Can you use different audio devices for different apps?

I've paired my iMac with a set of Bose Companion 20's - they connect via the headphone socket. I regard these as my default audio device. However, when I work from home I need to use Lync 2011 for Mac and want to be able to use a bluetooth headset for lync enterprise voice calls (my employers chosen platform). Is it possible to use my bluetooth headset for incoming / outgoing calls when using Lync but the Bose speakers for say internet radio? If this is possible, any guidance as how to configure would be much appreciated. Thanks in advance....

After going to a particular folder and selecting a view, click the little Action Gear and select "Show View Options" and at the top check the box "Always open in xxx view" where xxx will be the view you presently have selected.
Do not check the bottom box to use this as a default or else all folders will then open this way.
Message was edited by: nerowolfe

Similar Messages

Can you use the same form for different datasheets?

Hello! Thanks in advance for your time.
To keep this short, I have created a form at my place of work to do a type of process audit. The form has worked extremely well and now other areas of the business would like to use it. For example, let's say I wanted to perform the exact same process audit
at a supplier, but I want a separate datasheet on my SharePoint page to separate in house audits from supplier audits. The form I created for in house audits took an extremely long time and has tons and tons of fields and tons and tons of rules.
Can I simply save the form to a new location, and somehow publish the form to a datasheet view so all fields from the form appear as columns and the form submits data to the new datasheet? If so, can somebody explain how? I would be eternally greatful!
Mitch

Would this be an InfoPath form?
One option would be to extend your current form to have a 'Type' field that has 'Internal' and 'Supplier' as choices. You could then create views to show 'All', 'Supplier only' and 'Internal only' subsets of the data.
Alternatively you may be able to save the list as a template and then re-use it but I can't remember how well if at all that works.

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
<b>Reward points if it helps you.</b>
Regds,
Rama.Pammi

Can you use the Vocal Transformer for Live Show?

Can you use the Vocal Transformer for Live Show? I have automations set up in my vocal track using the vocal transformer and would like my vocals to adjust accordingly while performing live. Is this possible to configure and if so, how do I set it up at the venue?

Vocal Transformer opens in MainStage. All controls in VT are visible & editable in MS. Don't set it up at the venue. Set it up in one or more patches before you leave your house. You will need up to twelve sliders or knobs plus one or two buttons on your controller to get the most out of it.

If you buy a itunes gift card, can you use it to make in game/app purchases?

if you buy a itunes gift card, can you use it to make in game/app purchases?

Thank you

HT1947 Can you use your iPad alone for sharing iTunes music to apple tv without having your pc on?

Can you use your iPad alone to share iTunes music to apple tv without having to use your pc?

Do you have any music stored on your iPad or is it all on your PC?
If the music is stored on your iPad, then double tap the home button, swipe (left to right motion) and you will see the volume/brightness controls/AirPlay. Tap on AirPlay and select ATV. Then go into the music app

How to set default audio device for java apps on Linux?

I would like to find a way to choose a particular (ALSA) audio device for java applications. How can this be done without reprogramming the application or changing the default ALSA device? I came across "sound.properties", but could not find any information how to use this file on an ALSA system.
Thanks for any help, Mark

Eugenia wrote:Well, it's still not good enough.
We can't satisfy everyone. What you want is a corner case. For most people ALSA and dmix works appropriately, and that is what esd uses by default. We cannot document and automate every configuration possible. That's up to the users.
However, if you don't want to restart gnome, try the below... I make a few assumptions, but even if they're wrong, they're hardly difficult to work around.
Just copy the /etc/esd.conf to ~/.esd.conf, make your change, then do killall esd. Presumably gnome will restart esd, and it ought to read your local config. If it doesnt, start it yourself.
Feel free to write a script that automates this, or document it on the wiki.
I have to restart Gnome to get this thing working. Other OSes *automatically* can use an alternative device. But if I change ESD, I will have to restart Gnome, no?
Well, if you try my suggestion above, no. You can restart esd yourself. And that's what all the other distros do, except with some fancy GUI.
James

Hi, with mix16 pro app, can anyone tell me when you set different audio levels for different tracks, does the app remember the level set the next time you use it? Or does it default to the original setting when you power down after a show? Thanks!

Hi
I use backing tracks for some songs with a live band and we are having some issues with levels. Some are higher than others etc. I use i pad to run the tracks. I am looking for an app that where I can control the levels better. Ideally, an app where I can set the level of each track to a desired level and leave it at that level for good. Mix16 Pro seems to do that but I wonder does it save the setting as I do not want to set the levels every time I use it.
Thanks

Hi
I use backing tracks for some songs with a live band and we are having some issues with levels. Some are higher than others etc. I use i pad to run the tracks. I am looking for an app that where I can control the levels better. Ideally, an app where I can set the level of each track to a desired level and leave it at that level for good. Mix16 Pro seems to do that but I wonder does it save the setting as I do not want to set the levels every time I use it.
Thanks

Can i use same address pool for different remote access VPN tunnel groups and policy

Hi all,
i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
thanks in advance
Shnail

Thanks Karsten..
but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below, this will achive waht i need right??
access-list 15 extended permit tcp any host 192.168.205.134 eq 80
username test password password test
username test attributes
vpn-group-policy TEST
vpn-filter value 15
group-policy TEST internal
group-policy TEST attributes
dns-server value 192.168.200.16
vpn-filter value 15
vpn-tunnel-protocol IPSec
address-pools value existing-pool
tunnel-group RAVPN type ipsec-ra
tunnel-group RAVPN general-attributes
address-pool existing-pool
default-group-policy TEST
tunnel-group Payroll ipsec-attributes
pre-shared-key xxx

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

How can I use the same session for different components acroos application ?

