Can you use a Airport Express N to extend a network with a Comcast Modem/router to get ethernet to a stereo receiver?

Trying to hook up a friends receiver using a AE to get it ethernet. I know how to do it with an Airport Extreme (my own system) but can I do it with his hardware?

You cannot use an extreme to a brand other than Apple for wireless bridge.
You can use an Express. You need to join a wireless network which is a rather tricky setup.
https://discussions.apple.com/thread/5719954?tstart=0
Or look at a post by Bob TImmons on how to set up express in bridge.

Similar Messages

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • Can you use 2 airport expresses at the same time?

    I want to play my iTunes through my computer speakers and up to 2 airport expresses at the same time, to fill my house with music without having to blast it in any one room, but iTunes will only play on the computer's speakers or through the airport express, but not both.
    Is there a hack to get it to play on multiple airports, like giving both airports the same identity or something?
    I could acheive this with extra speakers and lots of wires running all over the house, but I'd like to avoid that.

    From the Airport Express FAQ
    http://docs.info.apple.com/article.html?artnum=108038#9
    Question: Can iTunes send a single AirTunes stream to multiple AirPort Express stations?
    Answer: Yes. With iTunes 6.0.2 or later, you can send an AirTunes stream to multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware 6.3. The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.

  • Can you use another airport express to boost

    I already own one airport express as my primary wi-fi, can I use a second one to boost the signal across the house?

    Your friend has two AirPort Express devices, but the second that he bought is not configured to "extend a wireless network", despite what he might believe.
    As I previously mentioned, the "extend" setting can only be used when the Express devices are 802.11"n" models. Your version of the Express is an older 802.11"b/g" model.
    This Apple Support document will confirm that you must use 802.11"n" versions to "extend". Notice that the title of document reads Setting Up and Configuring an Extended Network 802.11n:
    http://support.apple.com/kb/HT4259
    Your friend's Express has likely "joined" the wireless network....a setting which can be used for AirTunes or attaching a remote printer....but his second Express is not providing any additional wireless signal for his network.
    You need to purchase two new AirPort Express devices if you want to "extend" your network.

  • How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

    I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
    I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
    This via an ethernet cable that is plugged  into the airport express and then into the ethernet port on the g5.
    Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
    I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
    Please assist. Thanks.

    Two requirements that must be met to do what you want.......
    1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
    2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked. 
    Open AirPort Utility and click Manual Setup
    Click the Wireless tab below the row of icons
    The box to "Allow Ethernet Clients" must be checked
    Please check to verify that your AirPort Express meets both requirements

  • Can I use my AirPort express to create a wireless network in my uni room?

    So, I'm going to university in september and my room has an ethernet port to connect to the internet. If I buy an AirPort express, can I plug it into the ethernet port to create a wirelss network in my room?

    The quick answer is yes.  However, You should check with the appropriate University authorities to make sure they will allow it (some do not)  If they agree, they may offer you a tutorial as to what you need to do to enable it.
    Many business people utilize the Airport Express to provide the convenience of Wi fi in their hotel rooms, if the hotel doesn't supply an in house Wi Fi system.

  • Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access?  Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

    Thanks for the help.  Looked but not clear on what I am trying to do as being possible.  Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it? 
    I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located.  Would prefer to replace Linksys with all Apple, but just not possible financially yet.  Thanks for the help.

    If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

  • Can i use the airport express in my hotel with wired connection?

    I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room.  Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S?  I'm new to Apple products so will certainly appreciate any info that may help.  Thank you!

    You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
    App Store - AirPort Utility
    Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
    Power up the AirPort Express and wait 40-45 seconds
    Tap Settings, then tap Wi-Fi on the iPad
    Tap the AirPort Express under the heading of Set up an AirPort Base Station
    AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
    Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

  • Can I use the Airport Express as a cable modem?

    I am trying to set up wireless internet in my home, and I am planning to purchase an Airport Express. Can I use the Airport Express as a cable modem, or do I have to purchase a modem from the ISP and then connect the AE to the output of the cable modem?
    Thanks,
    Adrian

    No, the AirPort base stations do not perform the functions of a DSL or cable modem, so you will still need to acquire one.

  • Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

    Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • Can i use an airport express as an ethernet print server?

    here's my situation: i have a belkin wireless g router connected to my cable modem and my G4 desktop connected to the belkin router. i need to access an epson 3000 printer with only an ethernet port in another room in the house. i was told my the tech guy in the local apple store that i could use an airport express to do this but for the life of me i can't make it happen using either airport setup assistant or airport admin utility. so is it possible? and if not, what would you suggest i do so i can access the printer?
    thanks.

    Can I use an Airport Express as a wired client to an Airport Extreme?
    Sure, follow the instructions in this Apple Support document and simply substitute the AirPort Express where you see a second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • Can I use an Airport Express to extend a network using a Bwrg500 router?

    Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router? The Bountiful wireless router has the WDS abilities.
    http://www.bountifulwifi.com/Products/BountifulRouter500G/Overview.aspx
    Thank you for looking.

    It is in fact possible to extend your network using WDS. I say this under the assumption that your statement regarding the WDS capabilities of the Bwrg router is correct. However, keep in mind that you cannot use a WPA or WPA2 password with a WDS extended network. You must either use no encryption or use WEP. Unfortunately some routers require WEP passwords that use either 10 or 26 digits ONLY while the express uses a 13 digit password.
    This can be a troubling problem considering that most people need a wifi password to ensure safe and secure browsing.

  • Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

    Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network?  I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
    Thx! ACB

    Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
    It would be extremely unlikely that the Express could do what you want, but some things are never known until  you try.

  • My wifi is not too strong in one room, can I use an Airport Express to boost the signal?

    I have an Airport Base Station but the signal is only one or two bars at one end of my house. Can I use an Airport Express to boost the signal?
    Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?

    Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?
    You might want to look over this article:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Can i use my Airport Express (2nd generation) instead of a Sonos Connect

    I have an Airport Epress (2nd generation) and want to use it instead of buying another Sonos Connect At the moment my Sonos Connect is hooked up to my Bose Solo as part of my Sonos audio system around the house. i want to move the Solo to the dining room but keep the Connect in the living room hooked up to my CD player. Instead of buying another Connect for the Bose can i use the Airport Express that i have spare and config it to use like the Connect.
    Can anyone help??
    Barry

    Yes, and no. You can connect the Bose speaker to the AirPort Express, and then, stream iTunes via AirPlay to the Express.
    I believe Sonos uses a different audio streaming protocol than AirPlay. You cannot directly stream from a Sonos server to the Express. For that you will need one of the Sonos solutions.

Maybe you are looking for

  • How can I open excel pdf files

    How can I open excel pdf files

  • Send printer friendly page per mail

    Hello everybody. I'm very new with APEX and I couldn't find an answer to solve my problem: I have a printer friendly page with several text elements and a report so that it nearly looks like a letter in the end. Now I want to send this page as a "pdf

  • Checks Boxes in a Grid

    Hi Experts, I am binding my data to a grid and after that i have added a check box column as last column and i kept the Grid Collapse level as  2.My data is binded as following COL1                COL2           COL3                     COL4   A     

  • Is it a problem if the fans are in "airplane mode" for a long time?

    OK, have another quick question about my G5 Quad: Occasionally (like 2 or 3 times a year), my Quad fans will go into "airplane mode" - I don't know if it's from a failed boot or what (though a hard restart clears the problem), but my question is rega

  • My AfterEffects presets have a lock on them. How do I unlock them?

    my AfterEffects presets have a lock on them. How do I unlock them? Both when I go thru bridge or thru the effects panel