Can you use GPS and Navigation on a 5230 without a...

Hi all,
I'm just wondering if you can use the Maps software on a 5230 without a SIM card. It works perfectly well with one, but the sim I will use in this phone does not have a data package, so I don't want to use Maps if I can only get GPS data in conjunction with a data connection.
Could someone please advise?
Thank you!
John.

Hi GarfordJB
Yes you can as just put my 5230 into "Offline" profile, but bear in mind that takes longer to lock on to position as totally dependent upon Integrated GPS.
You would need to go to Menu > Applications > Location > Positioning > Positioning methods and disable all except "Integrated GPS" as per screenshot here:http://i50.tinypic.com/2lk4g1w.jpg
In Maps application click on "spanner" icon bottom left of screen > Internet and set "Connection" to "Offline"
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Can you use GPS and get Live Traffic while using Turn By Turn?

    I can see the traffic if I am not using the turn by turn but as soon as I get directions Somewhere the traffic does not display. I have to cancel the navigation so it appears. Is this normal? It does this on both apple maps and google maps.

    Can someone please help me?
    thanks

  • Can you use siri on the new ipod touch without wifi?

    Can you use siri on the new ipod touch without wifi?

    No. Siri requires an internet connection. It is done in the Cloud, not on the iPod.

  • Can you use GPS app while talking on the phone at the same time?

    Hi I'm just curious because I will be getting a iPhone 4 in May and I wanted to know if it's possible to be in a phone call while also using an GPS app?
    Does the GPS app use the data connection or the GPS signal or satellites?
    Thanks a bunch!
    Bruce

    Thanks and I also did some research and found out that with GPS active, if you load your route/directions prior to making a phone call the route will be cached and navigation still works. The GPS will tell you where you are along the route.
    But if you're on the phone and then try to load a map or navigation it will not load your route until it can download the map, meaning you will need to wait until you get off the phone call to download the info.
    So if you know you will need to use navigation, turn on your GPS, load your map/route to start navigation, then make your phone call. Makes sense to me now and if anyone needs to know here is the solution right here.
    Bruce

  • Can you use VGA and DisplayPort at the same time.

    I have a T500 with the ATI graphics. I currently have it set up with only a VGA monitor. I am wanting to also get the DisplayPort to VGA adapter. Will I still be able to use both external monitors and my laptop monitor? If anyone has done this let me know. I have read that you can use VGA and DVI but neither of my monitors have DVI.

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • Can you use Final Cut on the new Macbook without a firewire port?

    I have a new Mac Book and am SO aggravated about the lack of a firewire jack. before I go buy a new video camera, can you even import video to Final Cut Express with a USB camcorder since it seems to ask for a firewire connection? Please, if anyone has any suggestions I would love to hear them.

    Ziatron wrote:
    I have a new Mac Book and am SO aggravated about the lack of a firewire jack.
    So why did you buy it? Most Macs have Firewire.
    Most computers, never mind Mac, have Firewire... so you have to forgive him for assuming a premium-priced MacBook would have conformity to a common standard like Firewire 400.
    USB camcorders use formats that use high compression to store the video files thereby lowering quality. This may be good enough to give you "decent footage" if so, then you won't have a problem using a USB camcorder. However I have never been happy with the quality that a USB camcorder provides (they always look grainy to me).
    Moreover, AVCHD editing is a mess in it's current state. Files from camcorders may or may not work on the mac and even with a recent Intel machine and editing is very time consuming as there is lots of rendering needed to be done to output and archive projects. Clearly computing hardware and software has not caught up to AVCHD potential yet so it's astounding that Apple's consumer MacBook is incompatible with the way most people are transferring and editing video TODAY.

  • Can you use footnotes AND endnotes in the same document?

    I just found out today that I have to have both footnotes (for comments and annotations) and section endnotes (for citations), to follow the formatting guidelines for my thesis... do you know if it's possible to use both with Pages '09?  I've spent a long time formatting as it is and really don't want to transfer my document to Word or anything (since I'll lose some of my settings)...  I would appreciate any suggestions!  Thanks!

    The style of footnote/endnote is part of the Document settings so it appears that only one applies per document.
    You could switch between them and copy the endnotes as ordinary text into a document which has footnotes.
    That would be the only workaround I can think of.
    Peter

  • Could you please tell me, how can you, using Lookout and Field Point, program on/off relay actions using a calendar?

    It´s a on/off illuminating ssystem control. Shure the user will need a calendar programing tool to program weekdays, holidays, etc. on of functions.

    Hi Galileo,
    See the following for Lookout side of things:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000DBE90000&USEARCHCONTEXT_CATEGORY_0=_9_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_9_&UCATEGORY_S=0
    As for FieldPoint, you can talk to it from Lookout in couple of ways -- either directly using the native FieldPoint object, or via OPC using the OPCFieldPoint object.
    Based on the timers from above, you would turn On/Off the relays (on the RLY-420 module of your FieldPoint).
    That's in a nutshell. Write back if you have specific questions.
    Good luck!
    Khalid

  • In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

    Adobe Acrobat 9 Pro V9.4.0
    Win7 Pro x64
    Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
    Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
    Thanks in advance.

    See my response to this post

  • Can you use the same Apple ID on more than one MacBook Pro for updates and applications?

    We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID.  Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine?  I'm not sure how that works when you have multiple machines.

    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services.   So you can use the same Apple ID for up to 10 Macs associated with it.
    To create an Apple ID you need to enter  your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account.

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • Can you use home sharing betweeen a pc and a mac

    can you use homing sharing between a mac and a pc?

    in iTunes on both machines turn on home sharing from the advanced menu using the same Apple ID.
    have a look at this support article.

  • I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

  • Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Using a mac book pro !
    Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Good question bigboggerchoot.  I also would like to know the answer to this.

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

Maybe you are looking for

  • Why am I getting an error when I try to update my Airport software?

    I'm trying to update my using Airport Utility software and I get the error that it can not find the airport.msi file? I've looked for the file on my PC and on the original install disk and can't find it? What am I doing wrong or is this an Apple issu

  • Placing Components in FlowLayout

    I have to place fixed size panels inside a panel which in flowlayout. How to place those fixed size panels inside that container panel in both the directions horizontal and vertical?... After that, the container panel must be added to a JScrollPane..

  • How to update not all attributes with MRU ?

    Hi, I've a table with four attributes. Two of them are filled (by an insert) in the beginning of the year. The other two have to be filled in during the year. I want an MRU-process that only shows the first two attributes and enables to udate the las

  • Monitorsing Infoprovider Requests

    Hi, Is thr any way to monitor the requests of an infoprovider using admincockpit in BI ?? I somewhere heard about it please confirm me abt that . Regards, Sandy

  • [Solved] - VirtualBox XP guest Hangs After Hibernating

    Pausing before hibernating doesn't help either. http://forums.virtualbox.org/viewtopic.php?f=7&t=26622 Disabling Vt-x extension solved it. I'm not sure about the performance impact. But so far, it isn't noticeable. From what I've read, Vt-x with nest