Can you use after market charging accessories on the 5s? My 5s recognizes the item but will not charge. I've tried two after market power cords (they work) and 3 adapters I put on my old 4s power cord. Only the Apple cord works.
I've tried using my sister's after market power cord and it recognizes that an accessory has been plugged in but it won't charge. The cord does charge my sister's 5. I've also purchased 3 adapters and put them on my 4s power cords and the same thing happens. Only the power cord they came with the phone will charge it. Does anyone know if this is a new thing will all
5s iPhones or just mine?
Thanks!
New to iOS 7. Not just your iPhone 5S. There have been several
injuries and a few deaths due to 3rd party chargers - use the
supplied charger and cord.
Similar Messages
-
Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.
If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks
Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.
-
After a year of owning my iPod touch 4g it suddenly stopped charging on my computer and outlet addapter. It still shows the two pronged plug icon that recognizes the iPod is connected to something but even as the battery level goes below twenty percent it will not charge. Still functions well and even connects to iTunes.
If it is still under warrenty which you can find out from here or if you know it's under one year old bring it to the Apple Store.
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
TS3499 macbook recognises but will not charge new battery
I was advised to buy a new charger last week and have just been advised by an apple employee to buy a new battery for my MacBook 2009 and i am having the same issue as my old battery.
The Mac reconognises the battery but will not charge or run off the battery.
Just spent £150 in total on new charger and battery but still having the same problem as before.
I have downloaded the firmware update but my Mac is already running the latest software.
Regards
JackHave you reset the SMC and pram?
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables with a battery you don't remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Battery charges when asleep but will NOT charge while awake
Hello -
By battery will charge when off/asleep but will not charge while awake. It just slowly drains to nothing and dies even though adapter is plugged in. magsafe adapter light is green when open/on and orange when off/asleep and lights on battery indicate charging while in the latter state. still using stock battery that came with computer when I got it a few years ago, so it's not new by any means, but when fully charged lasts as long as it used to. I would think maybe charger is issue, but it DOES charge, just not while awake. not sure why computer wouldn't still work correctly while plugged in if in battery indicator it says power source is "power adapter," but its not. I have tried resetting PMU and calibrating battery. the combo of the two seemed to work when having issue a few months ago, but it just started doing it again. frustrating because once it dies I have to wait several hours until its fully charged again, so it cramps the workflow... any ideas? battery info from profiler below.
Cheers,
Ian
Battery Information:
Model Information:
Serial Number: DP-ASMB013-3556-2063
Manufacturer: DP
Device name: ASMB013
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0300
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 81
Fully charged: No
Charging: No
Full charge capacity (mAh): 4571
Health Information:
Cycle count: 827
Condition: Good
Battery Installed: Yes
Amperage (mA): -1134
Voltage (mV): 10921
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: NoScott - Your answer ultimately led me to the answer, albeit months later, after much internal deliberation and some trial and error... thanks!
Ruled out battery (as crazy as that sounds - it's had a bajillion cycles) as it didn't make sense that battery would charge but wouldn't work while awake. I have a friend whose battery is completely shot and his still works as long as magsafe is plugged in, and mine wouldn't even do that. tried another adapter and that worked. then tried mine in a different plug. so in the end, turns out I had a bum powerstrip... mag safe / battery recharge works properly when just plugged in somewhere different.
So no need to buy a new charger or battery (yet!)
thanks to all,
Ian -
My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge on any outlet. Also it will not start when it is unplugged when my battery is at 50%. It also will shut down immediately if I unplug it from the charger, even though it says it isnt being charged by it. Can anyone help with this problem?
So you have the 13" aluminum notebook that just says "MacBook" on the display, correct?
You can get a new battery for $100 from Other World Computing here.
Alternatively, you can get one through Apple for $130 here.
I personally would go through OWC - they're a highly-recommended third party for these kinds of parts and their batteries work just as well as Apple's.
~Lyssa -
my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??
See Here > Device Not Recognised http://support.apple.com/kb/TS1538
-
My ipod connects to the computer but will not charge, can you help?
