Can you view 3 categories at once?

I am working on organizing my iCal (I am finally trying to make the switch to using iCal as my primary address organizer), but I can't seem to find a way to view Groups, Contacts, and Contact Information (3 separate categories) all at the same time. 
The problem it presents for me is this: I travel for work a lot, and have categories for different cities.  When I create a category, such as;
Restaurants, L.A.
I can only see that category (on the left hand side) and the names of contacts on the right.  However, I can't necessarily remember where each individual restaurant (out of hundreds) is located.  Therefore, I am forced to individually click on each contact (which "flips" the page, allowing me now to only see Contacts on the left hand side, and Contact Information on the right hand side), verify what city it is in, then "flip" BACK to Groups/Contacts before I can organize it in the appropriate folder.  This may seem insignificant, but over the course of hundreds of entries, the time consumption is highly frustrating. 
I assumed that Apple would have included the capability to view all 3 categories at once (similar to how in Itunes you can view Genre/Artist/Album, etc.), but I have been unable to figure it out if it is there.
Again, I'd like be able to view Groups/Contacts/Contact Info all at the same time.  Is this at all possible?
If not, please Apple - add this to your next update.
Thanks for you time.

I think you are talking about AddressBook. In Snow Leopard it used to be 3 column as you describe but in Lion it has adoptd a iOS look. Lots of complaints here.
The more who send feedback the more likely it will get done.
For now all I can suggest is that that clicking on the bookmark ribbon will display groups and names.
There is also a third party utility that will display as 3 column.
You might try on MacUpdate

Similar Messages

  • HT1390 How long can you keep a movie rental, once it's downloaded? Do u need wifi to watch it?

    How long can you keep a movie rental, once it's downloaded? Do u need wifi to watch it?

    As long as it's been fully downloaded then you shouldn't need to be online in order to watch it.
    As to how long you have to watch it, from here :
    You have 30 days from the time of rental to watch your movie, and 24 hours (in the US) or 48 hours (elsewhere) after you've started viewing to finish it. Once the rental period expires, the movie will disappear from your iTunes library.

  • App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

    In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

    disregard post.

  • Can you view text outside of the canvas? as with the view menu you can see animation paths, bounding boxes and handles??? many thanks

    re: Motion 5
    can you view text outside of the canvas? as when using the view menu you can see animation paths, bounding boxes and handles???
    I'm in the middle of a text animation design treatment and unless my memory is completely failing I thought this was an option.
    An example would be selecting all layers and being able to see all bounding boxes and animation paths while moving along the timeline.
    Of course this could be quite a mess if you couldn't selectively chose which layers, its just with this current project it would be so helpful if
    I could see the text beyond the canvas to aid in my animations.
    many thanks,
    robert
    Motion 5
    2014 MacBook Pro 2.6Ghz i7
    16GB RAM
    OS X 10.9.5
    2011 Mac Pro
    4 Boot drives OS X 10.9.4, 10.10, 10.7, 10.8
    960GB OWC Mercury Accelsior_E2 PCI Express SSD (Current screaming fast boot drive)
    64GB RAM

    thanks for both of your responses
    I do understand shift + v " to "Show Full View Area" and shift + z to fill screen, etc.
    and command + & - for zooming
    what I'd like to do is selectively view, say, the text outside of the canvas as you can see the bounding box
    which contains the text or object when selecting one or all layers in the layers column
    I haven't used this feature in a while though I do recall using it in the past.
    Any help would greatly appreciated
    thanks,
    R.

  • Can you view which apps are being downloaded to iphone

    Can you view which Apps are being downloaded to an iphone?  Like a history?

    Tap App Store > Updates (bottom icons on right)

  • How can you view an event's time in the month mode of the calendar without clicking on it?

    How can you view an event's time in the month mode of the calendar without clicking on it?

    bbmca,
    Have you tried enlarging the month view window?

  • How can you view an application to a car head unit

    how can you view an application to a car head unit ( example) is the Motion X GPS

    What do you mean car head unit? Like another display?
    If you mean another display, it would only be supported by that specific app and car.

  • HT204088 Can you view purchase history on your iPhone?

    Can you view purchase history on your iPhone?

    You can view your recent purchase history, and optionally contact iTunes Support about a problem with one of them, via this page (it doesn't show purchase numbers, but does list the items and their prices) : http://reportaproblem.apple.com

  • Can you revert back to iPhoto once you updated to Photos

    Can you revert back to iPhoto once you updated to Photos?

    Can you revert back to iPhoto once you updated to Photos?
    The update to Photos leaves iPhoto installed, and also lets the iPhoto Library compatible with iPhoto. It creates a new Photos Library, that is sharing the photos with the iPhoto Library, so it will not need much extra space. You can use both libraries independently of each other. Edits you do in either library will not be visible in the other.
    Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
    Just do not uninstall iPhoto or delete the library, if you want an option to revert back. Also, make a full backup before doing the upgrade.

  • How can you view multiple windows?

    If you have got several internet topics open how can you get 'mini screens or windows' of each site dispalyed on the desk top?
    I have done this before but cant find how to do it again!
    Thank You
    Big-G-Zero
    ibook   Mac OS X (10.4.2)  

    Are you referring to the system-wide Exposé functions or a Safari-specific 'Exposé-esque' feature?
    The former can be configured in the 'Dashboard & Exposé' preference pane in System Preferences. Hitting tab with either 'All windows' or 'Application windows' displayed will allow you to browse through the various windows on a per application basis.
    The latter is available as part of Saft. With Saft installed, the 'Show Tab Thumbnails' under the 'View' menu will line up your 'mini screens or windows'.
    Yang

  • Can you remove all highlights at once instead of one at a time in a PDF?

