Can you use Sibelius sounds with Logic?

Sibelius comes with it's own orchestral sounds (Kontakt sounds). I know you can buy the Kontakt sounds separately BUT does anyone know if Logic will play the ones that exclusively come with Sibelius. I'm wondering if Sibelius comes with some code that doesn't let it share the instruments?
Anyone able to help?

The plugin only works in Sibelius, as far as I know. It's hard coded that way, because it's a Sibelius extra, not a general purpose plugin for use in other hosts.

Similar Messages

Can you use surround sound with the built-in optical out on dual 1.8 g5?

Ok here's the thing, I just got the new version of Final Cut Studio, and was wanting to set up my g5 to utilize the surround mixing capabilities of SoundTrack Pro 2.
I have verified that i'm getting 5.1 sound via Apple's DVD Player, but when i go to Applications-> Utilities->Audio MIDI Setup, I cannot configure the system for multiple channels. It only allows me to output stereo.
Is my assumption of being able to use the built-in optical out for 5.1 monitoring incorrect? Do I have to go buy a firewire/usb audio interface?
Info about my system:
I have a Bose Acoustimass 10 5.1 Speaker setup.
I have a Onkyo DR-C500 5.1 Receiver, which does dolby pro logic 2 and dts decoding.
The Onkyo Receiver is hooked up via the spdif optical output of my G5.
I have a Dual 1.8 G5 with this info about the Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)

NZane-
Greetings and welcome to the Apple boards.
The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
Luck-
-DaddyPaycheck

Can you use surround sound 5.1home theatre systems with iMac 27"?

Can you use surround sound 5.1 home theatre systems with iMac 27"? I was thinking of using my iMac as an internet television as well as home pc. thanks

NZane-
Greetings and welcome to the Apple boards.
The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
Luck-
-DaddyPaycheck

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Can you use two duetts on logic at the same time

can you use two duetts on logic at the same time so i can have inserts

tracktor wrote:
can you use two duetts on logic at the same time so i can have inserts
Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
Maybe that's changed.. not sure.
pancenter-

Can you use nike+ sensor with iPhone 5

can you use nike+ sensor with iPhone 5. like the device you place in your shoe. Can it be connected to your phone.

However, you don't need the sensor if you use the Nike+ Running app. It uses the phone's built in accelerometer.

(261718088) Q: Can you use xm:multiple with Objects other than String?

Q: Can you use xm:multiple with Objects other than Strings?
<br>
A: You bet. Attached find a text file with some code from the example I showed
today, a version of the multipleSayHiTo() method that has a parameter of an Array
of Person objects rather than a parameter of an Array of Strings. The code within
the text file comes from the Greeting.jws file (the Greeting Web Service).
[multiple.txt]

So you are saying that the recovery discs I made do include the copy of windows that was originally installed?
Absolutely! They will restore the hard disk to its original out-of-the-box contents. Follow the instructions in the section Restoring from recovery DVDs/media, which begins on p. 73 of the User's Guide.
Satellite A660 Series User’s Guide
maybe i can make a deal with wd to have them swap this drive out for the BEKT instead...
That would be a good idea in any case.
As I said, the 10-fc12-045d error would not be due to the drive's being AFT, but more likely the discs are not being read properly. New discs can be obtained from Toshiba. Scroll down to Get Recovery Media here
-Jerry

Can you use Time Capsule with any wifi extender?

Can you use Time capsule with any wifi extenders?

No, since Apple designed their routers to only work with other Apple routers.
I suppose that it is possible that another brand might work, but since you won't know this until you try, it would be a good idea to have a clear understanding of the store's return policy before you decide to gamble.

Can I use MainStage 2 with Logic Express 9.1.6

Is it possible to use MainStage 2 with Logic Express 9.1.6.? Are there any limitations to not having Logic Pro 9. I'm very happy with LE9.1.6. as it meets all my needs (perhaps with the exception of not having Space Designer) but if I need to upgrade to get the most out of MainStage 2 then I will.
Thanks.

Actually I have found a way for at least the instrument plug ins to be accessed.
I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
If not already installed, get SoundFlower. After installing it.
A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
C) Press RECORD and start playing, LE captures Mainstage's sound.
I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

Can you use Apple TV with Face Time?

Can you use Face Time on a MacBook Pro with an Apple TV?

vazandrew wrote:
It's worth noting that Mirroring will only work with specific, fairly recent, Macs
http://www.apple.com/osx/specs/
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Infuriating but typical and predictably Apple.
0 of my 5 Macs will have Airplay capability.
AC
(Though the 2 I use most will at least run Mountain Lion).

Can I use rack effects with logic?

