Can you use Podcasts on generation 1 or 2 Nano's
I'm trying to sync my iPod to add Podcasts that I have downloaded to my (either 1st generation or 2nd generation) nano from itunes. All that is showing up is music. Any help?
Hello Vegas120,
And welcome to Apple Discussions!
I'm trying to sync my iPod to add Podcasts that I have downloaded to my (either 1st generation or 2nd generation) nano from itunes. All that is showing up is music. Any help?
Yes, but only if they are audio only.
B-rock
Similar Messages
-
Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
Cheers, Tom -
Can you connect a 4th generation iPad to a printer with a cable?
Can you connect a 4th generation iPad to a printer with a cable?
And more specifically ringing over Wi-Fi uses AirPrint. The printer must be compatible with AirPrint. Not all printers are.
http://support.apple.com/kb/ht4356 -
Can standard DO can be used as Receiver Generation DO?
Can standard DO can be used as Receiver Generation DO? and the Std. DO can be mapped to RMM?
If not, then what are the difference in the features of Standard DO & Receiver Gen DO?Hi Romi
A Standard and RecGen DO are two different DO categories.
A data object category defines a default flow definition for a data object. When you create a data object, you choose the data object category you want to serve as its template. The newly created data object inherits the flow definition from the selected data object category.
You cannot use a Standard DO in place of a RecGen DO, coz they have fairly different functionalities.
Standard DO has the basic functionality of transferring the data between DOE and client and vice versa.
Where as Receiver generation (RecGen) data objects are used to generate the logical devices for the mobile clients for the purposes of distributing data to the appropriate subscribers. The fields defined in the receiver generation data object define the information to be extracted from the back end for storage in the device inventory. These fields are mapped to receiver meta model fields.
You can use the following link to clarify more doubts you may have:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/8f/0b674240449c60e10000000a1550b0/frameset.htm
Ask for more clarifications if you need any.
Ankur -
Can you use Apple TV with Face Time?
Can you use Face Time on a MacBook Pro with an Apple TV?
vazandrew wrote:
It's worth noting that Mirroring will only work with specific, fairly recent, Macs
http://www.apple.com/osx/specs/
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Infuriating but typical and predictably Apple.
0 of my 5 Macs will have Airplay capability.
AC
(Though the 2 I use most will at least run Mountain Lion). -
Can you use Apple TV and source films/music from two different Macs in the home?
Can you use Apple TV and source films/music from two different Macs in the home?
not at the same time but yes.
set up home sharing on both computers and Apple TV using the same Apple ID.
Setting up Home Sharing on your computer
Setting up Home Sharing for Apple TV (2nd generation) -
Can you use Apple TV in China?
not at the same time but yes.
set up home sharing on both computers and Apple TV using the same Apple ID.
Setting up Home Sharing on your computer
Setting up Home Sharing for Apple TV (2nd generation) -
Can you use a iPod nano 4G With iTunes 10
I was wondering can you use a iPod nano 4G with the new iTunes 10
Yes. All previous generations of your iPods should still work with the latest version of iTunes.
B-rock -
Can you homeshare with 4th generation ipod
Can i use my 4th generation ipod to homeshare with a computer? how......
Hello mjzbwhalen,
As long as you are running iOS 4.3 or later on your iPod touch (4th generation), you would be able to setup Home Sharing on your iPod.
The following article provides steps for setting up Home Sharing in iTunes, setting it up on your iPod, and how to play music using Home Sharing:
iOS: Setting up Home Sharing on your device
http://support.apple.com/kb/ht4557
Thank you for using Apple Support Communities.
Best,
Sheila M. -
What other sites can you use with Libsyn/Blubrry?
I noticed that Libsyn has an option to publish to blogger.
If you wanted to have a wordpress site, do you need to get another web host or can you use the storage of your podcast files, via FTP, to a few pictures, etc. for your podcasts' site?
One consistent complaint with Libsyn is how terrible their websites are, I don't mind blogger, but I'd like to know what my other options are...
Blubrry seems to have wordpress support as a normal feature.
could you use a google+ page as your podcasts' main site? Tumblr?
Thanks again!Pse 10 can use most of the plugins that work in the full photoshop.
Here are a couple of good links that should give you an idea of what plugins are out there:
http://thepluginsite.com/resources/index.htm
http://photoshop.pluginsworld.com/plugin.php?directory=adobe&software=photoshop -
Can you use the same Apple ID on more than one MacBook Pro for updates and applications?
We just got a few new MacBook Pro's and when I went to install updates it said I need to make an Apple ID. Can you use the same Apple ID and email address for that Apple ID on multiple machines, or do I need them both to be unique per machine? I'm not sure how that works when you have multiple machines.
An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. So you can use the same Apple ID for up to 10 Macs associated with it.
To create an Apple ID you need to enter your full name and your primary email address as your Apple ID. This will be used as the contact email address for your account. -
How many Ipods can you use with one Itunes account?
How many iPods can you use/sync with one iTunes account?
PT wrote:
Macistotle wrote:
Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
Patrick
So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance. -
Can you use a iTunes card to purchase more storage for iCloud
can you use a itunes card to purchase more storage for icloud
No. iTunes Store only.
"An iTunes Gift Card lets you shop for anything at the iTunes Store " > http://store.apple.com/us/browse/home/giftcards/itunes/gallery -
Can you use soundtrack pro's loops in your youtube videos or do you need to purchase a license since it is royalty free?
I understand they are royalty free, I am just confused about using the actual loops for films, videos, etc - if there is a special license you must purchase or what?
Yes sure, it's a library and may be used a lot - but is it legal or against agreement?
And to clarify - what about music I create on the program , that is ok right?If you purchased the software you have the right to use the loops that came with the software in the software to make whatever you want.
-
Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?
Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad
Maybe you are looking for
-
Ctxsys.context index on registered schema xmltype column
9iR2 Is it possible to create a text index (indextype is ctxsys.context) on a schema registered xmltype column? I tried it, the index creation works fine. After the first insert statement the Oracle process seems to hang. (CPU 100%, increasing memory
-
Hi All, The requirement is for workflow for PR release strategy. My requirment is I have 2 approvers. when PR is saved, mails are going to both the approvers at same time. But my scenario should be first mail should go to approver1 and once the appro
-
does it bring any harm or damage to the iphone 4s if let say there is a drop of water drop onto the iphone 4s RECEIVER??
-
HI all, I am testing a Z program for performance, I copied the Z program in to another Y program and did performance tuning. when i am running in background first Z program and then Y program Y perogram is giving less time. and if I am testing in the
-
Very slow performance transaction KKA2 - result analysis
Hi I am running T.code: KKA2. The performance is very slow. What could be the possible causilities? Regards Uday