Can you use a start up disc on an iMac without formatting the hard drive?

Can you use a start up disc on an iMac without formatting the hard drive?

Yes, because the startup disk is read from the boot rom, not the Hard Disk.

Similar Messages

  • I have 1TB hard drive i cant drag or sent to it although i can view it on my desk top do i need to format the hard drive ? please advise

    i have 1TB hard drive i cant drag or sent to it although i can view it on my desk top do i need to format the hard drive ? please advise

    If the format is NTFS, which it likely is, then follow Ralph's advice, but youmay also want to partition it with GUID partition table.
    In Disk Utility, select the drive, then Partiiton tab.
    Choose 1-partition from the popup menu.
    Click the Options button (it is only enabled if you change the partition layout, above).
    Select GUID partition table.
    Then, give the drive a Name and format of Mac OS Extended (Journaled).
    If you wish to use the drive with Windows, use MSDOS or exFAT. MSDOS will limit files sizes to 2GB. Some think exFAT is flakey.

  • How can you use symbols in Windows 7 on a IMac 27

    How can you use symbols @$€%£¥ in Windows 7 on a IMac 27 mid 2011?  I tried what was normally done on Windows and got nothing.  Alt plus numbers and nothing happens, what am I missing?

    Frosted Flake,
    Are you referring to an equivalent to the Windows Character Map Application (charmap.exe) that allowed you to see the various characters available in each font, and then give you an ALT-nnn number you could key to use the character you wanted ?
    If so you can use the Special Characters from the Edit menu of most applications. Once you have located the character/symbol you want double click it and it will be entered wherever you cursor is located in your application.
    Further information can be found here :
    http://support.apple.com/kb/PH3871
    Hope this helps
    Cheers
    AF

  • Can you use Time Capsule on a windows and 2 macs at the same time.

    Can you use Time Capsule on a windows and 2 macs at the same time as either a backup for one and a seperate HD drive for two?

    Yes.
    From one viewpoint the Time Capsule is just NAS (Networked Attached Storage) and it supports the file sharing protocols necessary for both Windows and Macs.
    From the viewpoint of the Macs it can also be used by Time Machine for backups.
    As NAS it can be used for storing files, and there are many backup software packages that support NAS on both Windows and Macs.
    In addition from a networking point of view it can serve as a router, wireless access point etc.

  • How can you download photo's and video's from an iPad to external hard drive

    How can you download photo's and video's from an iPad to external hard drive for storage.

    Here's the link that explains ...
    http://www.idownloadblog.com/2014/06/02/apple-updates-the-photos-app-in-ios-8-to -work-with-icloud-photo-library/

  • Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30.  I did a utility scan of the hard drive disk and it is fine.

    Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30.  I did a utility scan of the hard drive disk and it is fine. What do I do?

    Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.

  • Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

    Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

    Yes.  See:
    How to use multiple iPods, iPads, or iPhones with one computer

  • HT201318 can you use a itunes card to pay for more storage for the cloud

    I was wondering can you use an Itunes card to pay for more icloud space.

    No. iTunes Store only.
    "An iTunes Gift Card lets you shop for anything at the iTunes Store "  >  http://store.apple.com/us/browse/home/giftcards/itunes/gallery

  • HT1947 Can you use a mobile hotspot on your iPhone 4s to control the remote app?

    Can you use your Iphone 4s as a moblie hotspot to control Itunes via the remote app?

    The camera roll is not part of the sync process at all.
    You should be importing these photos to your computer regularly as you would with any digital camera.  Youc an organize them on your computer and sync the to the iphone if you wish.
    The photos sync from the computer to the iphone is one way.
    The iphone mirrors the selected content of the computer to which it is synced.

  • Can I install my time machine back up onto a properly formatted external hard drive?

    I have a MacBook Pro with a 750GB harddrive, with 500+ Gb of data on it.  Just before I traverse to Europe, I did a TimeMachine back up. 
    I now want to give my Mac to a friend, and buy a AirMac when I get home.  Even if I get the one with the largest drive it will not hold the full 500+'back up. 
    I have an 8 year old Mac Book pro at home as well.  It will be a few months before I can buy the new AirMac. So my question is ....
    Can I install my current backup on a properly formatted external hard drive, and will it then run like a computer --until I get my new AirMac?
    Thanks for your help (and please don't be too tough on me for what may see to de a dumb question)
    Soper777

    The Time Machine backup is not bootable
    You will have to install Leopard first

  • I am using Windows XP on my laptop. Had to format the C drive. I have reinstalled iTunes but I am unable to add anything other than music, TV shows and movies to the iTunes library. It is not showing any option to add podcasts, books, photos or apps.

    I had to format the C drive recently. I have reinstalled iTunes but I am unable to add anything other than music, TV shows and movies to the iTunes library. It is not showing any option to add podcasts, books, photos or apps. These things are available on my iPhone but are no longer there in the iTunes library. Please help.