I am trying to include the components(chat, filesharing, whitboard) in different parts of my application. User should be able to access any of the component. We would like to have a single "ConnectSessionContainer" so that we don't see same user creating a seperate session for each component.
Is there a better way of dealing with this other than declaring the "ConnectSessionContainer" in the main application ? Is there a way to check if we have a "ConnectSessionContainer" session already established ? Please help . Thanks.

Thanks for the response. Let me explain what I am trying to do..
I am trying to create components at different places(screens) of the flex application (not in the same .mxml file).
Each time I create a component, I am using a "AdobeHSAuthenticator" and "ConnectSessionContainer" which is resulting a new participant in the room.
For example
screen1.mxml -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
        <rtc:Roster id="myRoster" width="100%" height="100%" />
        <rtc:Chat id="mychat" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
screen2.mxml (in the same application) -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
        <rtc:SharedWhiteBoard id="wb" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
Here, I open a screen1 and authenticate as UserA and when I try to open screen2 flex is considering me as another user though I am in the same application.
1) How can I use different components which are in different flex files as a same User ?
2) Should I place my <rtc:AdobeHSAuthenticator> and <rtc:ConnectSessionContainer> in the main application which calls the screen.mxml?
3) What is the best way to do it ?
Thanks for your time !

HT204053 Can I use one Apple ID for different itune stores in different regions?

I have itune store account in the UK. I can I use the same account to download an app. from a different store in a different region?

You cannot use other countries itunes stores.
Sorry

Migrating to Sharepoint 2013 from 2010 - Can you use the same URL for the Web Application without affecting the 2010 environment?

Hi,
I am currently trying to migrate our SharePoint 2010 environment to SharePoint 2013. The first thing I'm doing is creating a 2013 development environment to verify that this migration goes smoothly. I'm also doing this so that we will have a testing environment
after the upgrade to 2013 is complete.
So here is my question: I have a 3 tier farm including; 1 app server, 1 wfe, and 1 sql server. I have made a copy of our SharePoint 2010 database and installed that on our sql server 2012 sever (This new environment is on 3 completely separate servers from
our 2010 environment). I have also installed the prereqs and configured SharePoint 2013 on the App server and wfe servers, as well as configuring the necessary service applications (I have created a completely new 2013 database where I will migrate my 2010
database content when I'm ready).
I am now at the point where I need to create a new web application on the 2013 app server, where I will be migrating the copied 2010 database. (Also note that we have a 2010 development site called https://[email protected])
When I go to create a new web application in our 2013 dev environment, can I use the same url (https://[email protected]) to create this web app, or will this screw up our current 2010 dev environment?
I'm new to SharePoint migrations, so I apologize if this is a stupid question.
Thanks in advance for any insight you can share on this!
Boe Barlage

So, what you are recommending is that before I create a web application in my new 2013 environment, I need go into my hosts file on my 2013 app server and alter it to point to my 2013 wfe.
Then after I do that, then I can create my new web application on my 2013 app server with the same url as my 2010 testing environment
(https://[email protected]).
Then after that I should be able to access my new sharepoint 2013 environment at the same URL (https://[email protected])?
I must be missing something.
In your first reply, you told me to alter the host file on my 2010 app server and point it to my 2010
wfe (I guess I thought it probably already is). You also told me to alter the host file on my 2013 app server and point it to my 2013 wfe.
so I am confused on after I do this, what url would I access my 2010 test environment, and what url would
I access my 2013 test environment?
I am fine with having my test environment as a different URL until I am totally ready to roll everything over and kill the 2010 site. But I want to make sure that when I migrate my database, none of the site links are broken.
I also want to make sure that if I proceed this way, I want to be sure that I will be able to modify the URL to what my 2010 environment is (without a lot of headaches) when I am ready to kill the 2010 site.
Thanks again for your help, it's much appreciated!
Boe Barlage

Can I use two audio devices simultaneously ?

I have Mackie Onyx 1620 with firewire card and I have also MOTU 828. Both devices are linked together. When using Logic Express 8 there is list on preferences/audio/devices and on that list there are both Mackie and Motu. But I can choose only one device ? There are sometimes situations that I need more input channels than Mackie has ... How can I add MOTU channels on inputting?

You need to use the Audio MIDI Setup utility (Applications/Utilities) to setup an aggregate device. Check out this page for an explanation of how to do so:
http://www.apple.com/pro/techniques/aggregateaudio/

Using External Audio Device for FCP X

Hi,
How do I use my external audio hardware(RTA, MOTU, D01 Jünger) via firewire with FCP X?
It plays through Mac out only.
Cheers,
Marc

Hmmm... there is driver for all MOTU devices available. I checked on the motunation board and didn't find complaints about Lion and interfaces either. Sorry you're having this problem. This is copied from the motu site about the Lion driver:
MOTU Universal Audio Installer for Mac OS X
This package (version 1.6.50450) installs updated Mac OS X drivers and software for all MOTU FireWire, USB, Hybrid, and PCI-424 audio interfaces. The CueMix FX app now supports PCI-424 systems and replaces the legacy CueMix Console app. Mac OS X version 10.5.8 or later is recommended. Supports Mac OS X 10.7 (Lion). Supported MOTU products include:
2408mk3
24I/O
4pre
828mk3 (Hybrid and FireWire)
896mk3
8pre
Audio Express
HD192
MicroBook
UltraLite-mk3 (Hybrid and FireWire)
Traveler-mk3
Supported legacy MOTU products include the 1224, 1296, 2408, 2408mkII, 24i, 308, 828, 828mkII, 896, 896HD, Traveler, and the UltraLite.

Can you use different audio devices for different apps?

Similar Messages

Maybe you are looking for