Can you use regular ringtones as alert tones or is it just for calls

???

You can check by going into Settings- sounds - and see if your able to do so.   I believe you will also need to have the lasted IOS version.

Similar Messages

  • Can you use regular PCI cards in Mac Pro?

    My G5 is getting a bit long in the tooth and I want to buy a Mac Pro. It says that it supports PCI Express cards, but I have several PCI cards in my PowerMac. Since I don't want to buy them all over again, I was wondering if they will work in the Mac Pro?

    Hello Hatter,
    There is an external solution Now, (Thanks to a Genius named Markus) I have mine running a treat on My Macpro.
    http://discussions.apple.com/thread.jspa?messageID=7921458
    Cheers
    Tom K

  • HT3819 How can you use Home sharing to play music on an xbox 360 for example thats connected to the same WiFi network?

    My console is running under the same WiFi service as my itunes, iphone, and all the content i have saved in my library. How can i link, perhaps through HomeSharing, my content from my phone or computer to my xbox console?

    You can't.  Homesharing allow to share your iTunes content over Apple's devices.  XBox isn't made by Apple but Microsoft.

  • Can I use a D-Link DIR-505 as a repeater just for xbox 360?

    Most people who have a Time Capsule and xbox 360 here, know the woes of trying to get them to play nice together.  I've flat out given up and wired it.  But I really would like to have it wireless.
    Has anyone tried to use this D-Link DIR-505 as a repeater and/or bridge?  Or for that matter, any other device?  The added bonus is that the signal is boosted.  I originally wanted to get an Airport Express to do this same thing, but my guess is that the internals of the AExpress and the TC are the same and I'll just end up with the same problem.
    If someone can confirm that the AExpress works with the Xbox 360, I would rather get that. I've read that Apple routers get along best with other Apple products and not as great with non-Apple products.
    Any advice would be great!
    thanks.

    You would be better off buying a new router.. eg WNDR3800 netgear.. which is fully compatible with xbox.. better wireless than the TC.. has excellent third party firmware, openwrt, gargoyle, dd-wrt.
    Bridge your TC and use it for backups.

  • Can you use external hard drives with the HP Omni 10 5600US

    Since this a Windows tablet, can you use external hard drives with the HP Omni 10 5600US?
    I know there is a micro-sd reader for additional storage but can you use the usb for external hard drives like a regular pc?
    I tried looking at the spec's for this tablet and it said the usb port was host only. I'm not sure what that means exactly.

    Yes you can.  You'll need to purchase a USB OTG (on-the-go) cable.  I recommend using a drive that has its own power supply but I've successfully used small USB powered drives also.

  • How can you set a ringtone for unknown numbers

    How can you set a ringtone for unknown numbers?

    You can set up each one of your contacts with a ringtone and use the default for all other unknown numbers. There is no way to set up a ringtone for unknown numbers.

  • I need a ringtone to alert me when i have a missed call?  can someone help?

    i need a ringtone to alert me when i have a missed call?  can someone help?

    THere's generally some type of default notification for a missed call - I'm not sure the point though, if you're not with your phone to hear it ring then how are you going to hear the missed call notification?

  • Can you use airport extreme 802.11n for files backup

    Can you use airport extreme 802.11 for files back up and sharing

    You can if you connect a hard drive that has been formatted correctly to the USB port on the AirPort Extreme.
    Apple does not officially support Time Machine backups for this type of setup, but you could store regular files this way.

  • Can you use the apple remote to control tv programs?

    Can you use the apple remote control like a tv remote to control tv programs & DVDs on the computer? Everything I've found about the Apple Remote talks about using it for products other than desktops. I watch some regular tv shows on my iMac & would like to be able to use a remote control.
    I have a built-in infrared receiver.
    Thanks!

    You should be able to control DVD playback now with the Apple Remote. You may be able to get a bit of functionality with web sites by using Remote Buddy by using it as a virtual mouse and keyboard:
    http://www.macupdate.com/app/mac/21872/remote-buddy
    but you're not going to get anything close to the sort of functionality you'd get with a remote and a TV.
    Regards.

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

  • Downloaded ringtone and alert tone from itunes, showed on my phone, an hour later they were wiped??  cannot find them now? help (restarted, synched etc etc) same problem

    downloaded ringtone and alert tone from itunes, showed on my phone, an hour later they were wiped??  cannot find them now? help (restarted, synched etc etc) same problem

    Hi jaswantfromlondon,
    I apologize, I'm a bit unclear on the exact context for when or how these tones disappeared. If your tones have disappeared and you are having issues restoring them, you may find the information and steps outlined in the following article helpful (it refers specifically to 8.1.1, but the steps may more generally apply to your situation):
    Restore missing tones on your iPhone, iPad, or iPod touch running iOS 8.1.1 - Apple Support
    Regards,
    - Brenden

  • HT1947 Can you use a mobile hotspot on your iPhone 4s to control the remote app?

    Can you use your Iphone 4s as a moblie hotspot to control Itunes via the remote app?

    The camera roll is not part of the sync process at all.
    You should be importing these photos to your computer regularly as you would with any digital camera.  Youc an organize them on your computer and sync the to the iphone if you wish.
    The photos sync from the computer to the iphone is one way.
    The iphone mirrors the selected content of the computer to which it is synced.

  • Can you use old droid chargers on the droid turbo

    can you use the old chargers say droid razr maxx to charge your turbo?