    In iTunes go to general preferences and check the boxes for those you wish to see in the library.

  • Can I get a data recovery from Apple if my iMac was in the hard drive replacement programme and I wasn't notified about it?

    Basically my iMac just crashed and I searched on Google for replacing my hard drive and came across the iMac 1TB Seagate Hard Drive Replacement Program at http://www.apple.com/support/imac-harddrive/
    Which is that Apple is asking all 2009 - 2011 iMac users to return their iMac for a free hard drive replacement because it currently has a fault in it. After entering in my serial number, I see that my iMac is elegible for a replacement.
    I did register my iMac with Apple, but I didn't receive any email about this program and I lost all my recent data because of the faulty hard drive. I never had an issue before with the drive so this just happened out of the blue.
    Is it possible to get a free data recovery from Apple for this? I find that it was a lack of communication that I lost most of my data.

    I completely understand that it's my responsibility to back up my data but I have it set to every 2nd month, not on a weekly or daily basis to back up the data.
    Apple might not be in data recovery business but could they not acquire a third party to do this?
    This is what happened:
    It was on sleep overnight and when I tried waking it, it was lagging badly. So I shut it down and restarted it. I phoned into techincal support to find out whats wrong, but they were giving me advice to reset the params etc. But i think it made it worse because it didnt want to get passed the white start up screen.
    So I phoned back to ask if it's a usual issue with my version of iMac and the man replied that it isn't common and that I should run the disk utility to check the hard drives health.
    I installed Mountain Lion on a USB and started the disk utility. Then it highlighted in red that it's a hardware fault and cannot be repaired by the disk utility. Therefore the hard drive has a serious fault with it.
    That's when I Google'd for a replacement drive and came across the program. The techincal guy didn't even tell me about it or anything.
    If I knew about this sooner, I would have taken it in for a replacement.

  • Can you use SQL as a data source for a project in the same way you can in Excel?

    Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
    the data from the stored procedure as a series of tasks?
    Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
    it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

    No, You can not use sql as a data source for a project.
    You have 3 options to achieve it:
    1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
    2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
    3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
    create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
    kirtesh

  • Can you use Easynews to download movies etc to IMac and how and where do you save the files?

    Can you useEasynews to download movies etc to IMac and how and where do you save the files?

    From your Apple menu at the left end of the menubar, select "About this Mac." You get a window similar to this:
    1) The Mac OS version is just under the big "MAC OS X" line. Post what that says.
    2) We can start to figure out what iMac you have if you post what that the "Processor" line says.
    We need to find out because Apple's poor labling choices for this forum, intended for iMacs made before 2006, causes people with newer and much more capable Macs to post here by mistake.
    Without some info from you, it's much like your calling an auto mechanic and asking if you can use a certain part without telling him the make, model, or year of your car. Quess what his first question will be? Works the same here.

  • HT1751 Hello, can you help? I have backed up iTune library to an external hard drive, but want to set up periodic back ups every month. Do I have to follow the "Consolidate file" procedure every time I back up, and does my original back become over writte

    Hello can anyone help? I have sucessfully backed up  my iTuines library to an external hard drive, but when backing up in the furture (Monthly)  do I have to follow the same procedure again, and will this place an additonal copy of my iTunes library on my hard drive, so duplicating the back up and so rapidly fill my hard drive.
    Ideally what I would like, is for the lateset back up to over write the original so saving space on my external hard drive. Many thanks ......Steve

    The "consolidate" command has nothing to do with making backups. You use that command when you have had content in multiple places and you wish to have it now all in a single iTunes folder. If all of your content is already in the iTunes folder, then the "consolidate" command will be of no use to you. You will make further backups using whatever method you normally would use to make backups of your data in Windows.
    Regards.

Maybe you are looking for

  • Releasing a hold

    i'm trying to release a hold on internal sales order items that are backorders, but i'm getting an error saying " this is a system seeded hold cannot be released by user" please help

  • G/L account problems for vendor

    Hi Gurus, I came across an issue in my work where we have a vendor with 2 different vendor numbers used by two different business units. offlate we are seeing that some payments for that vendor were flowing into the other business unit's G/L account

  • Cannot type in Actions Frame

    I just created my first swf in Flash 8 Basic. Everything went great until I wanted to put a stop action at the end. Then I found that I couldn't type in the Actions Frame (displayed by pressing F9). I could enter the stop action by selecting it in th

  • Saving for Web

    I was wondering if there was a way to configure Photoshop so that when I create slices and "save to web" the HTML code that generates already includes my domain/directory instead of just starting at "images/x.jpg." This would save me loads of time si

  • Delete archivelogs on a manual standby with RMAN

    Hi, Using Oracle 10.2.0.3 Standard Edition, I created a manual physical standby database with a standby controlfile. FRA is configured on both servers. I want to use RMAN (recovery catalog in the controlfile) to delete archivelogs on the standby serv