Can you talk and surf the internet with the Thunderbolt at the same time?

and what would be my advantages to waiting for the droid bionic
( I have never owned a smartphone)

rab6793 wrote:
Am a little curious. Is that with the WI-FI on or off?
The reason i ask, is that CDMA technology does NOT allow you to talk and surf at the same time. So am somewhat curious.
It's not necessarily a limitation of CDMA, just the technology Verizon was using previously. Network modifications and the Qualcomm chipset in the Thunderbolt make it the only current device that can do simultaneous voice & data over 3G in addition to Wifi and LTE.

Similar Messages

HT201274 can you talk me through the steps to restore my ipad?

can you talk me through the steps to restore my ipad?

There are instructions on this page : http://support.apple.com/kb/HT4079
If you've backed up via your computer's iTunes then :
To restore information from a backup, use one of the following methods after connecting your iOS device to the computer with which you normally sync:
Right-click (or Control-click) the device and choose Restore from Backup

Can you send and receive Fax`s with Firefox?

Can you send and receive Fax`s with Firefox? If so how do you do it?

Hi invariance,
Your printer supports eFax only, not analog faxing. To eFax, you will need to go through the registration process from the front panel of the printer. This will give you 20 faxes per month for free. If additional faxing is needed, you will need to cantact eFax and set up an account. There will be a fee for additional faxing capabilities.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?
I use the Open Explorer Windows to drag and drop the files, but the metadata are not copied. Thanks.

To maintain the metadata you'll need to use one of the third party tools that does this kind of migration. Metalogix has a product with a free trial that we have used before. (Don't remember whether the free version maintains metadata or not).
You can read about it here:
http://www.metalogix.com/Products/Content-Matrix.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

Can I repeat and record the same music tracks in Itunes

How can I repeat and record the same music tracks in Itunes

I would advise against this.
You can redownload some itunes purchases from itunes, but there is no guarantee that it will be there in the future.

Iphone 6 airdrop problem can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

Iphone 6 airdrop probleme can't find or connect to my iPhone 5s to share pic, how i can fix this ? at the same time my iPhone 5s no problem with airdrop to share.

hi raz, i don't have problem how to use airdrop , but the iPhone 6 can not find other contact so i can share pic , and i have iOS 8.0.2 on both iphone.and i have the same network .
with iPhone 5s i can share with airdrop and he find my iPhone 6 name so i share and accept pic, but from iPhone 6 i can't do the same.

Microphone and what U hear can not be use at the same time at the same time

I am using Creative SB X-fi Xtreme Gamer (Creative Model Number: SB073A), sound card and have down loaded the latest drivers (version 2.18.15). What U hear is enabled, which in turned makes the microphone unavailable. If you reverse the settings, then what U hear is unavailable.
It appears that; microphone and "What U Hear" can't be enabled at the same time. If someone has an answer on how to correct the following settings to achieve; using the microphone and what U hear at the same time would be appreciated.
My OS is WIN 7x32

It was possible in Windows XP but due to windows 7 own audio mixer this does not work anymore.

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible? Thanks

Yes. Yes. Yes.
Mylenium

Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi

Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi. I have already restored.

This entire thing is a hair over four months old, I don't think it should be acting up this much. Plus, this problem happens only once out of every 40 or 50 times I start this thing up. It's very infrequent, but it's there, and it just bothers me, I guess.
That said, I would try reinstalling, but I wouldn't be able to tell if it'd worked unless the problem never cropped up again in a long, long time. Sadly I also don't have access to my OSX discs at the moment (I'm out of the country).

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

Go to the Info inspector for the still image and in settings select the alpha type.

How to collect form responses in adobe formscentral and at the same time receive form responses through email

My client wants to have the form that I created in FormsCentral to be able to collect email responses. So to do this, I downloaded the form as PDF then imported it into Acrobat. I created a button in Acrobat (this will be for the email response part). I used this script for that function:
// This is the form return email. It's hardcoded
// so that the form is always returned to the same address.
// Change address on your form to match the code below
var cToAddr = "[email protected]"
// First, get the client CC email address
var cCCAddr = this.getField("ClientEmail").value;
// Now get the beneficiary email only if it is filled out
var cBenAddr = this.getField("BennyEmail").value;
if(cBenAddr != "")
cCCAddr += ";" + cBenAddr;
// Set the subject and body text for the email message
var cSubLine = "Form X-1 returned from client"
var cBody = "Thank you for submitting your form.\n" + "Save the filled form attachment for your own records"
// Send the entire PDF as a file attachment on an email
this.mailDoc({bUI: true, cTo: cToAddr, cCc: cCCAddr, cSubject: cSubLine, cMsg: cBody});
I got it from here: http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address
I'm still kinda not sure how it works but I'm getting the idea. Now what I'm having trouble with is, how do I make it so that the user will be required to click on the scripted button and at the same time, also click on the FormsCentral's generated submit button? Because as I see it, the user can click on the scripted button but they can just close out the form without submitting it to FormsCentral.
Is there any way to make my idea work?
Any help is very much appreciated!
Thanks!

I do not know or have time right now to look up NDP format.
To write to NTFS from Mac, you need a driver.
And to write to HFS from Windows also.
I strongly recommend Paragon drivers for both.
That way you can access anything from any platform.
Paragon Software for Mac

Create SP that returns value and at the same time displays query result in output window

I would like create an SP which will return the records from the table and also return value to my c# client application.
For Example:
Select * from employee returns all the query results in output window.
Now I want to create an SP
Create procedure Test
As
Declare @ret int,
Select * from employee
set @ret = Select count(*) from employee
if @ret > 0
return 1
else
return 0
The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
Can u pls help in this regard.

The above algo should return 1 0r 0 to c# client application and at the same time display all employees in sql query output window.
Why? and No!
Why? Your procedure generates a resultset of some number of rows. You check the resultset for the presence of rows to determine if "anything is there". You don't need a separate value to tell you this. Note that it helps
to post tsql that is syntactically correct. While we're at it, if you just need to know that rows exist there is no need to count them since that does more work than required. Simply test for existence using the appropriately-named function
"exists". E.g., if exists (select * from dbo.employee).
No! A stored procedure does not display anything anywhere. The application which executes the procedures is responsible for the consumption of the resultset; it chooses what to do and what to display.
Lastly, do not get into the lazy habit of using the asterisk in your tsql code. That is not best practice. Along with that, you should also get into the following best practice habits:
schema-qualify your objects (i.e., dbo.employee)
terminate every statement - it will eventually be required.

I can't shift + scroll at the same time! HELP!

I have a windows 8 , dell laptop. I have a Microsoft wireless 3500 mouse. I can't Shift+scroll at the same time and it's annoying when I play games that I have to shift+scroll which is basically the game I play all the time. Please help!

It's not, it's a downloadable game. Also it doesn't work with pages that you scroll down on like youtube, etc when I hold shift.

Can you talk and surf the internet with the Thunderbolt at the same time?

Similar Messages

Maybe you are looking for