My ipod will not charge. I have tried charging via the mains and via the computer. The computer recognises it but it still won't charge. Any ideas as to what the problem might be?
See the not-charging topic of:
iPod touch: Hardware troubleshooting
Another charging source?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
Time for an appointment at the Genius Bar of an Apple store. -
I have an older Ipod classic it plays on everything i have . Recently replaced the battery because it would not take charg .After new battery it plays through several defferent devices but it will not CHARG !!! HELP!!!!
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Iphone 4 will not charge after ipdate to IOS 7.0.4, Does anyone have a solution ? I have tried apple cables and chargers. I see many have the same issue. Anyone made progress ?
No offence, but as with quite a few others, my Iphone stopped charging on mains after iOS 7.0.4 update too.
Not sure you can categorically advise that "it simply is not a software issue" when so many different people are having the same symptoms after updating their iOS Just have a quick Google!
Luckily my (original Apple) cable will still allow recharging via USB to a laptop. So, process of elimination would point to a bricked charger that was working faultlessly up until the iOS 7.0.4 update was applied. Seems quite a stretch to be a coincidence.
Look forward to an explanation ..... and an update? ...... -
My iPhone 4 will not connect to my MacBookPro. It will not charge on my MacBookPro, but it will charge on a wall socket and it will play music in a 3rd party speaker system??
This is extremely frustrating not only can I not back up my iPhone but I also can not update its OS etc.Have you tried other USB Sockets on the MBP?
Have you tried other devices in these USB sockets?, do these work?
Sounds like a fault on the Macbook -
I touch will not charge or show up on the computer. It charges on the wall charger. I uninstalled and re-installed itunes and I also restarted the itouch and the computer. What next?
Play it safe with the charging. Use the wall charger for at least an hour and then connect to the computer. If iTunes still denies that it exists, go here:
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
my nano 6th gen shows in windows but does not show under devces. tried everything in the help program but still doesnt show under devices. can drag and drop music into nano from library to top right i pod symbol.
Hey steven-g1,
Thanks for the question. The following article addresses the exact symptoms you described, along with a few potential solutions:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thanks,
Matt M. -
TS2771 Ipod connects to tv, but will not charge or sync
My ipod was charging fine on my drive home. I connected it to my tv with the video cable and was watching netflix. Then I got a message that the battery was at less than 20%, even though the ipod had been connected to the wall charger the entire time I was watching.
I've tried every charger, every cable, every dock, and every computer I own now, and it will not charge with any of them. Neither my desktop or laptop will recognize that it is connected. The ipod never shows that it is connected or charging. I tried pushing the power & home buttons to reset it and still have the same problem. The reset made no difference. And I'm low on power so there's not much else I can do before it completely runs out of charge.
Any idea why it would give out on me so suddenly, or what I can do to fix it?
Model# PC547LL
iOS version 6.0.1- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I have had to restore my pc to a place back in time when it worked correctly. This meant that iTunes was deleted. I have now downloaded the latest version of iTunes but I cant sync my iPad with it. I get the message that this iPad is synced with anot
-
Reg: ABAP code for customer exit variable
Hi Team, I have a requirement to create a report based on an multiprovider 'TEST'. Based on the input selection of Period; I need to define a Keyfigure X which will be a count of value available for that Period in one cube involved in the MProvider.
-
Is there adobe flash foe the iPad
I need adobe flash on my IPad. As I am finding out it is not possible to install it. Is there something else I can download that will work the same?? Or is there a way to download it?
-
Mac Yosemite Photoshop install crash message 'application Core Sync has quit unexpectedly'
Just trying to install Photoshop / Lightroom trials. Creative Cloud manager has installed but can't download apps - get crash message 'application Core Sync has quit unexpectedly'. Installing on Mac with OS X Yosemite. Any suggestions please...
-
Hello Gurus, When I tried to process the three materials by calling the transaction VK12 in my program, there is an error message in the logs "Condition records for the selection entered are blocked by the USER". The condition records do not saved au