I am kind of interested in getting a rack effect such as the Digitech DSP 256XL Rack Mount Effects Processor. I am wondering if I could implement this with Logic. I currently use a Tascam USB audio interface with 2 inputs. I just want effects hardware instead of logic's effects. How would this work, if it would at all. Thanks a lot.

RyConn M.D. wrote:
I am kind of interested in getting a rack effect such as the Digitech DSP 256XL Rack Mount Effects Processor. I am wondering if I could implement this with Logic. I currently use a Tascam USB audio interface with 2 inputs. I just want effects hardware instead of logic's effects. How would this work, if it would at all. Thanks a lot.
Hi,
I use outboard all the time with my Logic.
I do have a 16 input and 16 output converters setup, so I can route to and from the external devices easily.
You can do the same, although if using the FX unit with your current interface you would do a "solo"ed send to the FX, and record the FX returns into Logic, then you could use the FX printed inside logic to play back the effect. This can be easy, or can be hard.
Usually when I do external FX, I do them when final mixing, and when I am "there" with the mix, I print the FX individually into new tracks, so I can recall the mix later on in a different studio, if I need to, or to archive it with the correct FX sounds in the DAW, for the label or artist.
Cheers

Can you use audio chat with PCs with microphones?

Is there a simple way to link audio chat between Windows and Mac?

You can audio-chat with a PC user with the latest version of AIM and a mic (on the PC). On the Mac side though, you need to have a camera (camcorder or iSight) plugged in. You cannot audio-chat with a PC AIM user without a camera.
I use my powerbook 1.33 GHz, iChat AV3 and my Sony DV camcorder (FW) to audio-chat with friends using PCs eqipped with AIM and just a mic. No problems at all.

Can you use the Grid with the Straighten Tool in the HUD?

A grid appears when using the mouse to straighten an image but not when using the more accurate sliders in the HUD! Doesn't make sense. Is it possible to turn the grid on when using the HUD?

gocuk2@yahoo. wrote:
Colin is under the impression the slider is the more accurate, but that is not the case on my machine. I assume therefore the slider is for course adjustment and the grid is to aid judgement were the finest control is available.
Hi Allan. Can you confirm that you cannot get 0.1º changes by clicking the slider arrows (on each side of the number to the right of the slider) while pressing {Option}?
I'm getting at least that level of precision. I say "at least" because sometimes I will get a change in the image with no change in the number. I assume that the change is measurable, but is rounded and therefore not shown in the control which shows only tenths.
On my machine there is no difference in precision between the slider with modifier keys and the on-image adjustment.

Can you use wifi sync with multiple libraries and multiple devices

Hi all
Does anyone know if you can use wifi sync with 1 computer, 2 libraries and 2 devices?
I have my wife's iPhone synced to 1 library and mine to another library but on the same computer. Will wifi sync work this way or do you need iTunes to be open to the correct library for it to work? As I know you can't have 2 instances of itunes open on the same computer.
Anyway thanks for any help

I have been looking more and more into this and it appears no.
You need to have iTunes running on the computer to enable it to wifi sync. You can use 2 devices on 1 library but if you don't have all the right options ticked you will then end up with each others stuff on each others device.
To enable wifi sync you need to have your iDevice connected to the same wifi network as your computer and iTunes open on that computer.
With my library open it detected my wife's phone and started to sync. Hasty push of cancel sync button lol.
There is a guide on here somewhere about multiple devices with 1 library which I can't find at the moment that tells you which options to tick so only your stuff stays on your device the the other half's on their device.
Its basically tick 'sync only ticked songs and videos' under summary of your device
Under apps take tick out of 'automatically sync new apps'
Then under edit->preferences click device and click prevent i's from syncing automatically
I think you should then be able to sync both devices to 1 library with mucking them up too much
Hopefully please correct me if I'm wrong
I have tried not doing the last step and asking it to open itunes automatically when phone is connected but this does not work with wifi sync
Have fun hopefully someone else can give us a better answer

Can you use a mouse with an ipad air?

We recently purchased an iPad Air. With my wife's work, sometimes she has to access a web site from home that uses adobe flash. we discovered a browser that allows her to access that site. Now because of the complexity of the site, she would need a keyboard and preferably a mouse. I know that you can sync a keyboard to the iPad using bluetooth. My question is, can you also sync a wireless mouse to the iPad? If you can sync both the keyboard and mouse, it would greatly reduce our need for a PC laptop. Any suggestions welcome.

You cannot use a mouse as it defeats the point of a MacBook. You can although have a keyboard for the iPad which allows word processing and simple things like typing emails. Hope this helps

Can you use Sibelius sounds with Logic?

Similar Messages

Maybe you are looking for