Can you use a AIR-PWRINJ-FIB with a AIR-CAP3502I-A-K9 access point?

Is it possible to use a AIR-PWRINJ-FIB with an AIR-CAP3502I-A-K9 access point?

You cannot use a mouse as it defeats the point of a MacBook. You can although have a keyboard for the iPad which allows word processing and simple things like typing emails. Hope this helps

Similar Messages

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

    http://www.fileinfo.com/extension/acc

  • Can you use a iPod nano 4G With iTunes 10

    I was wondering can you use a iPod nano 4G with the new  iTunes 10

    Yes.  All previous generations of your iPods should still work with the latest version of iTunes.
    B-rock

  • Can you use iPhone ear buds microphone with your MacBook Air?

    If you use your ear buds to listen to your Facetime conversations, are also using the microphone on them to talk?

    Yes you can. Any headset compatible with the iPhone works just fine for full duplex conversation on a MacBook Air of current design. The microphone and earphones are simultaneously active.

  • How many monitors can you use on a new imac with GEForce 780m?

    My husband bought a new 27" iMac with the optional GEForce 780m with 4 gig of video ram. He wants to know how many monitors he can run simultaneously, and at what resolutions. He would obviously be using the Thunderbolt ports to do this. I thought this information should be easily found in the technical specs for either the iMac or the video card itself on the NVidia site, but it is not.

    Catherine Gramze wrote:
    Ok, rkaufman. Can he use two 4k monitors in addition to his iMac display? He wants to know what his options are in terms of number of monitors and the resolution. Yes, I know which monitor you buy will be the limiting factor for the actual display, but he has not yet purchased these additional monitors. If thunderbolt allows him to run 3840x2160, how many of them can he run at once at 32 bpp? How many if he chooses 2560x1600 instead?
    To be honest I don't know how many Thunderbolt displays he can run, I would STRONGLY recommend contacting Apple to ask. You can ask the online store (phone number is in upper right of it's home page) or if you have an Apple Store in your area, making an appointment with a business specialist and asking that question.

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

  • Can you use Multi Factor Authentication server with Central NPS and RD Gateway?

    Hi,
    Does anyone have any experience getting the Azure Multi-Factor Authentication (MFA) on-premise server, working with a Remote Desktop Gateway server, and a centralised NPS server?  I can get a solution whereby a user can get the second token (phone call/sms
    etc.) but the connection never gets established.  It looks like its looping as it repeats the phone call/text for a second time but again no connection.  I can’t figure out why.
    All the blogs are very vague as to whether you can combine a new MFA NPS connection policy with an existing username/group membership NPS policy on a centralised NPS server (with RAP/CAP policies).
    I need to understand whether we can combine both an MFA Radius policy with a Username/Password plus group membership NPS policy together to achieve two factor authentication.
    Do you have the Remote Desktop Gateway Server connect to the Central NPS server and then the NPS server use the MFA server as its proxy server? In effect turning the NPS server into a proxy Radius server?  
    Or do you configure the Remote Desktop Gateway server to use the MFA server as the proxy Radius server, and configure the MFA server to send on Radius requests to the central NPS server?
    Or either of these scenarios not supported and you can only use the MFA server as the only Radius server in the auth. process? (bypassing NPS policies?)
    Thanks if someone can assist,
    I’ve been using these blogs but to no successful effect:
    http://technet.microsoft.com/en-us/library/dn394287.aspx
    http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
    http://dave.harris.uno/installing-and-configuring-azure-multi-factor-authentication-mfa/

    Hi Michael,
    Thank you for posting in Windows Server Forum.
    After going through your description, I can say that we can use MFA server with central NPS and RD Gateway. Also the link which you have provided points the step to apply. In addition you can refer below article.
    Configure Remote Desktop Gateway to use Multi-Factor AuthenticationConfigure Remote Desktop Gateway to use Multi-Factor Authentication 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Can you use a Apple USB Superdrive with Windows

    Hello,
    I frequently finding myself wanting to use my Apple USB Superdrive with my work computer but havent had any luck being able to load CDs to play or burn.
    If anybody has a solution or information please advise.
    Windows XP Pro, Version 2002, Service Pack 3
    Thanks,
    Will

    It should work, as long as the drive is getting sufficient power.  It is possible that your Windows PC is not providing enough power through the USB port.

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Can you use the same Apple ID with multiple iMac's?