    I have 12 PDF's that are 300-600 pages each where someone has highlighted large portions in gree, blue and yellow. I want to keep all yellow highlights and remove all green and blue. Is there a way to do this without having to delete the highlights from each individual page? Any assistance is greatly appreciated!
    Kevin

    Smitch1581 wrote:
    Can you please mark the question as answered so it will help others on the forum and give me 10pts :-)
    You going to buy a new car with 'em?

  • Can you search two artists at once in itunes

    I wanted to listen to two different artists and I know I can just make a playlist and that's that, but I was wondering if there was a way to search for both artists at once like perhaps if in the search bar i could type "dante; turtl"  and that would look for tracks that had either of those things instead of looking for tracks that had both of those things.

    You can sort of do that with the Column browser in List View, Max.
    Switch to List view. Now go "Edit > Column Browser > Show Column Browser". Make sure that one of the columns you have showing is "Artists".
    In the Artists column, select one of the artists. Now hold down the Control Key and click a different artist to select that as well. The music showing for you now will just be the stuff by those two artists, and you can listen to the mixture of both.
    For example, here's a "two artist mix" on my library:

  • Can you view a whole year in iCal, rather than just day, week, month?

    Does anyone know if there is a plug in or something (alternative app. even) that allows you to view the whole YEAR rather than just a month at a time? I want something that will function almost like a wall planner.

    I asked this question about two years ago! I'm surprised we still can't print a year calendar. I've been using an Apple Calendar program from 1996, which was fun because I could add icons, and frames, etc. I was using it up until last week when I installed Leopard. Gone is Classic and my calendar program along with it!
    Another problem I've had with iCal is the inability to print it in portrait mode. There was a work around on these boards that worked, but doesn't now. Sigh

  • Can you view Subreports in Crystal Viewer 2008

    I've created a report in Crystal Reports XI that also included two subreports.
    When I open it up in Crystal Viewer 2008 I'm not sure how to view the subreports.
    Any ideas?
    Thanks.

    In Crystal Viewer you cannot refresh the report. You can refresh only when you are opening the report from server. So if your report consist of any on demand subreports it refreshes only when you click on the link. So I thikn on-demand subreport do not work in crystal viewer.
    Regards,
    Raghavendra

  • Can you view network drives in Bridge?

    I am currently using a trial of CS4 and when I go to bridge to select the files that I want to import into Lightrooom ( the one thing I don't understand about lightroom not having a browser to see the pictures before you import, I think this is crucial to good workflow ) I am unable to see any of my network, however my 1.4 version of Lightroom can see all the network. I am probably doing something wrong can anybody help?

    I hate to say this but you sound a bit distressed and aren't understanding me.  I specifically stated that in my scenario I am able to view network items such as computers on the network that are unmapped but are connected to the network.  I can go into those computers by twirling the triangle and viewing the shared folders.  within those folders I can view items that are part of that drive.  I can ALSO see mapped network drives and their contents.  I did experience a single problem of not being able to view two large folders on a network computer but it did not say "building criteria".  Usually "building criteria" only appears if you are "searching" for something.  You might try waiting for the criteria to finish building which could take some time in Bridge, since when it takes this step it is searching according to index and non-index criteria.  If it is non-index then it will be slow to respond to your search.  If Bridge doesn't work properly you might try to contact Adobe customer support if you purchased the product recently and it is under warranty and registered to you.  You cannot, as you said, open a file in CS4.  CS4 includes Bridge and a host of other applications based on what version of CS4 you have.  Please try to be more specific when you post as to the steps you took to reach your point of difficulty with the software.  Network in Bridge is located under the "Desktop" icon in Windows.  You have to twirl the Desktop in order to see the Network.

Maybe you are looking for

  • Forms Web application is not working on FireFox Browser-with java plugin

    Hi All, We are running custom build forms application using forms 10g and application server 10 g Rel 2. We are using Java Plug-in 1.5.0_06. The application is working fine before recent update from firefox .Now it's not working and keep on asking ad

  • Hard Disc Not Exist

    To start at the beginning; Just under 3 years ago, my ex wife bought my daughter (then 12) an HP G56-105SA. A year ago my daughter moved back in with me, and brought it with her. Just the lap-top and power supply. No Recovery discs; no manuals; just

  • How to get plain text out of a multi line text field in Client Side Object Model?

    I am trying to read plain text from a MultiLineTextField in a List. This is how my code looks so far: //Get connection ClientContext context = new ClientContext("URL"); Web site = context.Web; context.Load(site); context.ExecuteQuery(); //Get list co

  • Error in Table T460B

    Hi, When i am trying to display the special procurement type in SPRO system giving message "Please Maintai Table T460B" Please help to resolve this issue. Regards Sandip

  • "Unauthorized" error occurs everytime I try to sync my iphone

    I'm trying to sync my apps in itunes using windows. I already set my computer to authorized but this error always keep on showing. I tried removing all authorized computer and re-authorized the laptop i'm using but still can't sync my phone.