    The Droid Razr Maxx charger will charge your Turbo but at a somewhat reduced rate of charge and take a  much longer time period to reach full charge. The "Turbo Charger" gives an increase in voltage that it delivers to higher than a regular 5 volt USB charger. This allows for a faster charge rate and the battery has been made and tested for this faster/higher heating range to be safe.  
    http://industries.ul.com/blog/qualcomm-quick-charge-2-0
    https://www.qualcomm.com/info/analys...m-quick-charge

  • Can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

    can you use color splash on a photo that was edited in black and white or do you have to mask the photo before editing it in black and white?

    I think you are asking whether it makes an difference whether you create the mask before or after you edit the black & white version. The answer is that since the color version and the b&w version are on different layers (as seen here), it makes no difference when you edit the b&w version.
    Also consider another technique that separates the color element in the image. Here, the area surrounding the color image is a line interpretation of the scene, similar to a Tone Line Conversion, a technique that was created with film many years ago.  (I am so old,  I still remember how it was done.) This is how to get the result similar to the one shown above but with a line illustration created in Photoshop replacing the b&w layer version:
    1. Open an image. This technique is more successful if the image you select has many clearly defined edges.
    2. Make a duplicate layer. (Cmd+J). It becomes Layer 1
    3. With Layer 1 chosen, go to Filter>Blur>Smart Blur. Set the Quality to High and the Mode to Edge Only. The default settings are Radius 3.0, Threshold 25.0. To increase the amount of detail in the line conversion, raise the Radius setting. Use the white-on-black illustration within Smart Blur as a guide. Then click OK.
    4. The line illustration will appear as white lines in a black background. To change this to black-on-white, choose Image>Adjustments>Invert.
    5. Insert a new layer below Layer 1. It will serve as the background for the line illustration. To do this, hold down the Command key while clicking on the New Layer symbol at the bottom of the Layers panel. It is the second symbol from the right. It will become Layer 2.
    6. Fill this new layer with a light color. To do this, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a light color and click OK.
    7. Choose Edit>Fill. Use: Foreground Color.  Mode: Normal. Opacity: 100% and click OK. Layer 2 will fill with the color. Although it will not appear in the image because Layer 1 is above it, a quick check of the Layers panel will confirm that the color you chose has filled Layer 2.
    8. Remove the white area from in Layer 1. Go to Layer 1. Choose the Magic Wand tool. Uncheck the Contiguous box in the Options Bar and click in a white area of the image. Next, click the Delete key.  Choose Select>Deselect to remove the marching ants. 
    9. (Optional)  You may now change the line illustration in Layer 1 from black to a dark color compatible with the color in Layer 2. To choose the color, click on the Foreground Color symbol in the Tools section. It will open the Color Picker. Choose a suitable dark color and click OK. While in Layer 1, click the first symbol next to the word  Lock:  in the Layers panel above Layer 1. This will prevent the dark color from appearing in the blank area of Layer 1. Choose Edit>Fill. Use: Foreground Color.  Mode: Normal. Opacity: 100% and click OK. The black lines will change to the dark color you chose.
    10. Combine Layers1 and 2: While in Layer 1, choose Layer>Merge Down. The layers are combined into a single layer called Layer 2.
    11.  Add a black mask to Layer 2 by clicking on the Mask symbol at the bottom of the Layers panel. It is the symbol to the right of the fx symbol. Where you would like full color objects to appear within the line rendition, paint in white on the black mask with a brush set to either soft-edge or hard-edge as the illustration and your taste dictate.  

  • HT1178 Can you use Time Capsule when your computer is partitioned with bootcamp?

    I know that if you attach a hard drive to "Airport Extreme" that you can not use the hard drive to back up a partitioned computer.  Can you using "Time Capsule" ?

    Time Machine will back up the Mac OS X partition to the Time Capsule, but cannot back up the Windows one. This is the same with a regular external drive.
    (77240)

Maybe you are looking for

  • Select Count(*) and actual row are differ: 136 rows vs 65k x 7 rows

    Dear All, Good morning. Need your advices. We had a view which is running and producing output to excel files. But recently after one of ours database migration, it were producing differ result: Select Count(*) and actual row are differ: 136 rows vs

  • Line item dimensions and cardinality?

    hi all, how to identify nor use the cardinality relationship as well as the line item dimension? can anyone explain me about it. since i am trying to create an multi provider which enables to fetch data from 3 ods. regds Hari Chintu

  • Dynamic link in cfgid column

    Hi, I have the following: <cfquery name="lijstA" datasource=""> SELECT * FROM dev ORDER BY dev_typenr, dev_volgnr </cfquery> cfgridcolumn href="../data_nor.cfm?dev_id=<cfoutput>#lijstA.dev_id#</cfoutput>" target="blank" NAME = "dev_volgnr" header="ba

  • Oracle wont install

    When i double click on the setup icon it does something then i quits like it forgot what it was doing why is this. Im trying to install oracle personal edition on a windows profesional XP os. My setup is: 512 MB ram VIA 650 CPU 20 gig harddrive 52X c

  • Music from itunes will not sync with iphone 5

    I just upgraded from iphone 4 to 5 and didnt have time for verizon to sync my phone so i did it when i got home. the music from my itunes will not sync with my phone. it shows the music on the usage bar when the phone is plugged in but shows no conte