    I am a teacher and I have multiple iMac's in my room and I need to be able to purchase apps one time and have them on all my computers.  Is this possible?  I know that I can do it with multiple iPad's but can I do with iMac's?

    Yes logon to each computers itunes and away you go.
    To redownload on each itunes got to the itunes store, select Purhased from the quick links section and navigate to what you want to redownload.
    If you want to do it for apps that run on the Macs not on the iPad you need to login to the Mac AppStore and login with the same apple id and download apps that work on macs

  • How can you use an I-pod nano with family sharing?

    My daughter (under 13) has an IPod Nano, fairly recent generation. She doesn't really want a Touch because she like the radio feature when on the go with her Nano (long commute on public transit to and from school) but also wants fresh music of her own for when the radio is all talking. Family Sharing sounds perfect. Can she access this? Or should I set up an account and she uses ITunes on her computer to Family Share and then download the songs onto her IPod Nano from there? Or can I just not use Family Sharing unless I buy her a Touch and she loses access to the radio? Thanks!

    An iPod nano can't connect to the Internet on its own; all the music on it needs to have been transferred from a computer.
    (115689)

  • Mirro Raid can you use a single 4TB disk with 2 partitions for mirrored raid ?

    Hello,
    I have a new 4TB hardrive.
    After lots of reading, i was thinking that i could partician the drive to 2 (2TB) Then create mirror raid.
    Essentially thinking that i would have photos on one of the (2TB particions) and they would mirror on the other  ?? as a double copy storage.
    I can partician okay and the try to drag the two particians onto the "mirror raid set" and ithe following message displays :
    "Can't add Seagate expansion disk" to the raid set because another volume from this disk is already part of the RAID set"
    I'm now thinking i need to purchase another 4tb hardrive for this to work ?
    Or if you "mirror raid set" is it actually particioning the drive and creating a copy ?
    Forgive me... i'm not really very up skilled with disk utility, and basically just don't understand.
    Looking forward to some help and advise
    warm regards Tracy Gr

    It doesn't make any sense to mirror on the same drive. The idea behind mirroring is that should one disk in the raid set fail your data is safe on the other disk. Mirroring to partitions, if it's even possible, would only bring you disaster when the drive fails because you would lose the complete raid set and all of your data. If you insist on mirroring buy another drive.

  • Can you use more than one ipod with just one itunes?

    Just wondering if it's ok to use 2 ipods from the same itunes?
    Me and the wife have been sharing an ipod, but we've got one each now, so can we both just use the same itunes?

    You bet---just be sure that each iPod has a unique name. typically they have Your Name's iPod, but you can have any name you like, just type it in when you connect it.
    If you want to have different music on each iPod, then make a playlist of your own music and then open the Music tab when you connect your iPod and select the "synchronize playlist" (or something like that) instead of synchronizing the entire library. You'll see what I mean when you open the tab, it's pretty self-explanatory.
    I have four iPods of various generations that I keep synched on the same computer.
    :))

  • Can you use Apple TV 3rd generation with a hdmi-component video converter

    Does Apple TV 3G support any hdmi to component video adapters for use with older plasma tv's without hdmi inputs?

    HDMI is the only supported method. There will be no guarantee with any converter. If it does work you will be unable to play protected content (ie iTunes, Netflix)

Maybe you are looking for

  • Function module for calculation of Income Tax

    Hi Friends, Please guide me any function module which calculates income tax. I have total income with me. I want to know the :--                             -->tax on total income,                             -->education cess 3%,                    

  • HELP! Photoshop CS5 Extended 64bit on Win7 64

    First, I posted a problem here: http://forums.adobe.com/thread/767488?tstart=0 ...DO NOT close out the thread before I have a chance to respond and to see if you fix works.......... DUH. I updated and I still have the same problem. I even unstalled a

  • Big white box with color changing circle blocking google address bar!

    There is a big white box with a colored circle in center that's blocking the google address bar.  Cant get it off!

  • Date conversion problem.

    I use 2 adaptive RFC function with a r3 backend system: 1- Search 2- Update The first works fine, I show the data, one of the fields is a date (with r3 Date format) binded and in the web dynpro is showed in inputfield, with a little calendar icon on

  • Path to dir

    Hi, I wonder how I can get the path to the directory where the jsp files are from a javabean. I don't want to get it from a jsp page and then send it to the javabean.