Can you transfer an album you have on macbook pro to ipad wirelessly?

Hi everyone, as the question says can you transfer an album or selected photos from macbook pro to ipad and visa versa, wirelessly?
If so how do you do it?
Thanks.

Hi,
Yes, you can. Make sure they are both set to the same wireless network, choose the option to sync over wifi, and then choose the photo album in itunes that you would like to sync, then click sync
Joe

Similar Messages

Can you use a Macbook Pro power connector on a Mac Air?

Can you use a Macbook Pro power supply on a Mac Air?

Here's where Apple says it's ok too.
http://support.apple.com/kb/HT2346

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

Depends on what you had
If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
If you had any version of iPhoto '11 then you can install for free from the App store
If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
LN

Why can't I zoom in on text with my track-pad like I can with other browsers? I have a MacBook Pro. I used to be able to pinch and expand pages but now I can't.

Why can't I zoom in on text with my track-pad like I can with other browsers? I have a MacBook Pro. I used to be able to pinch and expand pages but now I can't. I have bad eye-sight and really enjoy and NEED this feature to be able to read most sites.

Hi dwightfontenot-
Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
Use the Filter bar at to top of the about:config page to locate a preference more easily.
Preferences that have been modified show as bold(user set).
Preferences can be reset to the default or changed via the right-click context menu.

How can I transfer my iPhone tunes into my MacBook Pro iTunes? Help!!! Gordon

How can I transfer my iPhone tunes into my MacBook Pro iTunes? Help!!! Gordon

You can't sync across accounts, so:
In Contacts select all the contacts (1 account at a time) and choose File>Export>vCard),
then on your wifes Air do the reverse, select File>Import.

I can't sync my all email message between macbook pro and iPad 4

Hi,
I can't sync my all email message between macbook pro and iPad 4. This sync only complete account setting but not email message.
Can anybody help me to fix the problem?

You can't "fix" this problem because you can't sync email messages from the Mac mail app, you can only sync your email account settings. Messages will not sync using iTunes.

I have a macbook pro. The wireless is always conected but it keeps stopping uring browsing for some minutes. However i am using teh same wireless on my iphone and it wok normaly without any stop or cut. Any help please?

I have a macbook pro. The wireless is always conected but it keeps stopping uring browsing for some minutes. However i am using teh same wireless on my iphone and it wok normaly without any stop or cut. Any help please?

I'm having the same issue. Different programs though, it's mostly browsers and adobe products. I thought maybe it was heat related but it's not. It seems that as soon as Lion was about to be released, the updates were updating in preparation for Lion. I delayed updating the software updates because Adobe (my career) isn't totally compatible with Lion yet. Before I even started getting update notifications, though, within the recent week, it's freezing up constantly. I don't know what to do. It seems to be happening with my brower choice, I'm using Firefox and Chrome as my main browsers. I keep alot of sessions open but that shouldn't cause (and has never caused) this constant freezing issue. I did install some extensions in Chrome and Firefox, maybe that's the problem... The issues began after those were installed though, 3 weeks to a month later... Maybe the software updates (that I installed thinking it would correct the freezing issue), maybe they are preventing other browsers ? Maybe Apple is getting rid of Chrome and Firefox ? I'm not having issues with Safari (yet) though I just opened it for the first time in 2 months... only because the macbook is freezing (and it's also rebooting while asleep, closing all of my projects and not saving them)...
My Macbook Pro is the same year and the HDD is a year new. The manufacture recall had the video whatever replaced a few months ago.
I've never had these kinds of problems with an Apple computer. I'm using Snow Leopard and I'm very attached to this laptop ! It's configured perfectly.
Why oh why does it freeze constantly within the recent 1-2 weeks ?
Someone please help us !

Can you have multiple users for your ipad

can you have multiple users on your iPad

We do. We each sign in our out with our own Apple ID's and we can share the same iPad that way.

Can you connect a MacBook Pro to two monitors?

I have a MacBook Pro mid 2010 and two monitors from two Mac G5's (late 2006). I would like to know if its possible to connect the town monitors to the computer and what hardware/ accessories would I need to do so?

I would use the DualHead2Go or the TripleHead2Go

I have a macbook pro and aphotosmartD110 wireless printer. I was told that if I install the printer software on my computer, it will no longer print wirelessly. Is that true and how do I scan wirelessly without loading in the software?

I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!

If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108

How many OS can you have in Mac Pro 1.1, have 3HDD so 3 OS?

