Request string to try and figure out if the print / export button was clicked.  The code below makes the print button disappear if you click it, so you should be able to modify it to call your custom printing / exporting code instead  (You have to do this check in a postback)
            Dim I As Integer = 0
            If Request.Form.AllKeys.Length > 0 Then
                For I = 0 To Request.Form.AllKeys.Length - 1
                    Response.Write(Request.Form.Keys(I).ToString & "<BR>")
                    If Request.Form.Keys(I).ToString = "CrystalReportViewer2:_ctl2:_ctl2.x" Then
                        CrystalReportViewer2.HasPrintButton = False
                    End If
                Next
           End If
    Shawn

  • Can you play music to wireless and wired speakers at the same time?

    If you have Airport express, can you play music on speakers plugged into the airport express at the same time as you play from speakers attached to your computer?
    Thanks

    Yes you can. In the bottom right hand corner of the iTunes main window there is a drop down menu. Select the AirPort Express base station(s) you'd like to send your music to and also select 'Computer'. Not only will it play through all, it will play IN SYNC!
    I can't remember with which version of iTunes this was introduced, best to grab the latest version to be sure.

  • Can you set up a wireless network/router using only the iPad?

    Can you set up a wireless network/modem/router using only an iPad - if you don't have a computer?

    You actually can as most routers come with a web interface that lets you tinker with all things with regard to set up and connection.
    You have to choose though as there are other routers that would require you to plug-it in to a computer first, as they have a desktop application to make way for easier set-up.
    But for everything else, it is done through a web client which is just like accessing any web site.

  • We have a IPad setup with my ID, now we have I phones what if I use the same IDs? Or can I create a new one and use both on the iPad?

    We have a I pad setup with my Apple ID, we have just got I phones today, can I create a different ID for my my wives phone and can she then sign into the IPad?

    Stuartied wrote:
    How do I sign out of the I Pad for for my wife to sign in?
    Mac App Store: Sign in and out
    http://support.apple.com/kb/PH11499?viewlocale=en_US
     Cheers, Tom

  • How do you switch between 64 bit and 32 bit? (Win 7)

    I have searched here, Adobe Support, read the User Manual, and can not find any information on how one changes from 64 bit to 32 bit.  I am trying to create Time Lapse sequences and CS 5 tells me I have to be in 32 bit mode.  How do I get there? I am running an HP Pavilion dv7t-3300 i7 QuadCore with 4gb RAM and Windows 7 Pro 64 bit.

    Similar concern here. No 64 bit version. I purchased the Photoshop CS5 downloadable upgrade. I  have installed the program but only see the 32 bit version. Image  / Mode shows 8, 16 and 32 bit versions and no 64 bit.
    Start Programs offers only a single version of Photoshop which based on the splash screen is 32 bits. Did I miss something during the install?
    Bob

  • Can you work between mac based and pc based files using Photoshop, Illustrator, Indesign, etc. without any font issues?

    I work for a print company and we are wondering if Creative Cloud eliminates the font issues from designing a project on a pc and then making changes on a mac later without font issues.

    I should clarify a bit...If a customer sends us an InDesign file that they created on a pc and I open it on my mac, will I be able to load the pc fonts without any issues? I realize that if they are open type fonts I would be ok but how about any other fonts?

  • Can you download adobe photoshop CS6 and use it on a Ipad?

    I want to know if I can download Adobe Photoshop CS6 and use the program to edit photographs on my ipad?

    Only free or purchased apps from the iTunes store can be used on Apple's iDevices. Will iPhoto do what you want? There are other photo editing apps in the iTunes store.
     Cheers, Tom
    Look at these apps.
    Updated AppList: Photo Editing Apps For iPad
    http://appadvice.com/appnn/2012/03/updated-applist-photo-editing-apps-for-ipad
    12 Stunning iPad Photo Apps
    http://www.pdnonline.com/gear/12-Stunning-iPad-Pho-6559.shtml
    Message was edited by: Texas Mac Man

Maybe you are looking for

  • Null key in fact tables

    Hi all, I have one role play dimension with some null key in fact table, I liked know if it's a good practice? thanks

  • Running Apps from an External Hard Drive.

    Is it possible to download a massive app from the app store like Bioshock Infinate (30 Gigabytes), copy it from your applications folder in finder to the hard drive, and then run it from the hard drive?

  • Key Commands - Assignment not working?

    I'm trying to add key commands to have everything 'at hand' but they get listed and don't work. Example: I open key commands, search for 'automation', select "View Track Automation" and assign it 'Control + T'. It's in there, it is also in the arrang

  • Report integration to forms in 10g IDS

    Hi My package was created using D2K 6.0 version. I donot have access to 6i. Converted the same in 9i first. The proceeded to 10g. While converting forms there were no problems. But reports is a different story. If i compile and run the rdf file in re

  • Calculator and Scientific Notation

    My Calculator App seems to randomly switch back to scientific notation instead of displaying results in regular x.xx format. I tried deleting the com.apple.calculator.plist file and then relaunching Calculator but that didn't work. Any other suggesti