Hi,
Currently have a Mac Pro 1.1, and want windows 64 bit as 32 bit isn't that good, keep running out of ram which slows the machine down! I currently have 2 HDD in this configuration:
Disk 1: 250GB, mac osx 10.7.5
Disk 2: 500GB windows 32 bit partition
500GB mac extra storage partition
I may get another HDD if I can install windows 7 64 bit on it, i just have a few questions.
I have a patched windows 7 64 bit to allow it to install via bootcamp, but had problems before so erased it and installed 32 bit, (had driver issues on 64 bit, and non mac gpu so couldn't see boot screen).
If I install it on a 3rd hard disk, will it show up when I hold down command when i boot up? I want to keep 32 bit in case something goes wrong.
Someone with experience would be awesome!
So I want to install windows 64 bit ultimate on a third hard drive without tampering with the others, i also want to know how to boot to it if it doesn't show up in the mac boot screen!
I have 10GB of ram and would like to fully utilise it, that along with 8 cores would make a powerful machine, which is limited in 32 bit!
Also, any additional guides to install it on a separate disk would be good!
Many thanks

In iTunes playlists and folders are two different things. I assume you are asking about playlists. 100 will not be a problem.
However, it is unnecessary to create a playlist for Now 82. If the tracks are properly tagged, it will show up as an album.

Can you have two apple tvs on one wireless network?

Can two or more Apple TVs exist on one wireless newtork?

No, in this case the 2 user accounts with its own Apple IDs would be completely seperated.
If you want to share this things like music and app purchases you will have to to something else.
1. Create two user accounts on your Mac (user A and user B).
2. Create two iCloud accounts just for Mail, Contacts, Calendars, Photos, etc. (one for user A and one for user B):
On your Mac (with Mac OS X Lion or Mountan Lion):
Settings > Mail, Contacts, Calendars > iCloud > Create an Apple ID (button in left corner)
On your iPhone, iPad or iPod touch (iOS 5 or later):
Settings > Mail, Contacts, Calendars > Add Account > iCloud > Get a free @me.com address and create a new Apple ID
3. It is not recommended because you shouldn't share your Apple ID account information with other people but you could set up your old Apple ID as an account just for store purchases (Apps, Music, ...) so that everyone of you can manage the purchases in their own library (Access is limited to 10 devices). Therefore you have to setup this "old" ID in Settings of your iOS devices (Settings > iTunes & App Store) and in iTunes on your Mac.

I have a lap top - pc - 10 yrs old - screen went out - how can I transfer pictures word directly to my Macbook pro retinal display 2013

screen went out on my 10 yr old dell xps m1710 - it appears to still boot - I can't see anything on the screen - I am looking ofr a way to directly access the hard drive pc to pc connection and do direct file transfers - tornado does not work c osx systems yet any otehr device out there? I have a lot of famiily pictures and some word files I want to transfer - nothing heavy. it is a screen/hardware issue not someting I can boot c in safe mode - still can''t see the screen and can't see to use a zip drive - I will need to use my new macbook pro 15 retinal display 2013 screen to "see" the files on the pc.
ideas?
Thanks
mhdmd53 -
usb to usb does not work nor does the tornado device - that is - so far - just pc to pc.

FireWire between the two (get appropriate 800-800 or 400-800), Target Disk Mode on the old one, appears as an external disk on the new one. Drag everything over, or use Setup Assistant if first start of new one, or plain old Migration Assistant. You really don't need a display to see a prancing FireWire icon, do you?
http://support.apple.com/kb/HT1661
http://support.apple.com/kb/HT4889
(with the added advantage that since you ain't booting anything off the drive, can turn the Mac on or off at will without risking data corruption on the drive)

Can you use a MacBook Pro without the keyboard attached?

Hi,
I plan to upgrade the hard drive in my MacBook Pro (MBP) to a solid state drive (SSD). I also plan to remove the SuperDrive in the optical bay.
I have to install a new firmware on the SSD. Installing the firmware requires the SuperDrive.
I intend to remove the SuperDrive after installing the firmware. I'm using a Early 2008 MBP (Pre-Unibody). This MBP is a difficult to dismantle and assemble.
Can I run the MBP (to install the firmware in FreeDOS) without reattaching the top panel (which houses the keyboard). Or can I just lay the top panel on the MBP without screwing it down. Will either of these actions damage my MBP? Once I've installed the firmware on the MBP, I'll reattach the keyboard.
I don't want to dismantle the MBP (to insert the SSD), assemble the MBP (to install the firmware with the CD in the SuperDrive) then disassemble the MBP again (to remove the SuperDrive).
I'd rather dismantle and assemble the MBP once.
Lifting the top panel (which houses the keyboard)
[IMG]http://s1.guide-images.ifixit.com/igi/AWVpQDJmt36GHxMS.large[/IMG]
[IMG]http://s1.guide-images.ifixit.com/igi/CRBYPZtYRqpWYY4O.large[/IMG]
Please let me know.
Thanks!

Sorry, Just noticed you were not using the Unibody models.
I am unaware if the power button is dedicated. Seems like you're on the right track with iFixIt. I figure as long as USB is available, it should be okay.

Can you plug your macbook pro to your monitor ?

as topic
thanks for answering
cheers
Ronald

Yep, you sure can. I have my MBP connected to a Samsung 730B via the digital input. This way I can use the dual screen feature to give me more desktop "elbow" room when I am working at home. Alternately, you can simply use the screen mirror option where what is on you MBP screen is also on your external monitor. If you have not purchased the external monitor yet, I would advise you get one with a digital input already built in.

Can you transfer an album you have on macbook pro to ipad wirelessly?

Similar Messages

Maybe you are looking for